ആമുഖം
The MAXHUB WIB10A Display Top Rack is designed to provide a stable and convenient mounting solution for various devices, including soundbars, webcams, and microphones, on top of your display. Its simple design ensures compatibility with a wide range of display types, offering a secure fit for your peripherals.
സുരക്ഷാ വിവരങ്ങൾ
- Ensure the rack is securely placed on a stable display surface before attaching any devices.
- Do not overload the rack beyond its intended weight capacity.
- കുട്ടികൾക്ക് ലഭ്യമാകാതെ സൂക്ഷിക്കുക.
- തീവ്രമായ താപനിലയിലോ നേരിട്ടുള്ള സൂര്യപ്രകാശത്തിലോ ഉൽപ്പന്നം തുറന്നുകാട്ടുന്നത് ഒഴിവാക്കുക.
- Do not attempt to modify or disassemble the rack.
പാക്കേജ് ഉള്ളടക്കം
പാക്കേജിൽ എല്ലാ ഇനങ്ങളും ഉണ്ടോ എന്ന് ദയവായി പരിശോധിക്കുക:
- MAXHUB WIB10A Display Top Rack (1 unit)
- Instruction Manual (English, Chinese) (1 copy)
Image: The MAXHUB WIB10A Display Top Rack, a black metal frame designed to sit on top of a monitor, providing a stable platform for accessories. It features a flat top surface with cutouts and a U-shaped support leg.
സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
Follow these steps to properly set up your MAXHUB WIB10A Display Top Rack:
- റാക്ക് സ്ഥാപിക്കൽ: Carefully place the MAXHUB WIB10A Display Top Rack on the top edge of your display. Ensure the front lip of the rack rests securely against the front bezel of the display, and the adjustable rear support leg is extended to provide stability against the back of the display.
- Adjusting for Stability: The rack features anti-slip processing on all contact surfaces to ensure a firm grip. Adjust the rear support leg as needed to achieve a level and stable position on your specific display model.
- ഉപകരണങ്ങൾ അറ്റാച്ചുചെയ്യുന്നു: The rack is equipped with a standard 1/4-inch screw. Align the 1/4-inch screw hole on your device (e.g., soundbar, webcam, microphone) with the screw on the rack. Tighten the screw clockwise until the device is securely fastened.
Image: A MAXHUB soundbar mounted on the display top rack. The image shows both a front view, where the soundbar sits neatly on top of the monitor, and a rear view, illustrating how the rack's support leg rests against the back of the display for stability.
ചിത്രം: ഒരു ക്ലോസ്-അപ്പ് view demonstrating the 1/4-inch screw mechanism on the MAXHUB display top rack. A hand is shown tightening a device onto the rack using the screw, highlighting the secure attachment method.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
Once installed, the MAXHUB WIB10A Display Top Rack operates passively as a stable platform. Ensure any attached devices are powered on and connected according to their respective manuals.
- ഉപകരണം സ്ഥാപിക്കൽ: Place your soundbar, webcam, or microphone on the rack's platform.
- സുരക്ഷിത അറ്റാച്ച്മെൻ്റ്: Use the integrated 1/4-inch screw to firmly secure compatible devices. This prevents accidental dislodgement.
- കേബിൾ മാനേജുമെന്റ്: Route any cables from your attached devices neatly to avoid clutter and ensure they do not interfere with the display or other equipment.
മെയിൻ്റനൻസ്
To ensure the longevity and proper function of your display top rack, follow these simple maintenance guidelines:
- വൃത്തിയാക്കൽ: Wipe the rack with a soft, dry cloth to remove dust. For stubborn marks, a slightly damp തുണി ഉപയോഗിക്കാം, തുടർന്ന് ഉടനടി ഉണക്കുക. അബ്രാസീവ് ക്ലീനറുകളോ ലായകങ്ങളോ ഉപയോഗിക്കരുത്.
- പരിശോധന: Periodically check the rack for any signs of wear or damage. Ensure the anti-slip surfaces are clean and intact.
- സംഭരണം: If not in use, store the rack in a cool, dry place away from direct sunlight and extreme temperatures.
ട്രബിൾഷൂട്ടിംഗ്
If you encounter any issues with your MAXHUB WIB10A Display Top Rack, refer to the following common problems and solutions:
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| Rack is unstable on the display. | Rear support leg not properly adjusted or display surface is uneven. | Adjust the rear support leg to ensure it firmly presses against the back of the display. Ensure the display is on a flat surface. |
| Device attached to the rack is loose. | 1/4-inch screw not tightened sufficiently or device is not fully compatible. | Ensure the 1/4-inch screw is fully tightened. Verify your device has a compatible 1/4-inch screw hole. |
| Anti-slip pads are not effective. | Pads are dirty or worn. | Clean the anti-slip pads with a damp cloth. If pads are worn, contact customer support for assistance. |
സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| മോഡൽ നമ്പർ | WIB10A |
| Dimensions (Width x Depth) | 160mm x 80mm (6.3 ഇഞ്ച് x 3.15 ഇഞ്ച്) |
| ഉൽപ്പന്ന ഭാരം | 320 ഗ്രാം (0.71 പൗണ്ട്) |
| നിറം | കറുപ്പ് |
| മൗണ്ടിംഗ് സ്ക്രൂ | 1/4-inch standard screw |
| മെറ്റീരിയൽ | Metal with anti-slip processing |
വാറൻ്റിയും പിന്തുണയും
This product comes with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official MAXHUB webസൈറ്റ്.
For technical support, troubleshooting assistance, or inquiries regarding replacement parts, please contact MAXHUB customer service through their official channels. Contact information can typically be found on the manufacturer's website or in the included instruction manual.
Note: The included instruction manual is available in English and Chinese.
