ആർട്ടിലറി സൈഡ്‌വൈൻഡർ X3 പ്ലസ് 3D പ്രിന്റർ ഉപയോക്തൃ മാനുവൽ

1. ആമുഖം

This manual provides essential information for the safe and efficient operation of your Artillery Sidewinder X3 Plus 3D Printer. Please read this manual thoroughly before operating the printer and keep it for future reference.

Figure 1.1: Artillery Sidewinder X3 Plus 3D Printer Overview

The Artillery Sidewinder X3 Plus is a high-speed FDM 3D printer designed for both beginners and experienced users, featuring a large build volume and advanced functionalities.

സുരക്ഷാ മുൻകരുതലുകൾ

• പ്രിന്റർ എപ്പോഴും നന്നായി വായുസഞ്ചാരമുള്ള സ്ഥലത്ത് പ്രവർത്തിപ്പിക്കുക.
• Do not touch the hot nozzle or heated bed during operation.
• Keep children and pets away from the printer while it is in use.
• Ensure the power supply is stable and correctly connected.
• ഏതെങ്കിലും അറ്റകുറ്റപ്പണികൾ നടത്തുന്നതിന് മുമ്പ് പ്രിന്റർ അൺപ്ലഗ് ചെയ്യുക അല്ലെങ്കിൽ വൃത്തിയാക്കുക.

2. പാക്കേജ് ഉള്ളടക്കം

പാക്കേജിൽ എല്ലാ ഘടകങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:

• ആർട്ടിലറി സൈഡ്‌വൈൻഡർ X3 പ്ലസ് 3D പ്രിന്റർ
• 4.3-inch full-color touch screen
• പവർ കേബിൾ
• Tool Kit (e.g., wrenches, screwdrivers, spare nozzle)
• USB കേബിൾ
• SD Card / USB Drive with sample models and software
• Filament Sample

3. സജ്ജീകരണ ഗൈഡ്

3.1 അസംബ്ലി

The Artillery Sidewinder X3 Plus comes largely pre-assembled. Follow these steps to complete the setup:

Figure 3.1: Simplified Assembly Steps

The image illustrates the main assembly steps: 1. Attach the gantry to the base. 2. Secure the gantry. 3. Install the diagonal tie rods for stability. 4. Mount the filament holder. 5. Connect the touchscreen. 6. Connect the power cable.

1. Carefully remove the printer and all components from the packaging.
2. Attach the gantry (upper frame) to the base unit using the provided screws.
3. Connect the necessary cables between the gantry and the base, ensuring secure connections.
4. Install the diagonal tie rods to enhance structural stability during printing.
5. Mount the filament holder at the designated position.
6. Connect the 4.3-inch full-color touchscreen to the printer.
7. Ensure all screws are tightened and cables are properly routed and secured.

3.2 Initial Power-On and Interface

Once assembled, connect the power cable and turn on the printer. The 4.3-inch full-color touchscreen provides an intuitive interface for all printer functions.

3.3 ഓട്ടോമാറ്റിക് ബെഡ് ലെവലിംഗ്

The Sidewinder X3 Plus features a 7x7 (49-point) automatic bed leveling system for precise first layer adhesion.

Figure 3.2: Smart Auto Leveling System

The printer uses a 49-point advanced virtual heightmap calculation to ensure accuracy across the entire print bed, simplifying the leveling process for users.

1. Navigate to the "Leveling" or "Auto-Level" option on the touchscreen.
2. Initiate the automatic leveling process. The printer will probe multiple points on the print bed to create a mesh.
3. Once completed, the printer is ready for printing. Minor Z-offset adjustments may be required for optimal first layer quality.

4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

4.1 Loading Filament

The printer is equipped with a Dual Gear Direct Drive Extruder for powerful and stable filament propulsion.

Figure 4.1: Dual-Gear Direct Extruder Mechanism

This extruder design ensures consistent and precise filament feeding, leading to smoother model surfaces and reliable printing.

1. ഫിലമെന്റ് സ്പൂൾ ഫിലമെന്റ് ഹോൾഡറിൽ വയ്ക്കുക.
2. Preheat the nozzle to the recommended temperature for your filament type (e.g., PLA: 200°C, ABS: 240°C).
3. Insert the filament into the extruder's intake hole until it is gripped by the gears.
4. On the touchscreen, select the "Load Filament" option. The extruder will pull the filament through until it exits the nozzle.
5. Once filament flows smoothly from the nozzle, loading is complete.

4.2 ഒരു പ്രിന്റ് ആരംഭിക്കുന്നു

The Sidewinder X3 Plus supports high-speed printing up to 300mm/s.

Figure 4.2: High-Speed Printing Capability

Achieve faster print times with the printer's optimized drivetrain and acceleration capabilities, significantly reducing project completion time.

1. Prepare your 3D model using a compatible slicing software (e.g., Cura, PrusaSlicer) and save it as a G-code file ഒരു USB ഡ്രൈവിലേക്കോ SD കാർഡിലേക്കോ.
2. പ്രിന്ററിന്റെ നിയുക്ത സ്ലോട്ടിലേക്ക് USB ഡ്രൈവ്/SD കാർഡ് ചേർക്കുക.
3. On the touchscreen, navigate to "Print" and select your desired G-code file.
4. Confirm print settings and start the print. The printer will automatically preheat and begin printing.

4.3 Nozzle Auto-Cleaning

The printer features an auto-cleaning nozzle that supports printing up to 300°C, compatible with various filaments including PLA, TPU, PETG, ABS, and Nylon.

Figure 4.3: High-Temperature Auto-Cleaning Nozzle

The all-metal nozzle can reach temperatures up to 300°C, allowing for a wider range of filament materials. Its auto-cleaning function minimizes manual intervention.

The nozzle auto-cleaning function is integrated into the printer's startup routine or can be initiated manually via the touchscreen. This helps maintain optimal print quality by removing residual filament.

5. പരിപാലനം

5.1 പൊതു പരിചരണം

• Keep the printer clean and free of dust and filament debris. Use a soft brush or compressed air.
• Regularly check all screws and connections for tightness.
• Ensure the printer is placed on a stable, level surface. The metal diagonal tie rods contribute to stable printing by minimizing vibration.


Figure 5.1: Dual Z-axes and Dual Motors for Stability

The dual Z-axes and dual motors work in coordination to ensure stability and higher printing accuracy, reducing the need for frequent adjustments.

5.2 Print Platform Care

The PEI magnetic platform makes model removal easier.

Figure 5.2: Flexible PEI Magnetic Build Plate

The flexible PEI magnetic build plate allows for easy removal of printed models by simply bending the plate after it cools down.

• Clean the print surface with isopropyl alcohol before each print to ensure good adhesion.
• Avoid scratching the PEI surface with sharp tools.
• Allow the print bed to cool down before removing prints to prevent damage to the print or the surface.

5.3 Extruder and Nozzle Maintenance

• Periodically check the extruder gears for filament residue and clean as needed.
• If the nozzle becomes clogged, use the provided needle or a cold pull method to clear it. Refer to online resources for detailed instructions on cold pull.
• Ensure the hotend fan is clear of obstructions to prevent heat creep.

6. പ്രശ്‌നപരിഹാരം

പ്രവർത്തന സമയത്ത് നിങ്ങൾ നേരിട്ടേക്കാവുന്ന സാധാരണ പ്രശ്നങ്ങളെ ഈ വിഭാഗം അഭിസംബോധന ചെയ്യുന്നു.

For more detailed troubleshooting, refer to the official Artillery support resources or community forums.

7 സ്പെസിഫിക്കേഷനുകൾ

Figure 7.1: Large Build Volume

The generous build volume of 11.8 x 11.8 x 15.7 inches provides ample space for larger prints and batch production.

Figure 7.2: Overall Product Dimensions

The physical dimensions of the printer are 20 inches deep, 20 inches wide, and 26 inches high.

8. വാറൻ്റിയും പിന്തുണയും

For warranty information, technical support, and service inquiries, please visit the official Artillery webസൈറ്റിൽ ബന്ധപ്പെടുകയോ അവരുടെ ഉപഭോക്തൃ സേവന വിഭാഗവുമായി ബന്ധപ്പെടുകയോ ചെയ്യുക. വാറന്റി ക്ലെയിമുകൾക്കുള്ള വാങ്ങലിന്റെ തെളിവായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.

Official Artillery Store: Artillery Store on Amazon