hygger HG121-8W 5-in-1 Aquarium Internal Filter Instruction Manual

ആമുഖം

Thank you for choosing the hygger HG121-8W 5-in-1 Aquarium Internal Filter. This versatile filter is designed to provide comprehensive water purification and circulation for your aquarium, offering multiple functional modes to suit various aquatic environments. Please read this manual thoroughly before installation and operation to ensure proper use and optimal performance.

ഉൽപ്പന്ന സവിശേഷതകൾ

• 5-in-1 Multiple Functions: Offers ventilation, rain shower, wave making, fountain, and water exchange capabilities.
• കാര്യക്ഷമമായ 3-എസ്tagഇ ഫിൽട്ടറേഷൻ: Utilizes biochemical sponges, activated carbon, and bio-balls for physical, chemical, and biological filtration, effectively removing odors and impurities.
• അൾട്രാ ശാന്തമായ പ്രവർത്തനം: Engineered with a super quiet motor, ensuring minimal noise during operation, even at maximum flow.
• Adjustable Flow Design: Allows adjustment of water flow rate, airflow rate, and wave direction to meet specific aquarium needs.
• ബഹുമുഖ ആപ്ലിക്കേഷൻ: Suitable for both freshwater and saltwater aquariums ranging from 2 to 13 gallons (8-50 liters).
• എളുപ്പത്തിലുള്ള ഇൻസ്റ്റാളേഷനും പരിപാലനവും: Equipped with strong suction cups for secure attachment and a removable design for simple cleaning.

പാക്കേജ് ഉള്ളടക്കം

ഇൻസ്റ്റാളേഷനുമായി മുന്നോട്ടുപോകുന്നതിനുമുമ്പ് എല്ലാ ഘടകങ്ങളും നിലവിലുണ്ടെന്ന് ദയവായി പരിശോധിക്കുക:

• hygger HG121-8W Internal Filter Unit
• Bioceramic Balls (pre-installed or separate)
• Biochemical Sponge (pre-installed or separate)
• Activated Carbon (pre-installed or separate)
• Rain Shower Bar and Connectors
• Aeration Tube
• ഫൗണ്ടൻ നോസൽ
• Adjustable Flow Knob
• Suction Cups (4x)
• DC 5V Adapter with USB Port

സജ്ജീകരണ നിർദ്ദേശങ്ങൾ

1. അൺപാക്ക് ചെയ്ത് പരിശോധിക്കുക: പാക്കേജിംഗിൽ നിന്ന് എല്ലാ ഘടകങ്ങളും ശ്രദ്ധാപൂർവ്വം നീക്കം ചെയ്യുക. എന്തെങ്കിലും കേടുപാടുകൾ ഉണ്ടോ എന്ന് പരിശോധിക്കുക.
2. ഫിൽട്ടർ മീഡിയ കൂട്ടിച്ചേർക്കുക: The filter unit typically comes with pre-installed media. If not, insert the biochemical sponge into the bottom compartment, followed by activated carbon, and then the bioceramic balls into the top compartment. Ensure they are seated correctly.
3. Attach Output Accessories:
   

   This image illustrates the various output accessories and how they connect to the filter head for different functional modes.

   • മഴ ചാറ്റൽ: Connect the rain shower bar to the filter's output nozzle.
   • വായുസഞ്ചാരം: Attach the aeration tube to the designated air intake port on the filter head.
   • Fountain/Water Exchange: Attach the fountain nozzle or appropriate connector for water exchange.
4. Secure Filter in Tank: Attach the four strong suction cups to the back of the filter unit. Submerge the filter completely in your aquarium water and press the suction cups firmly against the inner glass wall to secure it. Ensure the filter is positioned vertically and the water level is above the minimum water level mark indicated on the filter unit.
   

   This image shows the filter unit securely attached to the aquarium wall, with the rain shower output positioned above the water surface.

5. പവർ ബന്ധിപ്പിക്കുക: Plug the DC 5V adapter into a standard electrical outlet and connect the USB port to the filter's power cable.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

1. പവർ ഓൺ: Once the filter is properly installed and submerged, plug in the power adapter. The filter will begin operating immediately.
2. ഫ്ലോ റേറ്റ് ക്രമീകരിക്കുക: Use the adjustable flow knob located on the filter head to increase or decrease the water flow rate as desired.
3. Adjust Airflow (if using aeration): If the aeration tube is connected, you can adjust the amount of air introduced into the water by manipulating the air intake valve on the tube.
4. Change Functional Modes: To switch between functions (e.g., from rain shower to fountain), you may need to detach one accessory and attach another. Ensure the filter is unplugged before making any changes to accessories.

മെയിൻ്റനൻസ്

Regular cleaning is crucial for maintaining the efficiency and longevity of your filter. It is recommended to clean the filter every 1-2 weeks.

1. പവർ വിച്ഛേദിക്കുക: ഏതെങ്കിലും അറ്റകുറ്റപ്പണികൾ നടത്തുന്നതിന് മുമ്പ് എല്ലായ്പ്പോഴും പവർ സ്രോതസ്സിൽ നിന്ന് ഫിൽട്ടർ അഴിക്കുക.
2. Remove from Tank: Gently detach the filter from the aquarium wall.
3. Disassemble Filter: Carefully separate the filter compartments. Note the order of the filter media for correct reassembly.
   

   This image displays the filter's internal structure and the three types of filter media: bioceramic balls, biochemical sponge, and activated carbon.

4. ക്ലീൻ ഫിൽറ്റർ മീഡിയ: Rinse the biochemical sponge and bioceramic balls with old aquarium water (from a water change) to preserve beneficial bacteria. Do not use tap water directly, as chlorine can harm these bacteria. Activated carbon should be replaced every 2-4 weeks, or as needed, as its adsorptive capacity diminishes over time.
5. Clean Impeller and Housing: Use a small brush to clean the impeller and the impeller housing to remove any debris or algae buildup.
6. വീണ്ടും കൂട്ടിച്ചേർക്കുക, വീണ്ടും ഇൻസ്റ്റാൾ ചെയ്യുക: Reassemble the filter in the reverse order of disassembly, ensuring all parts are securely fitted. Reinstall the filter in the aquarium and reconnect power.

ട്രബിൾഷൂട്ടിംഗ്

സ്പെസിഫിക്കേഷനുകൾ

This image provides a detailed specification table for the HG121-8W model, alongside other variants, outlining dimensions, power, flow, and tank suitability.

വാറൻ്റിയും പിന്തുണയും

For warranty information or technical support, please contact hygger customer service through the retailer where the product was purchased or visit the official hygger webസൈറ്റ്. വാറന്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങലിന്റെ തെളിവ് സൂക്ഷിക്കുക.