Webasto Air Top 2000 STC Diesel Heater User Manual

ഉൽപ്പന്നം കഴിഞ്ഞുview

ദി Webasto Air Top 2000 STC is a genuine air heater kit designed for various applications, including cabins, bunks, sleepers, or cargo areas. This 12VDC diesel heater offers an output range of 3070 BTU to 7000 BTU (0.9 kW to 2 kW), providing efficient heating. It is capable of operating for up to 22 hours on just 1 gallon of diesel fuel. Widely used in commercial truck applications, it is certified as an idle reduction device, contributing to fuel savings, reduced maintenance, cost efficiency, and lower pollution.

Image: Complete kit contents for the Webasto Air Top 2000 STC Diesel Heater, including the heater unit, wiring, fuel lines, exhaust, and air ducts.

ബോക്സിൽ എന്താണുള്ളത്

ദി Webasto Air Top 2000 STC kit includes all necessary components for installation and operation:

• ഹീറ്റർ യൂണിറ്റ്
• Smartemp Programmable Controller
• ഇന്ധന പമ്പ്
• അടിസ്ഥാന മുദ്ര
• Heater Wire Harness
• Fuel Pump Wire Harness
• ഇന്ധന ലൈൻ
• Fuel Tank Standpipe
• Flexible Stainless Steel Exhaust Tubing
• Combustion Air Tubing
• Flexible Cabin Air Ducting
• എയർ ലൂവറുകൾ
• ഓപ്പറേഷൻ/ഇൻസ്റ്റലേഷൻ മാനുവൽ

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Proper installation is crucial for the safe and efficient operation of your Webasto Air Top 2000 STC heater. It is recommended that installation be performed by a qualified technician. Refer to the included Operation/Installation Manual for detailed, step-by-step instructions specific to your vehicle or application.

പ്രധാന ഇൻസ്റ്റാളേഷൻ പരിഗണനകൾ:

• Mounting the Heater Unit: Securely mount the heater unit using the provided base seal to ensure proper sealing and vibration dampening.
• ഇന്ധന സംവിധാന കണക്ഷൻ: Install the fuel pump and connect the fuel line to the fuel tank standpipe. Ensure all fuel connections are tight and leak-free. Optional fuel tank tap kits (e.g., F0rd Transit Diesel Fuel Tank Tap Kit 10-7-0009, Promaster - Sprinter Fuel Tank Tap Kit 10-7-0010) may be required depending on your vehicle.
• ഇലക്ട്രിക്കൽ കണക്ഷനുകൾ: Connect the heater wire harness and fuel pump wire harness to the vehicle's 12VDC power supply, ensuring correct polarity and fusing as specified in the manual.
• Exhaust and Combustion Air: Install the flexible stainless steel exhaust tubing and combustion air tubing. Ensure exhaust gases are safely routed away from the vehicle's interior and air intake.
• Air Ducting: Connect the flexible cabin air ducting and air louvers to distribute heated air effectively within the desired space. Ensure ducting is free from kinks or obstructions.
• കൺട്രോളർ ഇൻസ്റ്റാളേഷൻ: Mount and connect the Smartemp 3.0 Bluetooth Controller in an accessible location for easy operation and programming.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

ദി Webasto Air Top 2000 STC heater is controlled by the Smartemp 3.0 Bluetooth Controller, allowing for precise temperature management and operational settings.

അടിസ്ഥാന പ്രവർത്തനം:

1. പവർ ഓൺ: Ensure the heater has a stable 12VDC power supply and sufficient diesel fuel.
2. കൺട്രോളർ ഇൻ്റർഫേസ്: Use the Smartemp 3.0 Bluetooth Controller to turn the heater on/off and adjust settings.
3. താപനില ക്രമീകരണം: Set your desired temperature using the controller. The heater will automatically adjust its heat output (between 3070 BTU and 7000 BTU) to maintain the set temperature.
4. വെന്റിലേഷൻ മോഡ്: The heater may also offer a ventilation-only mode for air circulation without heat. Consult your controller's specific instructions for this feature.
5. ഷട്ട് ഡൗൺ: To turn off the heater, use the controller. Allow the heater to complete its cool-down cycle before disconnecting power to prevent damage.

For advanced features, programming schedules, and Bluetooth connectivity, refer to the Smartemp 3.0 Bluetooth Controller user manual.

മെയിൻ്റനൻസ്

പതിവ് അറ്റകുറ്റപ്പണികൾ നിങ്ങളുടെ ഉപകരണത്തിന്റെ ദീർഘായുസ്സും മികച്ച പ്രകടനവും ഉറപ്പാക്കുന്നു Webasto Air Top 2000 STC heater. Always disconnect power before performing any maintenance.

• പൊതുവായ ശുചീകരണം: Keep the exterior of the heater unit clean and free from dust and debris. Ensure air intake and exhaust openings are unobstructed.
• ഇന്ധന സംവിധാനം പരിശോധിക്കുക: Periodically inspect fuel lines and connections for any signs of leaks or damage. Ensure the fuel filter (if applicable) is clean.
• Air Ducting Inspection: Check air ducts and louvers for blockages or damage. Ensure proper airflow for efficient heating.
• ഇലക്ട്രിക്കൽ കണക്ഷനുകൾ: എല്ലാ വൈദ്യുത കണക്ഷനുകളും സുരക്ഷിതമാണെന്നും തുരുമ്പെടുക്കാത്തതാണെന്നും ഉറപ്പാക്കുക.
• പ്രൊഫഷണൽ സേവനം: It is recommended to have the heater professionally serviced annually or as specified in the detailed manual, especially before the heating season, to check combustion components and overall system health.

ട്രബിൾഷൂട്ടിംഗ്

This section provides basic troubleshooting steps for common issues. For more complex problems or error codes displayed on the Smartemp controller, consult the comprehensive Operation/Installation Manual or contact Webasto support.

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

ദി Webasto Air Top 2000 STC heater comes with full Webasto backed warranty support for all products purchased from authorized distributors in the USA. For specific warranty terms and conditions, please refer to the warranty documentation included with your product or visit the official Webast webസൈറ്റ്.

If you require technical assistance, troubleshooting beyond this manual, or warranty service, please contact your authorized Webasto dealer or the Webasto customer support line. Ensure you have your product model number (5013913A) and purchase details available when contacting support.