ഗൂബേ 65586 LED ട്രാൻസ്ഫോർമർ 700 mA/20 W കോൺസ്റ്റന്റ് കറന്റ് ഡ്രൈവർ ഇൻസ്ട്രക്ഷൻ മാനുവൽ

1. ആമുഖം

This manual provides essential information for the safe and efficient installation and operation of your goobay 65586 LED Transformer. This compact LED driver is designed to supply constant current (CC) to LED lamps, effectively preventing flickering and heat-related wear of connected LEDs. Unlike constant voltage (CV) transformers, constant current drivers enable consistent light quality and brightness and ensure uniform current across all LEDs, even in series connections.

ഇൻസ്റ്റാൾ ചെയ്യുന്നതിന് മുമ്പ് ദയവായി ഈ മാനുവൽ നന്നായി വായിക്കുകയും ഭാവിയിലെ റഫറൻസിനായി സൂക്ഷിക്കുകയും ചെയ്യുക.

2. സുരക്ഷാ നിർദ്ദേശങ്ങൾ

മുന്നറിയിപ്പ്: Electrical installation should only be performed by qualified personnel. Incorrect installation can lead to electric shock, fire, or damage to the product.

• Ensure the power supply is disconnected before any installation or maintenance work.
• Do not exceed the maximum rated power of 20 W.
• This transformer is designed for indoor use only (IP20). Do not expose to moisture or direct water.
• Ensure proper ventilation around the transformer to prevent overheating. The flat design ensures low heat generation, but adequate airflow is still important.
• The product is approved for installation in furniture.
• This LED transformer is മങ്ങിയതല്ല.
• Maintain safe electronic isolation according to protection class II.

3. ഉൽപ്പന്നം കഴിഞ്ഞുview

The goobay 65586 LED Transformer is a compact constant current driver. It features screw terminals for quick and easy installation.

ചിത്രം 3.1: മുകളിൽ view of the goobay 65586 LED Transformer. This image shows the compact white casing with green end caps, displaying product labels and specifications.

Figure 3.2: The goobay 65586 LED Transformer with its protective green end caps removed, revealing the input and output screw terminals for electrical connections.

3.1 പ്രധാന സവിശേഷതകൾ:

• സ്ഥിരമായ വൈദ്യുതധാര ഔട്ട്പുട്ട്: 700 mA for stable LED performance.
• പവർ ഔട്ട്പുട്ട്: Maximum 20 W.
• ഇൻപുട്ട് വോളിയംtage: 220-240 V AC.
• Putട്ട്പുട്ട് വോളിയംtage: 17-28.5 വി ഡിസി.
• കോംപാക്റ്റ് ഡിസൈൻ: ഫ്ലാറ്റ് പ്രോfile for discreet installation, including in furniture.
• എളുപ്പമുള്ള ഇൻസ്റ്റാളേഷൻ: Integrated screw terminals.
• സുരക്ഷ: Protection Class II, SELV compliant.

4. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Follow these steps for safe and correct installation of the LED transformer.

1. പവർ വിച്ഛേദിക്കുക: Before starting any electrical work, ensure the main power supply to the circuit is switched off at the breaker.
2. വയറിംഗ് തയ്യാറാക്കുക: Strip approximately 5-7 mm of insulation from the ends of your input (AC) and output (DC) wires.
3. Connect Input (PRI):
   

   ചിത്രം 4.1: ക്ലോസപ്പ് view of the orange input (PRI) screw terminals on the goobay 65586 LED Transformer, labeled 'N' and 'L' for neutral and live connections.

   • Locate the input terminals labeled "PRI" (Primary) or "220-240 V" on the transformer.
   • Connect the live (L) wire from your AC mains to the 'L' terminal and the neutral (N) wire to the 'N' terminal. Secure the wires firmly using the screw terminals.
4. Connect Output (SEC):
   

   ചിത്രം 4.2: ക്ലോസപ്പ് view of the green output (SEC) screw terminals on the goobay 65586 LED Transformer, labeled '+' and '-' for positive and negative DC connections to the LEDs.
   • Locate the output terminals labeled "SEC" (Secondary) or "17-28.5 V" on the transformer.
   • Connect the positive (+) wire from your LED fixture(s) to the '+' terminal and the negative (-) wire to the '-' terminal. This transformer is designed for series connection of LEDs. Ensure the total voltage drop of your LED series falls within the 17-28.5 V range and the total power does not exceed 20 W.
   • Secure the wires firmly using the screw terminals.
5. മൗണ്ടിംഗ്: The transformer's compact and flat design allows for discreet mounting, such as behind cabinets or within furniture. Ensure the mounting location allows for adequate air circulation.
6. പവർ പുന ore സ്ഥാപിക്കുക: Once all connections are secure and verified, restore power to the circuit.

ചിത്രം 4.3: ഒരു മുൻample of the goobay LED transformer discreetly installed within a closet lighting setup, demonstrating its suitability for furniture integration.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Once correctly installed and powered, the goobay 65586 LED Transformer will automatically provide a constant current to the connected LED lights. No further user interaction is required for its basic operation.

• The transformer ensures a stable and flicker-free light output from your LEDs.
• This model is a constant current driver and is specifically designed for series connection of LEDs.
• As noted in the safety instructions, this transformer is മങ്ങിയതല്ല.

6. പരിപാലനം

The goobay 65586 LED Transformer requires minimal maintenance.

• വൃത്തിയാക്കൽ: Disconnect power before cleaning. Use a dry, soft cloth to wipe the exterior. Do not use liquid cleaners or solvents.
• പരിശോധന: Periodically check the wiring connections to ensure they remain secure. Inspect the casing for any signs of damage or overheating.
• നന്നാക്കൽ: Do not attempt to open or repair the transformer yourself. Refer all servicing to qualified personnel.

7. പ്രശ്‌നപരിഹാരം

If you encounter issues with your LED lighting system, refer to the following common troubleshooting steps:

8 സ്പെസിഫിക്കേഷനുകൾ

Figure 8.1: Detailed dimensions of the goobay 65586 LED Transformer, showing its length (102.6 mm), width (35.5 mm), and height (16.1 mm), along with its weight (56g).

9. വാറൻ്റിയും പിന്തുണയും

For warranty information and technical support, please refer to the documentation provided with your purchase or contact goobay customer service. Keep your proof of purchase for warranty claims.

Manufacturer: Wentronic GmbH

Contact information can typically be found on the product packaging or the official goobay webസൈറ്റ്.