ബ്രിട്ടാക്സ് വില്ലോ ബ്രൂക്ക് ട്രാവൽ സിസ്റ്റം യൂസർ മാനുവൽ

പ്രധാനപ്പെട്ട സുരക്ഷാ വിവരങ്ങൾ

Please read this entire manual carefully before assembling, installing, or using your Britax Willow Brook Travel System. Failure to follow these instructions could result in serious injury or death. Keep this manual in a safe place for future reference.

• Always secure your child in the car seat and stroller using the harness system.
• Never leave a child unattended in the car seat or stroller.
• Ensure all locking mechanisms are engaged before placing a child in the stroller or car seat.
• Do not use accessories or replacement parts other than those approved by Britax.
• Refer to your vehicle's owner's manual for specific car seat installation instructions and seating positions.

ഉൽപ്പന്ന ഘടകങ്ങൾ

The Britax Willow Brook Travel System includes the following main components:

• Britax Willow Infant Car Seat
• ബ്രിട്ടാക്സ് ആസ്പൻ ഇൻഫന്റ് കാർ സീറ്റ് ബേസ്
• Britax Brook Baby Stroller

ചിത്രം 1: കഴിഞ്ഞുview of the Britax Willow Brook Travel System, showing the Willow infant car seat, Brook stroller, and Aspen car seat base.

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

1. Britax Aspen Infant Car Seat Base Installation

The Aspen Infant Car Seat Base features ClickTight technology for secure installation using either the vehicle seat belt or lower connectors (LATCH).

1. സ്ഥാനനിർണ്ണയം: Place the Aspen base on the vehicle seat. Ensure it is level using the built-in level indicators. Adjust the spring-assist recline as needed to achieve the correct angle.
2. ClickTight Installation (Vehicle Seat Belt):
   • Open the ClickTight panel on the base.
   • Route the vehicle's lap and shoulder belt through the designated path.
   • സീറ്റ് ബെൽറ്റ് ബക്കിൾ ചെയ്യുക.
   • Remove all slack from the seat belt.
   • Close the ClickTight panel firmly until it clicks.
3. LATCH Installation (Lower Connectors):
   • Locate the lower anchor connectors on the base.
   • Attach the quick-push lower connectors to your vehicle's lower anchors. Ensure they click into place.
   • Tighten the LATCH strap to remove all slack.
   • Store unused lower connectors within the base.
4. സുരക്ഷയ്ക്കായി പരിശോധിക്കുക: After installation, firmly pull on the base at the belt path. It should not move more than one inch side-to-side or front-to-back.

ചിത്രം 2: The Britax Aspen Infant Car Seat Base, showing the ClickTight installation area and level indicators.

ചിത്രം 3: The underside of the Aspen base, illustrating the storage location for lower connectors when not in use.

2. Britax Willow Infant Car Seat Adjustment

The Willow car seat features the RightSize system for proper fit from 4 to 30 lbs.

• Adjust the harness straps to be at or just below your child's shoulders when rear-facing.
• Ensure the crotch buckle is positioned correctly to prevent slouching.
• Tighten the harness until it is snug against your child's body, with no slack. You should not be able to pinch any excess webതോളിൽ ബിങ്.

3. Britax Brook Stroller Assembly

Refer to the separate assembly guide included with your Brook Stroller for detailed instructions on attaching wheels, canopy, and other components.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

1. Attaching the Willow Car Seat to the Brook Stroller

1. Ensure the Brook stroller is fully unfolded and locked in the open position.
2. Align the Willow car seat with the stroller's car seat adapters.
3. Lower the car seat onto the adapters until it clicks securely into place.
4. Gently pull up on the car seat to confirm it is properly attached before use.

ചിത്രം 4: The Britax Willow infant car seat securely attached to the Brook stroller frame, ready for travel.

2. Stroller Modes (4 Ways to Stroll)

The Brook stroller offers four versatile ways to stroll, accommodating both infant car seats and reversible toddler seats.

• Infant Car Seat Facing Parent: Willow car seat attached to stroller, facing the parent.
• Infant Car Seat Facing Forward: Willow car seat attached to stroller, facing forward.
• കുട്ടികളുടെ സീറ്റിന് അഭിമുഖമായുള്ള രക്ഷിതാവ്: Stroller seat installed, facing the parent.
• മുന്നോട്ട് അഭിമുഖമായി നിൽക്കുന്ന കുട്ടികളുടെ സീറ്റ്: Stroller seat installed, facing forward.

ചിത്രം 5: Visual representation of the four strolling configurations available with the Britax Brook stroller, demonstrating its versatility.

3. One-Step Stroller Fold

To fold the Brook stroller:

1. Ensure the stroller seat is in the forward-facing position (if attached).
2. Locate the one-step fold mechanism (refer to your stroller's specific instructions for exact location).
3. Activate the mechanism and push down/forward to collapse the stroller.
4. Ensure the stroller locks into its folded position.

പരിപാലനവും പരിചരണവും

• ക്ലീനിംഗ് ഫാബ്രിക്: Spot clean fabric components with mild soap and cold water. Air dry. Do not use bleach.
• ഫ്രെയിം വൃത്തിയാക്കൽ: Wipe the stroller frame and car seat shell with a damp തുണി.
• ചക്രങ്ങൾ: Periodically check wheels for debris and ensure they rotate freely. Lubricate axles if necessary.
• ഹാർനെസ്: Inspect harness straps regularly for wear or damage. Replace if necessary.
• സംഭരണം: Store the travel system in a dry, cool place away from direct sunlight.

ട്രബിൾഷൂട്ടിംഗ്

സ്പെസിഫിക്കേഷനുകൾ

• ബ്രാൻഡ്: ബ്രിട്ടാക്സ്
• മോഡൽ: Willow Brook Travel System
• നിറം: Navy Glacier
• Car Seat Age/Weight Range: Rear-facing, 4 to 30 lbs
• Stroller Weight Capacity: 50 പൗണ്ട് വരെ
• ഹാർനെസ് തരം: 5-പോയിൻ്റ്
• Installation Type (Base): LATCH or Vehicle Seat Belt (ClickTight)
• ഉൾപ്പെടുത്തിയ ഘടകങ്ങൾ: Britax Willow car seat, Aspen base, Brook baby stroller
• അധിക സവിശേഷതകൾ: ClickTight Technology, Reversible Seats, Four Ways to Stroll, One-step Fold, Water-resistant canopy, Parent cup holder, Child snack tray.

വാറൻ്റിയും പിന്തുണയും

For warranty information, product registration, or customer support, please visit the official Britax webസൈറ്റിൽ ബന്ധപ്പെടുകയോ അവരുടെ ഉപഭോക്തൃ സേവന വിഭാഗവുമായി ബന്ധപ്പെടുകയോ ചെയ്യുക. വാറന്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങിയതിന്റെ തെളിവ് സൂക്ഷിക്കുക.

Britax Official Webസൈറ്റ്: us.britax.com