Anderic FAN30R Ceiling Fan Receiver User Manual

ആമുഖം

This manual provides detailed instructions for the installation, operation, and maintenance of the Anderic FAN30R Ceiling Fan Receiver. The FAN30R is designed to enhance the functionality of compatible Harbor Breeze Ceiling Fans, specifically those requiring the U-shaped FAN-30R receiver, and integrates seamlessly with the Harbor Breeze FAN35T Remote Control (not included).

പ്രധാന കുറിപ്പ്: The Anderic FAN30R Receiver is not a replacement for Dawnsun FD30-H02R (FD30H02R), FD40-H02R (FD40H02R), or FD40-H03R receiver models. Please verify your existing receiver model before installation.

സുരക്ഷാ വിവരങ്ങൾ

ഉൽപ്പന്നത്തിന് പരിക്കേൽക്കുകയോ കേടുപാടുകൾ സംഭവിക്കുകയോ ചെയ്യാതിരിക്കാൻ ഇനിപ്പറയുന്ന സുരക്ഷാ മുൻകരുതലുകൾ എപ്പോഴും പാലിക്കുക:

• വൈദ്യുതി വിച്ഛേദിക്കൽ: Always disconnect power to the ceiling fan circuit breaker before installing, servicing, or cleaning the receiver. Failure to do so may result in electric shock or serious injury.
• യോഗ്യതയുള്ള ഇലക്ട്രീഷ്യൻ: Installation should be performed by a qualified electrician or a person with experience in electrical wiring to ensure proper and safe installation.
• വാല്യംtagഇ അനുയോജ്യത: Ensure the receiver's voltage rating (120V/60Hz) matches your electrical supply.
• ലോഡ് പരിധികൾ: Do not exceed the maximum load limits for the receiver: Max. downlight tungsten 240 watts or max. ballast 240 VA non-dimmer. Max motor 1A for ceiling fan only.
• ശരിയായ വയറിംഗ്: എല്ലാ വയർ കണക്ഷനുകളും സുരക്ഷിതമാണെന്നും ശരിയായി ഇൻസുലേറ്റ് ചെയ്തിട്ടുണ്ടെന്നും ഉറപ്പാക്കുക.
• പരിസ്ഥിതി വ്യവസ്ഥകൾ: Do not expose the receiver to moisture or extreme temperatures. Intended for indoor use only.

പാക്കേജ് ഉള്ളടക്കം

The Anderic FAN30R Ceiling Fan Receiver package typically includes:

• Anderic FAN30R Ceiling Fan Receiver (1 unit)
• നിർദ്ദേശ മാനുവൽ (ഈ പ്രമാണം)

Note: The FAN35T Remote Control is not included and must be purchased separately.

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Follow these steps to install the Anderic FAN30R receiver into your compatible Harbor Breeze ceiling fan:

1. പവർ വിച്ഛേദിക്കുക: Before beginning, turn off the power to the ceiling fan at the circuit breaker. Verify that the power is off by attempting to operate the fan or light.
2. Access Fan Canopy: Carefully lower the ceiling fan canopy to expose the wiring compartment.
3. Remove Old Receiver (if applicable): If replacing an existing receiver, carefully disconnect all wires from the old receiver and remove it. Note the wiring configuration for reference.
4. Install New Receiver: Insert the Anderic FAN30R receiver into the fan's mounting bracket or canopy. The U-shaped design is specifically made to fit certain Harbor Breeze models.
5. വയർ കണക്ഷനുകൾ: Connect the wires from the ceiling fan and house wiring to the FAN30R receiver according to the fan's wiring diagram and the receiver's labels. Ensure all connections are secure and insulated with wire nuts.
   

   ചിത്രം: മുകളിൽ view of the Anderic FAN30R receiver, showing the U-shaped body and the multi-colored wiring harness extending from one end. This view highlights the overall form factor and the connection points.
   

   Image: Angled side view of the Anderic FAN30R receiver, providing a clearer look at the wire connections and the ventilation slots on the side of the unit. The brown antenna wire is also visible.

   

   Image: Close-up side view of the Anderic FAN30R receiver, emphasizing the compact thickness and the arrangement of the connected wires. This perspective helps in understanding how the unit fits into tight spaces.

6. സുരക്ഷിത മേലാപ്പ്: Once wiring is complete and secure, carefully push the wires back into the canopy and reattach the canopy to the ceiling fan mounting bracket.
7. പവർ പുന ore സ്ഥാപിക്കുക: സർക്യൂട്ട് ബ്രേക്കറിൽ പവർ വീണ്ടും ഓണാക്കുക.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Pairing with Remote Control (FAN35T)

To ensure proper functionality, the Anderic FAN30R receiver must be paired with your Harbor Breeze FAN35T remote control. Follow these steps:

1. പവർ ഓൺ: Ensure the receiver is installed and power is supplied to the ceiling fan circuit.
2. Access Pairing Button: Locate the pairing button inside the battery compartment of your FAN35T remote control. You may need to remove the battery cover.
3. ജോടിയാക്കൽ ആരംഭിക്കുക: Press and hold the pairing button on the remote control for approximately 5 seconds.
4. സ്ഥിരീകരണം: The lights on your ceiling fan will blink twice to confirm that the pairing process was successful.

Once paired, you can use the FAN35T remote control to operate your ceiling fan's speed (3-speed functionality) and light functions.

മെയിൻ്റനൻസ്

The Anderic FAN30R receiver requires minimal maintenance. To ensure optimal performance and longevity:

• വൃത്തിയാക്കൽ: If necessary, gently wipe the exterior of the receiver with a dry, soft cloth. Do not use liquid cleaners or solvents.
• പവർ സൈക്കിളുകൾ: If the fan or receiver is unresponsive, try turning off the power at the circuit breaker for a few minutes, then restore power. This can sometimes reset the unit.
• ഈർപ്പം ഒഴിവാക്കുക: Keep the receiver dry and away from any sources of moisture.

ട്രബിൾഷൂട്ടിംഗ്

സ്പെസിഫിക്കേഷനുകൾ

Image: An alternative angled view of the Anderic FAN30R receiver, showing the overall shape and the wire connections from a different perspective, useful for understanding its physical integration.

ചിത്രം: താഴെ view of the Anderic FAN30R receiver, featuring a label with detailed specifications such as model number, wattage limits, and electrical ratings. This provides critical technical information directly from the unit.

വാറൻ്റിയും പിന്തുണയും

For warranty information or technical support regarding your Anderic FAN30R Ceiling Fan Receiver, please contact Anderic customer service directly. Refer to the product packaging or the official Anderic webഏറ്റവും പുതിയ കോൺടാക്റ്റ് വിശദാംശങ്ങൾക്കായി സൈറ്റ്.

നിർമ്മാതാവ്: Dan's Electronics Etc., Inc.

ഗ്ലോബൽ ട്രേഡ് ഐഡൻ്റിഫിക്കേഷൻ നമ്പർ (GTIN): 00191713242310