ആമുഖം
Thank you for choosing the Fockety Paraffin Wax Machine. This device is designed to provide a soothing and moisturizing paraffin wax treatment for your hands, feet, and elbows. Regular use can help soften dry skin and provide relaxation. Please read this manual thoroughly before operating the machine to ensure safe and effective use.
പ്രധാനപ്പെട്ട സുരക്ഷാ മുൻകരുതലുകൾ
- Always unplug the machine from the power outlet when not in use, before cleaning, or before adding/removing wax.
- യന്ത്രം വെള്ളത്തിലോ മറ്റേതെങ്കിലും ദ്രാവകത്തിലോ മുക്കരുത്.
- കുട്ടികൾക്ക് ലഭ്യമാകാതെ സൂക്ഷിക്കുക.
- പവർ കോർഡിനോ പ്ലഗ്ഗിനോ കേടുപാടുകൾ സംഭവിച്ചാൽ മെഷീൻ പ്രവർത്തിപ്പിക്കരുത്.
- മെഷീൻ സ്ഥിരതയുള്ളതും ചൂടിനെ പ്രതിരോധിക്കുന്നതുമായ ഒരു പ്രതലത്തിലാണ് സ്ഥാപിച്ചിരിക്കുന്നതെന്ന് ഉറപ്പാക്കുക.
- Do not add water or other liquids to the wax pot. Only use paraffin wax specifically designed for paraffin baths.
- The wax will be hot. Always check the wax temperature before dipping hands or feet to avoid burns. The melting temperature of the wax is around 70 to 80℃. Allow it to cool to a comfortable temperature before use.
- Do not use on broken, irritated, or sensitive skin. Consult a doctor if you have any skin conditions or circulatory problems.
- Use the provided heat insulation board to prevent direct contact with the hot bottom of the pot.
പാക്കേജ് ഉള്ളടക്കം
എല്ലാ ഇനങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കാൻ പാക്കേജ് പരിശോധിക്കുക:
- 1 x Paraffin Wax Machine Host
- 1 x ലിഡ്
- 1 x ഉപയോക്തൃ മാനുവൽ
- 1 x Heat Insulation Board
ഉൽപ്പന്നം കഴിഞ്ഞുview
Familiarize yourself with the components of your Fockety Paraffin Wax Machine:

- ലൈനർ: The internal aluminum alloy pot where the paraffin wax is melted. Designed for constant temperature melting.
- ലിഡ്: Covers the wax pot to retain heat and prevent contamination.
- പവർ കോർഡ്: Connects the machine to the electrical outlet.
- ഇൻഡിക്കേറ്റർ ലൈറ്റ്: Illuminates to show the machine's operational status.
- സ്വിച്ച് നോബ്: Controls the power (On/Off) and heating settings.
- Heat Insulation Board: A separate board placed at the bottom of the wax pot to prevent direct contact with the hot surface and provide anti-scalding protection.

സജ്ജമാക്കുക
- പ്ലേസ്മെൻ്റ്: Place the paraffin wax machine on a flat, stable, and heat-resistant surface. Ensure it is away from water sources and flammable materials.
- Insert Heat Insulation Board: Place the heat insulation board at the bottom of the aluminum alloy liner inside the machine. This is crucial for safety.
- Add Paraffin Wax: Cut the paraffin wax block into small pieces or break it into smaller chunks. Place the wax into the aluminum alloy liner. Do not add water.
- Wax Level: Ensure the wax level is between the "Highest wax level" and "Lowest wax level" marks indicated inside the liner.
- പവർ ബന്ധിപ്പിക്കുക: Plug the power cord into a standard 110V US electrical outlet.


പ്രവർത്തന നിർദ്ദേശങ്ങൾ
Follow these steps for a safe and effective paraffin wax treatment:

- ഓൺ ചെയ്യുക: Rotate the switch knob from '0' (Off state) to '1' (On state). The indicator light will illuminate, signifying that the machine is heating.
- മെഴുക് ഉരുകുക: Allow approximately 10 minutes for the wax to fully melt. You may add a few drops of essential oil to the melted wax to increase lubricity, if desired.
- അൺപ്ലഗ് ചെയ്ത് തണുപ്പിക്കുക: Once the wax is completely melted, unplug the power supply. This allows the wax to cool slightly to a safe and comfortable temperature for dipping. Ensure the heat insulation board is in place to prevent burns from the bottom of the pot.
- താപനില പരിശോധിക്കുക: Before dipping, test the wax temperature on a small area of your skin (e.g., wrist) to ensure it is comfortable and not too hot.
- Dip Hands/Feet: When the temperature is suitable, slowly dip your hand or foot into the wax for about 5 seconds. Remove and allow the wax to solidify slightly. Repeat this process approximately 5 times to build up a thick layer of wax. If you cannot soak, you can use a brush to apply the wax.
- Gloves (Optional): For easier peeling, you may put on disposable gloves or cotton gloves over the waxed area.
- ശാന്തമാകൂ: Allow the wax to remain on your skin for about 10 minutes to maximize moisturizing and softening effects.
- വാക്സ് നീക്കം ചെയ്യുക: Gently peel off the wax. The removed wax can be placed back into the pot for reuse (can be used repeatedly 25-30 times).



മെയിൻ്റനൻസ്
- വൃത്തിയാക്കൽ: After use, allow the remaining wax to cool and solidify. Once solid, you can usually lift the entire block of wax out of the liner. If necessary, gently scrape any remaining wax from the liner using a non-abrasive tool.
- ബാഹ്യ ശുചീകരണം: ഒരു സോഫ്റ്റ്, ഡി ഉപയോഗിച്ച് മെഷീൻ്റെ പുറംഭാഗം തുടയ്ക്കുകamp തുണി. അബ്രാസീവ് ക്ലീനറുകൾ ഉപയോഗിക്കരുത് അല്ലെങ്കിൽ യൂണിറ്റ് വെള്ളത്തിൽ മുക്കരുത്.
- സംഭരണം: ഉപയോഗത്തിലില്ലാത്തപ്പോൾ തണുത്തതും ഉണങ്ങിയതുമായ സ്ഥലത്ത് യന്ത്രം സൂക്ഷിക്കുക.
ട്രബിൾഷൂട്ടിംഗ്
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| മെഷീൻ ഓണാക്കുന്നില്ല. | പ്ലഗ് ഇൻ ചെയ്തിട്ടില്ല; പവർ സ്വിച്ച് ഓഫ്; പവർ ഓtage. | Ensure the power cord is securely plugged into a working outlet. Turn the switch knob to '1'. Check your household's power supply. |
| Wax is not melting. | Machine not on; insufficient heating time. | Confirm the machine is turned on and the indicator light is active. Allow sufficient time (approx. 10 minutes) for the wax to melt completely. |
| Wax is too hot. | Insufficient cooling time after melting. | Unplug the machine and allow the wax to cool down to a comfortable temperature before use. Always test the temperature before dipping. |
സ്പെസിഫിക്കേഷനുകൾ
- ബ്രാൻഡ്: ഫോക്കറ്റി
- മോഡൽ: Focketyk7v02eib84-11
- മെറ്റീരിയൽ: ABS (body), Aluminum Alloy (liner)
- നിറം: White (machine body), Purple (lid)
- ശേഷി: 2.3 ലിറ്റർ
- ഇൻപുട്ട് വോളിയംtage: 110V (US Plug)
- ഉരുകൽ താപനില: Approximately 70-80℃ (after heating)
- പാക്കേജ് അളവുകൾ: 15.2 x 10.8 x 8.1 ഇഞ്ച്
- ഇനത്തിൻ്റെ ഭാരം: 2.35 പൗണ്ട്
വാറൻ്റിയും പിന്തുണയും
For any questions, concerns, or support regarding your Fockety Paraffin Wax Machine, please contact the manufacturer or your retailer. Refer to your purchase documentation for specific warranty details and contact information.





