BluMill Self-Inflating Air Bed User Manual

ആമുഖം

Thank you for choosing the BluMill Self-Inflating Air Bed. This manual provides essential information for the safe and efficient use of your new air bed. Please read these instructions carefully before setup and operation, and retain them for future reference.

ചിത്രം 1: The BluMill Self-Inflating Air Bed. This image shows the full view of the air bed, highlighting its grey flocked top surface and black PVC sides, with the integrated pump visible on one side.

സുരക്ഷാ വിവരങ്ങൾ

• ഇലക്ട്രിക്കൽ സുരക്ഷ: The integrated pump operates on electricity. Do not immerse the pump or power cord in water. Ensure hands are dry when plugging or unplugging the unit.
• അമിത പണപ്പെരുപ്പം: Do not over-inflate the air bed. Over-inflation can cause damage to the mattress and may lead to injury.
• ഭാര പരിധി: പരമാവധി ഭാര ശേഷി 100 കിലോഗ്രാം (220 പൗണ്ട്) കവിയരുത്.
• മൂർച്ചയുള്ള വസ്തുക്കൾ: Keep the air bed away from sharp objects, heat sources, and open flames to prevent punctures and damage.
• കുട്ടികളും വളർത്തുമൃഗങ്ങളും: Do not allow children or pets to play unsupervised on or near the air bed.
• താപനില: Avoid using the air bed in extreme temperatures, as this can affect the material's integrity.
• ഗാർഹിക ഉപയോഗത്തിന് മാത്രം: ഈ ഉൽപ്പന്നം ഗാർഹിക ഉപയോഗത്തിന് ഉദ്ദേശിച്ചുള്ളതാണ്.

പാക്കേജ് ഉള്ളടക്കം

എല്ലാ ഇനങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കാൻ പാക്കേജ് ഉള്ളടക്കങ്ങൾ പരിശോധിക്കുക:

• 1 x BluMill Self-Inflating Air Bed (Model 12079)
• 1 x Integrated Electric Pump (pre-installed)
• 1 x റിപ്പയർ കിറ്റ്
• 1 x ക്യാരി ബാഗ്

സജ്ജീകരണവും പണപ്പെരുപ്പവും

1. അൺപാക്ക്: Remove the air bed from its carry bag and unroll it on a clean, flat surface, free from sharp objects.
2. Locate Pump: Identify the integrated electric pump on the side of the air bed.
3. പ്ലഗ് ഇൻ: Connect the power cord of the integrated pump to a standard electrical outlet.
4. പെരുപ്പിക്കുക: Turn the rotary switch on the pump to the "INFLATE" position. The air bed will begin to inflate automatically.
5. പണപ്പെരുപ്പം നിരീക്ഷിക്കുക: The air bed will fully inflate in approximately 3 to 5 minutes. Monitor the firmness and turn the switch to "OFF" once the desired firmness is reached. Do not over-inflate.
6. അൺപ്ലഗ്: Disconnect the power cord from the electrical outlet and store it in the designated cable compartment on the pump.

ചിത്രം 2: Detail of the integrated electric pump. This image shows a close-up of the pump unit with a rotary switch for inflation and deflation, and the power cord compartment.

ചിത്രം 3: The BluMill Air Bed set up in a room, illustrating its use as a temporary sleeping solution. Icons below highlight key features: 1 Person Max 100kg, Built-in Pump, Optimal Support, and Inflates/Deflates in under 5 minutes.

Operating and Deflation

ദൃഢത ക്രമീകരിക്കുന്നു

The air bed's firmness can be adjusted during inflation. For a softer feel, stop inflation earlier. For a firmer feel, allow the pump to run longer, but always ensure not to over-inflate beyond the bed's capacity.

പണപ്പെരുപ്പവും സംഭരണവും

1. പ്ലഗ് ഇൻ: Connect the power cord of the integrated pump to an electrical outlet.
2. ഊതിക്കെടുത്തുക: Turn the rotary switch on the pump to the "DEFLATE" position. The pump will begin to extract air from the mattress.
3. Complete Deflation: Allow the pump to run until all air is removed and the mattress is flat. This typically takes 3 to 5 minutes.
4. അൺപ്ലഗ്: Disconnect the power cord and store it in its compartment.
5. മടക്കി സംഭരിക്കുക: Carefully fold the deflated air bed and place it into the provided carry bag for compact storage.

ചിത്രം 4: The practical carry bag included with the BluMill Air Bed. This black fabric bag allows for easy and compact storage and transport of the deflated mattress.

മെയിൻ്റനൻസ്

വൃത്തിയാക്കൽ

To clean the air bed, wipe the flocked surface and PVC sides with a damp cloth and mild soap. Do not use harsh chemicals or abrasive cleaners. Ensure the air bed is completely dry before storing.

Repairing Punctures

In case of a small puncture, use the included repair kit. Clean the area around the puncture, apply the patch according to the repair kit instructions, and allow sufficient time for it to cure before re-inflating the bed.

ട്രബിൾഷൂട്ടിംഗ്

• Air Bed Not Inflating:
  • പ്രവർത്തിക്കുന്ന ഒരു ഇലക്ട്രിക്കൽ ഔട്ട്ലെറ്റിൽ പവർ കോർഡ് സുരക്ഷിതമായി പ്ലഗ് ചെയ്തിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക.
  • Check that the rotary switch on the pump is set to the "INFLATE" position.
  • Verify there are no obstructions in the pump's air intake or output.
• Air Bed Not Holding Air / Losing Firmness:
  • Inspect the entire surface of the air bed for any punctures or leaks. Use soapy water to identify small leaks (bubbles will form).
  • Ensure the pump's rotary switch is fully in the "OFF" position after inflation to seal the air.
  • Check the valve cap (if applicable) for a secure seal.
  • Note that PVC material can stretch slightly during initial uses, which may give the impression of air loss. Re-inflate as needed.
• പമ്പ് പ്രവർത്തിക്കുന്നില്ല:
  • വൈദ്യുതി വിതരണം പരിശോധിക്കുക.
  • Ensure the pump has not overheated. If it has, unplug it and allow it to cool for at least 20 minutes before attempting to use it again.

സ്പെസിഫിക്കേഷനുകൾ

ചിത്രം 5: Diagram illustrating the dimensions of the BluMill Air Bed. The image clearly shows the length (191cm), width (99cm), and height (36cm) of the mattress.

വാറൻ്റിയും പിന്തുണയും

For warranty information, please refer to the documentation provided with your purchase or contact BluMill customer support directly. Keep your proof of purchase for any warranty claims.

If you encounter any issues not covered in this manual or require further assistance, please contact BluMill customer service through their official webഉൽപ്പന്നം വാങ്ങിയ സൈറ്റ് അല്ലെങ്കിൽ റീട്ടെയിലർ.