TELESIN ഹാൻഡിൽബാർ മൗണ്ട് ഇൻസ്ട്രക്ഷൻ മാനുവൽ

1. ആമുഖം

This manual provides detailed instructions for the installation, operation, and maintenance of your TELESIN Handlebar Mount. This versatile mount is designed to securely attach action cameras and smartphones to various tubular structures, such as bicycle handlebars, motorcycle rearview mirrors, and other poles, enabling stable recording of your activities.

ചിത്രം 1.1: TELESIN Handlebar Mount. This image displays the complete handlebar mount assembly, including the clamp, ball head, and camera adapters.

2. പാക്കേജ് ഉള്ളടക്കം

താഴെ കൊടുത്തിരിക്കുന്ന എല്ലാ ഇനങ്ങളും നിങ്ങളുടെ പാക്കേജിൽ ഉണ്ടെന്ന് ദയവായി ഉറപ്പാക്കുക:

• 1x Handlebar Tube Mount
• 1x Adapter for GoPro (Two-leg Adapter)
• 1x Adapter for Insta360 (1/4" Thread Screw Adapter)
• 1x Locking Screw
• 1x പിൻഭാഗംview Mirror Soft Cushion (Silicone Gasket)

3 സുരക്ഷാ വിവരങ്ങൾ

To ensure safe operation and prevent damage to your equipment or injury, please observe the following:

• Ensure the mount is securely fastened to the desired surface before attaching any camera or device.
• Regularly check the tightness of all screws and connections, especially after prolonged use or exposure to vibrations.
• Do not overtighten screws, as this may damage the mount or the mounting surface.
• Avoid mounting in locations where it obstructs your view or interferes with the safe operation of your vehicle.
• This mount is designed for action cameras and lightweight devices. Do not exceed the recommended weight capacity.

4. ഇൻസ്റ്റാളേഷൻ ഗൈഡ്

Follow these steps to properly install your TELESIN Handlebar Mount:

1. Determine Clamping Diameter:

   Identify the diameter of the tube or bar where you intend to mount the device. The mount supports a clamping range of 22-38mm. For smaller diameters (9-15mm), use the included silicone gasket (rearview mirror soft cushion) inside the clamp താടിയെല്ലുകൾ.

   

   ചിത്രം 4.1: Clamping Diameter Options. This image illustrates how the mount adapts to different tube diameters, showing both small (9-16mm with cushion) and large (22-38mm without cushion) diameter clamping.

2. Cl സുരക്ഷിതമാക്കുകamp:

   cl തുറക്കുകamp by unscrewing the locking knob. Position the clamp around the desired tube. If necessary, insert the silicone gasket for a snug fit on smaller tubes. Tighten the locking knob until the clamp is firmly secured and does not move.

   

   ചിത്രം 4.2: Installation Steps. This image provides a visual guide for the installation process, including checking diameter, securing the clamp, attaching the adapter, and adjusting the ball head.
3. Attach Camera Adapter:

   Select the appropriate adapter for your camera:

   • For GoPro and similar action cameras, use the three-prong adapter.
   • For Insta360 cameras or smartphones (with a separate phone holder, not included), use the 1/4" thread screw adapter.

   Attach the chosen adapter to the ball head of the mount and secure it with the provided locking screw.

   

   ചിത്രം 4.3: Camera Adapter Options. This image shows the two types of adapters included: a three-prong adapter for sports cameras and a 1/4" screw adapter for Insta360 and smartphones (with a phone holder).

4. നിങ്ങളുടെ ഉപകരണം മൌണ്ട് ചെയ്യുക:

   Attach your action camera or phone holder (with phone) to the installed adapter. Ensure it is securely fastened.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The TELESIN Handlebar Mount features a 360° rotating ball head for flexible camera positioning.

1. ക്യാമറ ആംഗിൾ ക്രമീകരിക്കുന്നു:

   Loosen the knob on the ball head to allow for rotation and tilting. Adjust your camera to the desired angle and perspective. Once the desired position is achieved, tighten the knob firmly to lock the ball head in place.

   

   ചിത്രം 5.1: 360° Ball Mount. This image demonstrates the 360-degree rotation capability of the ball head, allowing for precise angle adjustments.
2. സ്ഥിരത ഉറപ്പാക്കുന്നു:

   Always ensure the ball head knob is fully tightened to prevent unwanted movement or vibration during recording, especially in dynamic environments like cycling or motorcycling.

6. പരിപാലനം

Proper maintenance will extend the lifespan of your TELESIN Handlebar Mount:

• വൃത്തിയാക്കൽ: മൗണ്ട് ഒരു സോഫ്റ്റ്, ഡി ക്ലീനർ ഉപയോഗിച്ച് തുടയ്ക്കുക.amp പൊടിയും അഴുക്കും നീക്കം ചെയ്യാനുള്ള തുണി. കഠിനമായ രാസവസ്തുക്കളോ ഉരച്ചിലുകളുള്ള ക്ലീനറുകളോ ഉപയോഗിക്കുന്നത് ഒഴിവാക്കുക.
• പരിശോധന: Periodically inspect the mount for any signs of wear, damage, or loose components. Pay attention to the clamping mechanism and the ball head.
• സംഭരണം: Store the mount in a clean, dry place when not in use.
• നാശ പ്രതിരോധം: The mount features corrosion-resistant stainless steel components for durability.

ചിത്രം 6.1: Quality Details. This image highlights key features such as the soft cushion for rearview mirror mounting and corrosion-resistant stainless steel components.

7. പ്രശ്‌നപരിഹാരം

If you encounter issues with your TELESIN Handlebar Mount, refer to the following common problems and solutions:

8 സ്പെസിഫിക്കേഷനുകൾ

9. വാറൻ്റിയും പിന്തുണയും

TELESIN provides a warranty for its products. If you encounter any issues or are dissatisfied with your TELESIN product for any reason, please contact our online customer support for assistance.

We are committed to resolving your problems quickly and efficiently and take full responsibility for the quality of our products.

For customer support, please refer to the contact information provided on the TELESIN official webസൈറ്റ് അല്ലെങ്കിൽ നിങ്ങളുടെ വാങ്ങൽ ഡോക്യുമെന്റേഷൻ.