ആമുഖം
This manual provides comprehensive instructions for the proper installation, operation, and maintenance of your System Sensor 2W-B i3 Series 2-Wire Photoelectric Smoke Detector. Please read this manual thoroughly before installation and keep it for future reference.
ഫീച്ചറുകൾ
- Photoelectric smoke detector with plug-in design for easy pre-wiring before installation.
- Drift compensation automatically adjusts sensitivity to minimize nuisance alarms from dust accumulation.
- Smoothing algorithms to reduce false alarms from short-term smoke and dust spikes.
- Removable detector cover and chamber for simplified cleaning and maintenance.
- Built-in remote maintenance signaling.
- Power Source: 12/24 VDC, Two-Wire.
- Visual Alert: Red LED.
- പ്രവർത്തന താപനില: 32°F മുതൽ 120°F വരെ (0°C മുതൽ 49°C വരെ).
- Standards: UL, CSFM.
പ്രധാനപ്പെട്ട സുരക്ഷാ വിവരങ്ങൾ
WARNING: This device is a smoke detector and not a fire alarm system. It is designed to detect smoke and provide a visual alert.
All life safety devices should be tested annually according to NFPA72 standards.
Do not paint the detector. Paint may interfere with the unit's ability to detect smoke.
This detector is not suitable for use in areas with high humidity or extreme temperatures outside the specified operating range.
സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
The System Sensor 2W-B i3 Series smoke detector features a plug-in design for easy installation.
അൺബോക്സിംഗും ഘടകങ്ങളും
Upon opening the package, you will find the smoke detector unit and an instruction guide. The detector consists of two main parts: the base, which connects to the wiring, and the detector head, which twists onto the base.
Image: Packaging of the System Sensor 2W-B i3 Series Smoke Detector, highlighting key features and certifications like UL and FM approval. The model number 2W-B is clearly visible.
വയറിംഗും മൗണ്ടിംഗും
This is a 2-wire system designed for 12/24 VDC power. Refer to the included wiring diagram in the instruction guide for specific connection details. The base plate should be securely mounted to the ceiling or wall.
Once the base is wired, align the detector head with the base and twist clockwise until it locks into place.
Note: Ensure power is disconnected before performing any wiring or installation.
ഓപ്പറേഷൻ
Once properly installed and powered, the detector will begin normal operation.
ഇൻഡിക്കേറ്റർ ലൈറ്റുകൾ
- Green LED (Normal Operation): A blinking green light indicates that the detector is receiving power and functioning correctly. This light typically blinks approximately once every minute.
- Red LED (Alarm Condition): A solid red light indicates that the detector has sensed smoke and is in an alarm state.
Image: A System Sensor 2W-B i3 Series Smoke Detector installed on a ceiling, showing its discreet profile and the green indicator light during normal operation.
വിപുലമായ കണ്ടെത്തൽ
The i3 Series incorporates drift compensation and smoothing algorithms to differentiate between actual smoke conditions and nuisance factors like dust or cooking fumes, reducing false alarms.
മെയിൻ്റനൻസ്
Regular maintenance is crucial for ensuring the continued reliability of your smoke detector.
വൃത്തിയാക്കൽ
The detector's cover and chamber are removable for easy cleaning. Gently vacuum or use a soft, damp cloth to remove dust and debris from the exterior and interior chamber. Do not use cleaning solvents.
ടെസ്റ്റിംഗ്
Test the detector monthly by pressing the test button or using approved smoke detector test spray. The red LED should illuminate, and the alarm should sound. If the alarm does not sound, replace the detector immediately.
Annual professional testing according to NFPA72 is recommended.
ട്രബിൾഷൂട്ടിംഗ്
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| പച്ച LED ഇല്ല | No power or wiring issue. | Check power supply and wiring connections. Consult a qualified electrician if necessary. |
| Frequent Nuisance Alarms | Detector location, dust accumulation, or environmental factors. | Clean the detector chamber. Relocate the detector away from cooking fumes, high humidity, or dusty areas. |
| Red LED On, No Smoke | Detector fault or sensitivity issue. | Clean the detector. If the issue persists, the detector may need replacement. |
| Alarm Does Not Sound During Test | Detector malfunction. | Replace the detector immediately. |
സ്പെസിഫിക്കേഷനുകൾ
- മോഡൽ: 2W-B
- കണ്ടെത്തൽ രീതി: ഫോട്ടോഇലക്ട്രിക്
- ഊർജ്ജ സ്രോതസ്സ്: 12/24 VDC, Two-Wire
- വിഷ്വൽ അലേർട്ട്: ചുവന്ന LED
- വ്യാസം: 5-19/64 inches (approx. 5.3 inches)
- ഉയരം: 2 ഇഞ്ച്
- ഇനത്തിൻ്റെ ഭാരം: 0.5 പൗണ്ട് (8 ഔൺസ്)
- പ്രവർത്തന താപനില: 32°F മുതൽ 120°F വരെ (0°C മുതൽ 49°C വരെ)
- മാനദണ്ഡങ്ങൾ: UL, CSFM
- UPC: 783863017599
- നിർമ്മാതാവ്: സിസ്റ്റം സെൻസർ
- മാതൃരാജ്യം: യുണൈറ്റഡ് സ്റ്റേറ്റ്സ്
വാറൻ്റിയും പിന്തുണയും
നിർമ്മാതാവിന്റെ വാറന്റി
This System Sensor 2W-B i3 Series Smoke Detector comes with a 3-year manufacturer's warranty. For warranty claims, please refer to the contact information provided in the original packaging or visit the manufacturer's webസൈറ്റ്.
സാങ്കേതിക സഹായം
For technical assistance or further inquiries, please contact System Sensor customer support.
ബന്ധപ്പെടാനുള്ള വിവരങ്ങൾ:
- Webസൈറ്റ്: www.systemsensor.com
- ഫോൺ: ഉൽപ്പന്ന പാക്കേജിംഗ് കാണുക അല്ലെങ്കിൽ webപ്രാദേശിക പിന്തുണ നമ്പറുകൾക്കായുള്ള സൈറ്റ്.
