ട്രെൻഡ് 700 എംഎം വർക്ക്ടോപ്പ് റൂട്ടർ ജിഗ് യൂസർ മാനുവൽ

1. ആമുഖം

The Trend KWJ700/A 700mm Worktop Router Jig is a precision tool designed to create seamless 35mm inset mason mitre joints on kitchen worktops. This jig is engineered for versatility, accommodating various materials such as laminated chipboard, wood, and compact laminate, enhancing project flexibility.

It is specifically designed for use with routers equipped with a 12.7mm cutter and a 30mm guide bush, ensuring accurate and clean cuts. The jig supports a wide range of common worktop widths, including 700mm, 650mm, 645mm, 635mm, 620mm, 616mm, 610mm, and 600mm. This manual provides comprehensive instructions for easy setup and precise operation, guaranteeing professional results.

2 പ്രധാന സവിശേഷതകൾ

• Precision Joint Creation: Enables the creation of 35mm inset mason mitre joints for a seamless finish on kitchen worktops.
• ബഹുമുഖ മെറ്റീരിയൽ അനുയോജ്യത: Ideal for laminated chipboard, wood, and compact laminate.
• Router Specific Design: Engineered for use with routers fitted with a 12.7mm cutter and a 30mm guide bush.
• Wide Worktop Width Range: Suitable for common worktop widths including 700mm, 650mm, 645mm, 635mm, 620mm, 616mm, 610mm, and 600mm.
• വിശദമായ നിർദ്ദേശങ്ങൾ: Comes with extensive instructions for straightforward setup and accurate operation.

3. ഉൽപ്പന്നം കഴിഞ്ഞുview

ചിത്രം 1: മുകളിൽ നിന്ന് താഴേക്ക് view of the Trend KWJ700/A Worktop Router Jig. This image displays the overall layout of the jig, including the various routing channels and measurement indicators for different worktop widths and joint types. The Trend logo and model number KWJ700/A are clearly visible.

ചിത്രം 2: വിശദമായി view of the Trend KWJ700/A Worktop Router Jig. This image focuses on the 45-degree angle cutting guide and the various circular and elongated routing paths, indicating where the router will follow to create the precise mitre joints. Markings for different worktop widths are also visible.

ചിത്രം 3: അടിവശം view of the Trend KWJ700/A Worktop Router Jig. This image shows the smooth, flat surface of the jig that rests on the worktop, along with the various holes and cutouts that correspond to the routing paths and clamping points on the top side. This view emphasizes the robust construction of the jig.

4. സജ്ജീകരണം

Proper setup is crucial for achieving accurate and clean cuts. Follow these steps carefully:

1. വർക്ക് ഏരിയ തയ്യാറാക്കുക: Ensure your worktop and surrounding area are clean, stable, and well-lit.
2. ഉപകരണങ്ങൾ ശേഖരിക്കുക: You will need a router, a 12.7mm (1/2 inch) router cutter, a 30mm guide bush, and appropriate clamps to secure the jig.
3. Select Worktop Width: Identify the correct routing channels on the jig corresponding to your worktop's width (e.g., 700mm, 650mm, 600mm).
4. Position the Jig: Place the jig accurately on the worktop, aligning it with the edge and the desired joint line. Ensure the jig is oriented correctly for the type of joint (left-hand or right-hand).
5. Secure the Jig: Use suitable clamps to firmly secure the jig to the worktop. Ensure there is no movement or slippage during routing.
6. Install Router Cutter and Guide Bush: Attach the 12.7mm router cutter and the 30mm guide bush to your router according to your router's instructions.
7. Set Router Depth: Adjust the router's cutting depth to match the thickness of your worktop, ensuring the cutter will pass completely through the material without damaging the surface beneath.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Once the jig is securely set up, proceed with routing as follows:

1. Initial Pass: With the router switched off, place the router base onto the jig, ensuring the guide bush is correctly seated within the chosen routing channel.
2. റൂട്ടിംഗ് ആരംഭിക്കുക: Switch on the router and slowly guide it along the selected channel. Maintain constant pressure against the guide bush to ensure the cutter follows the jig's path precisely.
3. Multiple Passes (if necessary): For thicker materials, it may be beneficial to make multiple shallow passes rather than one deep cut to reduce strain on the router and cutter, and to achieve a cleaner finish.
4. കട്ട് പൂർത്തിയാക്കുക: Continue routing until the entire joint profile is cut. Ensure all waste material is removed.
5. Switch Off and Remove: Once the cut is complete, switch off the router and wait for the cutter to stop rotating before lifting it from the jig.
6. അങ്കിൾamp and Inspect: ശ്രദ്ധയോടെ അങ്കിൾamp the jig and remove it from the worktop. Inspect the cut for accuracy and cleanliness.
7. Create Bolt Recesses: The jig also includes guides for routing recesses for worktop connector bolts. Follow the markings on the jig to create these recesses for a strong and secure joint.

സുരക്ഷാ കുറിപ്പ്: Always wear appropriate personal protective equipment (PPE) including eye protection, hearing protection, and dust mask when operating a router. Ensure the work area is clear of obstructions and bystanders.

6. പരിപാലനം

To ensure the longevity and continued accuracy of your Trend Worktop Router Jig, follow these maintenance guidelines:

• വൃത്തിയാക്കൽ: After each use, wipe down the jig with a clean, dry cloth to remove any dust, wood chips, or residue. Avoid using harsh chemicals that could damage the jig's surface or markings.
• സംഭരണം: Store the jig in a dry, clean environment, away from direct sunlight and extreme temperatures. Store it flat or hang it to prevent warping.
• പരിശോധന: Periodically inspect the jig for any signs of wear, damage, or deformation. Ensure all markings are clear and legible.
• Router Bit Maintenance: Always use sharp router bits. Dull bits can lead to poor cut quality and increased strain on your router and the jig.

7. പ്രശ്‌നപരിഹാരം

8 സ്പെസിഫിക്കേഷനുകൾ

• മോഡൽ നമ്പർ: KWJ700/A
• നിർമ്മാതാവ്: ട്രെൻഡ്
• ഉൽപ്പന്ന അളവുകൾ: 10.16 x 101 x 0.1 സെ.മീ (4 x 39.8 x 0.04 ഇഞ്ച്)
• ഉൽപ്പന്ന ഭാരം: 5.8 കി.ഗ്രാം (12.8 പൗണ്ട്)
• Compatible Router Cutter: 12.7 മിമി (1/2 ഇഞ്ച്)
• Compatible Guide Bush: 30 മി.മീ
• Supported Worktop Widths: 700mm, 650mm, 645mm, 635mm, 620mm, 616mm, 610mm, 600mm
• Joint Type: 35mm Inset Mason Mitre
• മാതൃരാജ്യം: യുണൈറ്റഡ് കിംഗ്ഡം

9. വാറൻ്റിയും പിന്തുണയും

This product is manufactured by Trend. For specific warranty information, please refer to the documentation included with your purchase or visit the official Trend website. For technical support or inquiries regarding the KWJ700/A Worktop Router Jig, please contact Trend customer service directly.

ഏതെങ്കിലും വാറന്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങിയതിന്റെ തെളിവ് സൂക്ഷിക്കുക.