ആമുഖം
The roborock Q5 Max+ Robot Vacuum is designed to provide an effortless and efficient cleaning experience for your home. Featuring powerful suction, intelligent navigation, and a convenient self-empty dock, this device simplifies your cleaning routine. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your robot vacuum to ensure optimal performance and longevity.

The roborock Q5 Max+ Robot Vacuum with its self-empty dock, ready for hands-free cleaning.
ബോക്സിൽ എന്താണുള്ളത്
Carefully unpack all components and ensure all items are present:
- Q5 Max+ Robot Vacuum
- യാന്ത്രിക-ശൂന്യമായ ഡോക്ക്
- പവർ കേബിൾ
- ഡസ്റ്റ്ബിൻ
- Dust Bag x 2 (1 pre-installed)
- സൈഡ് ബ്രഷ് x 1
- ഉപയോക്തൃ മാനുവൽ

All components included with the roborock Q5 Max+ Robot Vacuum.
സജ്ജമാക്കുക
1. Docking Station Placement
Place the Auto-Empty Dock on a hard, flat surface (wood, tile, concrete) flat against a wall. Ensure at least 0.3 m (1 ft) of clearance on either side and 1 m (3 ft) both in front and above the dock. Make sure the location has good 2.4 GHz WiFi coverage for optimal app connectivity.
2. പ്രാരംഭ നിരക്ക്
Connect the power cable to the Auto-Empty Dock and plug it into a wall outlet. Place the robot vacuum onto the dock to begin charging. The robot will indicate its charging status.
3. App Download & Connection
- Download the "Roborock" app from your mobile app store.
- Reset WiFi on the robot by pressing and holding the designated buttons until you hear the "Resetting WiFi" alert. The WiFi indicator will flash slowly.
- Open the app, tap "ഇതിനായി തിരയുക device," and follow the on-screen instructions to add your Q5 Max+ robot vacuum. Ensure your router uses a 2.4 GHz WiFi frequency for optimal performance.



Follow these steps to connect your robot vacuum to the Roborock app.
പ്രവർത്തിക്കുന്നു
1. അടിസ്ഥാന നിയന്ത്രണങ്ങൾ
The robot vacuum has physical buttons on its top for basic operations such as Start/Stop cleaning and returning to the dock.
2. ആപ്പ് നിയന്ത്രണ സവിശേഷതകൾ
The Roborock app provides extensive control over your Q5 Max+:
- Smart Mapping: The PreciSense LiDAR Navigation System creates detailed 3D maps of your home for efficient cleaning routes. It supports multi-level mapping for up to 4 floors.
- ഇഷ്ടാനുസൃത ക്ലീനിംഗ്: Set emptying modes, adjust suction intensity (5500 Pa HyperForce suction), and create custom routines.
- നിരോധിത മേഖലകൾ: Intuitively suggests and allows you to set virtual boundaries to keep the robot away from specific areas or prevent falls down stairs.
- ഷെഡ്യൂളിംഗ്: Schedule cleaning times for specific rooms or the entire house.
- ചൈൽഡ് ലോക്ക്: Activate child lock through the app or on the vacuum itself to prevent accidental starts.

The robot uses LiDAR for precise navigation and mapping.

Control various settings and cleaning modes through the Roborock app.
3. ശബ്ദ നിയന്ത്രണം
The Q5 Max+ is compatible with Alexa, Apple Siri, and Google Home. You can initiate cleaning, adjust settings, or send the robot back to its dock using simple voice commands.

Use voice commands with Alexa, Siri, or Google Home for hands-free operation.
മെയിൻ്റനൻസ്
1. Self-Empty Dock Dust Bag
The Auto-Empty Dock uses 2.5L disposable dust bags, allowing for up to 7 weeks of hands-free cleaning. When the bag is full, simply remove and replace it. The dock will automatically empty the robot's dustbin into the bag.
2. Robot Dustbin & Filter
While the dock self-empties, it's good practice to periodically check the robot's 770ml onboard dustbin and clean the filter. The filter is reusable but should be cleaned regularly to maintain suction performance.
3. DuoRoller Brush
The DuoRoller Brush efficiently collects dirt and pet hair. Periodically check the brushes for tangled hair and remove any debris. The design helps reduce tangling, but occasional manual cleaning is recommended.

The DuoRoller Brush effectively picks up hair and debris.
4. Side Brush & Sensors
Inspect the side brush for tangled hair or debris and clean as needed. Also, wipe down the cliff sensors on the underside of the robot periodically to ensure proper navigation and prevent falls.
ട്രബിൾഷൂട്ടിംഗ്
- Robot not connecting to WiFi: Ensure your router is set to 2.4 GHz. If your home primarily uses a 5 GHz band, consider setting up a dual-band router or switching to a 2.4 GHz network.
- Dustbin not emptying: Check if the dust bag in the Auto-Empty Dock is full or if there are any blockages in the dock's suction path. Ensure the robot's internal dustbin is properly seated.
- ബ്രഷുകളിൽ മുടി കെട്ടുപിണയുന്നു: Regularly remove hair from the DuoRoller Brush and side brush. The DuoRoller design minimizes tangles, but some accumulation is normal.
- റോബോട്ട് കുടുങ്ങിപ്പോകുന്നു: Ensure no small objects or loose cables are on the floor. The robot's obstacle avoidance is effective for larger items, but smaller items or low-lying furniture may cause issues.
- റോബോട്ട് ചാർജ് ചെയ്യുന്നില്ല: Verify the robot is correctly docked and the charging contacts on both the robot and the dock are clean.
- ഉപകരണം പുനഃസജ്ജമാക്കുന്നു: If the robot is unresponsive, refer to the app or the physical buttons for a reset option. This typically involves holding down specific buttons for a few seconds.
സ്പെസിഫിക്കേഷനുകൾ
| ബ്രാൻഡ് | റോബോറോക്ക് |
| മോഡലിൻ്റെ പേര് | Q5 Max+ |
| ഉൽപ്പന്ന അളവുകൾ | 13.8"L x 17.3"W x 16.7"H (Docked) |
| ഇനത്തിൻ്റെ ഭാരം | 7.5 Pounds (Robot) |
| സക്ഷൻ പവർ | 5500 Pa ഹൈപ്പർഫോഴ്സ് |
| ഡസ്റ്റ്ബിൻ കപ്പാസിറ്റി | 770 ml (Robot) |
| ഡസ്റ്റ് ബാഗ് കപ്പാസിറ്റി | 2.5 L (Dock) |
| പരമാവധി വാക്വമിംഗ് ഏരിയ | 3,767 ചതുരശ്ര അടി |
| പരമാവധി പ്രവർത്തനസമയം | 240 മിനിറ്റ് |
| നാവിഗേഷൻ സിസ്റ്റം | PreciSense LiDAR |
| ബാറ്ററി തരം | ലിഥിയം അയോൺ |
| കണക്റ്റിവിറ്റി | 2.4 GHz വൈഫൈ മാത്രം |

The Q5 Max+ offers extended runtime and large dustbin capacity.

Powerful 5500 Pa suction ensures thorough dirt removal.
വാറൻ്റിയും പിന്തുണയും
For detailed warranty information and customer support, please refer to the official user manual PDF provided with your product or visit the roborock Store. You can also download the User Manual (PDF) directly from ഇവിടെ.





