Narwal Zero-Tangling Floating Brush Instruction Manual

1. ആമുഖം

This manual provides essential information for the installation, maintenance, and proper use of your Narwal Zero-Tangling Floating Brush. This accessory is designed to enhance the cleaning performance of compatible Narwal robot vacuum models by effectively managing hair and pet fur without tangling.

Please read these instructions carefully before use to ensure optimal performance and longevity of the product.

2. ഉൽപ്പന്നം കഴിഞ്ഞുview

The Narwal Zero-Tangling Floating Brush features a unique design that prevents hair and pet fur from wrapping around the brush during operation. This innovative conical shape and single-arm structure guide debris directly into the dust bag, minimizing manual cleaning and maintaining consistent suction.

Image 2.1: The Narwal Zero-Tangling Floating Brush, showcasing its purple color and helical bristle design.

Image 2.2: Visual comparison demonstrating the zero-tangling capability of the Narwal brush versus a conventional brush with accumulated hair.

This brush has been certified by SGS and TÜV for its 0% tangle rate and 99.5% hair absorption rate, ensuring efficient and hassle-free cleaning.

Image 2.3: Diagram illustrating the conical shape, single-arm brush structure, and 50-degree optimal bristle alignment of the rollerbrush.

3. ഇൻസ്റ്റലേഷൻ

Follow these steps to install or replace the floating brush in your Narwal robot vacuum:

1. ഘട്ടം 1: Power off your robot vacuum and place it upside down on a clean, soft surface to prevent scratches.
2. ഘട്ടം 2: Locate the roller brush compartment cover on the underside of the robot. Open the cover by pressing the release tabs or unscrewing any retaining screws, as per your specific robot model's design.

Image 3.1: A hand opening the roller brush bottom cover on the robot vacuum.
3. ഘട്ടം 3: Remove the old roller brush. If it is stuck, gently pull it from both ends.
4. ഘട്ടം 4: Insert the new Narwal Zero-Tangling Floating Brush. Ensure that the ends of the brush align correctly with the slots in the robot's brush compartment. The brush is designed to fit in only one orientation.
5. ഘട്ടം 5: Close the roller brush compartment cover securely until it clicks into place or re-fasten any screws.
6. ഘട്ടം 6: Turn your robot vacuum back on.

4. പരിപാലനം

Regular maintenance of your floating brush ensures continued optimal performance.

• വൃത്തിയാക്കൽ ആവൃത്തി: It is recommended to inspect and clean the brush every 1-2 weeks, or more frequently if your household has a high volume of pet hair or long human hair.
• വൃത്തിയാക്കൽ നടപടിക്രമം:
  1. Remove the brush from the robot vacuum as described in the installation steps.
  2. The roller brush can be washed directly under running water. Use mild soap if necessary.
  
  Image 4.1: The roller brush being washed under running water.
  3. After washing, wipe the roller brush with a clean paper towel or cloth to remove excess water.
  

  Image 4.2: A hand wiping the roller brush with a paper towel.

  4. Allow the brush to air dry completely before re-installing it into the robot vacuum.
• മാറ്റിസ്ഥാപിക്കൽ: The lifespan of the brush depends on usage. Replace the brush when bristles show significant wear or if cleaning performance noticeably decreases.

5 അനുയോജ്യത

This Narwal Zero-Tangling Floating Brush is compatible with the following Narwal robot vacuum models:

• Narwal Freo Z Ultra
• Narwal Freo Z10
• Narwal Freo Pro
• Narwal Freo X Ultra
• Narwal Freo X Plus

Please verify your robot vacuum model before purchasing or installing this accessory.

6 സ്പെസിഫിക്കേഷനുകൾ

7. പ്രശ്‌നപരിഹാരം

• ബ്രഷ് കറങ്ങുന്നില്ല:
  • Ensure the brush is correctly installed and fully seated in its compartment.
  • Check for any obstructions (e.g., large debris, tangled strings) preventing the brush from rotating.
  • Verify that the brush compartment cover is securely closed.
• കുറഞ്ഞ ക്ലീനിംഗ് പ്രകടനം:
  • Clean the brush thoroughly as described in the Maintenance section.
  • Inspect bristles for wear. If significantly worn, consider replacing the brush.
• ബ്രഷ് ഏരിയയിൽ നിന്നുള്ള അസാധാരണമായ ശബ്ദങ്ങൾ:
  • Remove the brush and check for any foreign objects lodged in the brush or its compartment.
  • Ensure the brush is installed correctly and not rubbing against any internal components.
• Brush Gear Breakage:
  • If the plastic gear area of the brush breaks, the brush will need to be replaced. This can occur due to excessive force during installation or removal, or impact during operation. Handle the brush with care.

8. വാറൻ്റിയും പിന്തുണയും

For warranty information, technical support, or further assistance, please refer to the documentation provided with your Narwal robot vacuum or visit the official Narwal website. You may also contact Narwal customer service directly through their support channels.