റെസ്റ്റ്മോ ഒ-എച്ച്ടി

RESTMO സ്പ്രിംഗ്ളർ ടൈമർ ഉപയോക്തൃ മാനുവൽ

മോഡൽ: O-HT | ബ്രാൻഡ്: റെസ്റ്റ്മോ

ആമുഖം

The RESTMO 2-Zone Programmable Water Timer is designed to automate your garden, lawn, and drip irrigation watering schedules. Featuring a durable brass inlet and independent zone control, this timer offers flexible programming options including automatic, manual, and rain delay modes to ensure efficient water management.

RESTMO 2-Zone Sprinkler Timer front view

ഫ്രണ്ട് view of the RESTMO 2-Zone Sprinkler Timer, showing the digital display, control buttons, and dual outlets.

ഉൽപ്പന്ന സവിശേഷതകൾ

Durability and Leak-Proof features of the timer

The timer features a pure brass inlet thread and a waterproof battery compartment for enhanced durability and leak protection.

കഴിഞ്ഞുview of timer features including LCD display and watering modes

ഒരു ഓവർview of the timer's key features, including its pure brass inlet, dual independent zones, LCD display, timed watering, manual watering, rain delay, compact design, and IP54 waterproof rating.

സജ്ജമാക്കുക

  1. ബാറ്ററികൾ ഇൻസ്റ്റാൾ ചെയ്യുക: Open the battery compartment on the back of the timer. Insert two (2) AAA 1.5V batteries (not included), ensuring correct polarity. Close the compartment securely.
    Battery compartment of the timer

    The battery compartment requires two AAA batteries.

  2. ഫ്യൂസറ്റിൽ അറ്റാച്ചുചെയ്യുക: Connect the brass swivel inlet of the timer to your outdoor faucet. Hand-tighten until secure. For optimal leak prevention, wrap Teflon tape around the faucet threads before attaching the timer.
    Diagram showing timer dimensions and connection points

    Detailed diagram illustrating the timer's dimensions, pure brass inlet, outlet threads, and control buttons.

  3. ഹോസുകൾ ബന്ധിപ്പിക്കുക: Attach your garden hoses or drip irrigation lines to the two independent outlets (Zone 1 and Zone 2) at the bottom of the timer.
  4. നിലവിലെ സമയം സജ്ജമാക്കുക: Rotate the main dial to "SET CLOCK". Use the "+" and "-" buttons to adjust the hour and minute. Press "OK/Manual" to confirm each setting.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Programming Automatic Watering

The timer allows you to set independent schedules for Zone 1 and Zone 2.

  1. സോൺ തിരഞ്ഞെടുക്കുക: Press the "ZONE" button to select either "ZONE 1", "ZONE 2", or "ZONE 1+2" (if you want both zones to follow the same schedule). The selected zone will be indicated on the display.
  2. ആരംഭ സമയം സജ്ജമാക്കുക: Rotate the dial to "START TIME". Use "+" and "-" to set the desired watering start time. Press "OK/Manual" to confirm.
  3. Set Watering Duration ("HOW LONG"): Rotate the dial to "HOW LONG". Use "+" and "-" to set the duration from 1 minute to 239 minutes. Press "OK/Manual" to confirm.
  4. Set Watering Frequency ("HOW OFTEN"): Rotate the dial to "HOW OFTEN". Use "+" and "-" to set the frequency from 1 hour to 12 hours, or 1 day to 7 days. Press "OK/Manual" to confirm.
  5. പ്രോഗ്രാം സജീവമാക്കുക: Rotate the dial to "ON". The timer will now operate according to your programmed schedule.
How Long and How Often settings on the timer

Visual guide for setting watering duration (How Long) and frequency (How Often).

Automatic watering setup on the timer

The timer's display showing automatic watering settings for duration and frequency.

മാനുവൽ നനവ്

To water immediately without affecting your programmed schedule:

  1. മാനുവൽ മോഡ് സജീവമാക്കുക: Long press the "OK/Manual" button. The display will show "MANUAL".
  2. Set Manual Duration: Use the "+" and "-" buttons to set the desired manual watering duration (from 1 minute to 7 hours 59 minutes).
  3. സ്വമേധയാ നനയ്ക്കൽ ആരംഭിക്കുക: Press "OK/Manual" again to start watering. The timer will automatically stop after the set duration.
  4. Stop Manual Watering (Early): To stop manual watering before the set time, rotate the dial to "OFF".
Manual watering and rain delay features

Instructions for activating manual watering by long-pressing the OK/Manual button, and for activating rain delay by long-pressing the +/Delay button.

Manual watering duration setting

The timer's display showing manual watering duration settings.

മഴ കാലതാമസം പ്രവർത്തനം

To temporarily pause your watering schedule due to rain:

  1. Activate Rain Delay: Long press the "+/DELAY" button. The display will show "DELAY".
  2. Set Delay Duration: Use the "+" and "-" buttons to select the desired delay period (0, 24, 48, or 72 hours).
  3. Confirm Delay: Press "OK/Manual" to confirm. The timer will pause for the selected duration and resume its programmed schedule afterward.
Rain delay options on the timer

The timer's display showing options for rain delay: 0, 24, 48, and 72 hours.

Stopping All Watering

To completely stop all watering programs and manual operations:

Timer dial set to OFF position

The timer's dial turned to the "OFF" position to stop all watering.

മെയിൻ്റനൻസ്

ട്രബിൾഷൂട്ടിംഗ്

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
Timer not watering.Low batteries, incorrect program, low water pressure, dial set to OFF.Replace batteries, check program settings, ensure water pressure is within 8-120 PSI, turn dial to ON.
കണക്ഷനുകളിൽ നിന്നുള്ള വെള്ളം ചോർച്ച.Loose connection, worn washer, missing Teflon tape.Ensure connections are hand-tight, check and replace rubber washers if worn, apply Teflon tape to faucet threads.
ഡിസ്പ്ലേ ശൂന്യമാണ് അല്ലെങ്കിൽ വായിക്കാൻ കഴിയാത്തതാണ്.Dead batteries, extreme temperatures.Replace batteries. If exposed to direct sunlight, move to a shaded area to cool down.

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

വാറന്റി വിവരങ്ങൾക്കും ഉപഭോക്തൃ പിന്തുണയ്ക്കും, ദയവായി ഉൽപ്പന്ന പാക്കേജിംഗ് പരിശോധിക്കുക അല്ലെങ്കിൽ ഔദ്യോഗിക Restmo സന്ദർശിക്കുക. website. You can also find additional resources and contact information on the ആമസോണിലെ റെസ്റ്റ്മോ സ്റ്റോർ.

അനുബന്ധ രേഖകൾ - ഒ-എച്ച്ടി

പ്രീview RESTMO 1-സോൺ വാട്ടർ ടൈമർ ഉപയോക്തൃ മാനുവൽ & സജ്ജീകരണ ഗൈഡ്
RESTMO 1-ZONE WATER TIMER (മോഡൽ O-HT-1A) നുള്ള സമഗ്രമായ ഉപയോക്തൃ മാനുവൽ. കാര്യക്ഷമമായ നനവിനായി നിങ്ങളുടെ ഓട്ടോമാറ്റിക് ഗാർഡൻ വാട്ടർ ടൈമർ എങ്ങനെ ഇൻസ്റ്റാൾ ചെയ്യാമെന്നും സജ്ജീകരിക്കാമെന്നും പ്രവർത്തിപ്പിക്കാമെന്നും ട്രബിൾഷൂട്ട് ചെയ്യാമെന്നും അറിയുക.
പ്രീview റെസ്റ്റ്മോ 4-സോൺ ഡിജിറ്റൽ വാട്ടർ ടൈമർ യൂസർ മാനുവൽ
റെസ്റ്റ്മോ 4-സോൺ ഡിജിറ്റൽ വാട്ടർ ടൈമറിനായുള്ള (മോഡൽ O-HT-3D) സമഗ്രമായ ഉപയോക്തൃ മാനുവൽ, കാര്യക്ഷമമായ പൂന്തോട്ട നനയ്ക്കലിനായി ഇൻസ്റ്റാളേഷൻ, സജ്ജീകരണം, പ്രവർത്തനം, ട്രബിൾഷൂട്ടിംഗ് എന്നിവ ഉൾക്കൊള്ളുന്നു.
പ്രീview റെസ്റ്റ്മോ O-HT-7 ഓട്ടോമാറ്റിക് വാട്ടർ ടൈമർ യൂസർ മാനുവൽ | ഗാർഡൻ ഹോസ് ടൈമർ ഗൈഡ്
റെസ്റ്റ്മോ O-HT-7 ഓട്ടോമാറ്റിക് വാട്ടർ ടൈമറിനായുള്ള സമഗ്രമായ ഉപയോക്തൃ മാനുവൽ. നനവ് പ്രോഗ്രാമുകൾ എങ്ങനെ സജ്ജീകരിക്കാം, മാനുവൽ നനവ്, നനവ് വൈകിപ്പിക്കുക, നിങ്ങളുടെ ഗാർഡൻ ഹോസ് ടൈമറിനുള്ള പൊതുവായ പ്രശ്നങ്ങൾ പരിഹരിക്കുക എന്നിവ എങ്ങനെയെന്ന് അറിയുക.
പ്രീview RESTMO 4-സോൺ ഓട്ടോമാറ്റിക് വാട്ടർ ടൈമർ യൂസർ മാനുവൽ
RESTMO 4-സോൺ ഓട്ടോമാറ്റിക് വാട്ടർ ടൈമറിനായുള്ള (മോഡൽ O-HT-9) ഉപയോക്തൃ മാനുവൽ, കാര്യക്ഷമമായ പൂന്തോട്ട നനവിനുള്ള ഇൻസ്റ്റാളേഷൻ, സജ്ജീകരണം, പ്രവർത്തന രീതികൾ (ഓട്ടോമാറ്റിക്, മാനുവൽ, കാലതാമസം), സവിശേഷതകൾ, ട്രബിൾഷൂട്ടിംഗ് എന്നിവ വിശദമാക്കുന്നു.
പ്രീview RESTMO O-HT-2A ഓട്ടോമാറ്റിക് വാട്ടർ ടൈമർ യൂസർ മാനുവൽ
RESTMO O-HT-2A ഓട്ടോമാറ്റിക് വാട്ടർ ടൈമറിനായുള്ള സമഗ്രമായ ഉപയോക്തൃ മാനുവൽ, കാര്യക്ഷമമായ പൂന്തോട്ട നനവിനുള്ള സജ്ജീകരണം, പ്രവർത്തനം, സവിശേഷതകൾ, ട്രബിൾഷൂട്ടിംഗ് എന്നിവ ഉൾക്കൊള്ളുന്നു.
പ്രീview റെസ്റ്റ്മോ 2-സോൺ ഡിജിറ്റൽ വാട്ടർ ടൈമർ യൂസർ മാനുവൽ | O-HT-3B സജ്ജീകരണവും ട്രബിൾഷൂട്ടിംഗും
Restmo 2-സോൺ ഡിജിറ്റൽ വാട്ടർ ടൈമറിനായുള്ള (മോഡൽ O-HT-3B) സമഗ്രമായ ഉപയോക്തൃ മാനുവൽ. കാര്യക്ഷമമായ പൂന്തോട്ട നനവിനായി നിങ്ങളുടെ വാട്ടർ ടൈമർ എങ്ങനെ ഇൻസ്റ്റാൾ ചെയ്യാമെന്നും സജ്ജീകരിക്കാമെന്നും പ്രവർത്തിപ്പിക്കാമെന്നും ട്രബിൾഷൂട്ട് ചെയ്യാമെന്നും അറിയുക.