RunCam FPV Goggles and Spotter V2 ക്യാമറ സിസ്റ്റം യൂസർ മാനുവൽ

1. ആമുഖം

This manual provides comprehensive instructions for the setup, operation, and maintenance of your RunCam FPV Goggles and the Spotter V2 FPV Camera and Transmitter system. Please read this manual thoroughly before using the product to ensure proper function and safety.

Image 1.1: The RunCam FPV Goggles and the Spotter V2 FPV Camera and Transmitter, showing the complete system.

2 സുരക്ഷാ വിവരങ്ങൾ

Adhere to the following safety guidelines to prevent damage to the product or injury to yourself and others:

• Do not operate FPV equipment in areas where it may interfere with other electronic devices or communications.
• Ensure proper ventilation for the camera and transmitter to prevent overheating. The camera's heat sink can become very hot during operation.
• Always operate FPV systems responsibly and in accordance with local laws and regulations.
• ഉൽപ്പന്നം ജലത്തിൽ നിന്നും ഈർപ്പത്തിൽ നിന്നും അകറ്റി നിർത്തുക.
• Use only specified charging cables and power adapters for the goggles.

3. പാക്കേജ് ഉള്ളടക്കം

പാക്കേജിൽ ഇനിപ്പറയുന്ന ഇനങ്ങൾ ഉൾപ്പെടുന്നു:

• RunCam FPV Goggles
• Spotter V2 FPV Camera and Transmitter
• Antennas (for goggles)
• യുഎസ്ബി ചാർജിംഗ് കേബിൾ

4. ഉൽപ്പന്നം കഴിഞ്ഞുview ഘടകങ്ങളും

4.1 RunCam FPV Goggles

The FPV Goggles feature a 3-inch high brightness LCD screen and operate on the 5.8G frequency band with 40 channels. They include a built-in 3.7V/1200mAh battery for approximately 2.5 hours of working time.

Image 4.1: Dimensions and battery capacity of the FPV Goggles.

Image 4.2: The 3-inch high brightness LCD screen of the FPV Goggles displaying an outdoor scene.

Goggle Controls and Ports:

ചിത്രം 4.3: വിശദമായത് view of the FPV Goggles' buttons and ports, including CH+, Band+, Search, Menu, USB, SMA antenna connectors, AV port, and headphone jack.

• CH+ ബട്ടൺ: Short press to cycle through channels.
• ബാൻഡ്+ ബട്ടൺ: Short press to cycle through frequency bands.
• തിരയൽ ബട്ടൺ: Short press to initiate automatic channel search.
• മെനു ബട്ടൺ: ഓൺ-സ്ക്രീൻ മെനു ആക്സസ് ചെയ്ത് നാവിഗേറ്റ് ചെയ്യുക.
• പവർ ബട്ടൺ: Long press to power on/off. Short press to check battery status.
• USB പോർട്ട്: ആന്തരിക ബാറ്ററി ചാർജ് ചെയ്യുന്നതിന്.
• SMA കണക്ടറുകൾ: ബാഹ്യ ആന്റിനകൾ ഘടിപ്പിക്കുന്നതിന്.
• എവി പോർട്ട്: Audio/Video input/output.
• ഹെഡ്‌ഫോൺ ജാക്ക്: ഓഡിയോ ഔട്ട്പുട്ടിനായി.

4.2 Spotter V2 FPV Camera and Transmitter

The Spotter V2 is a micro FPV All-In-One (AIO) camera and transmitter unit. It features a 700TVL camera with a 170-degree field of view (FOV), an integrated microphone, and an On-Screen Display (OSD). The 5.8G transmitter offers adjustable power output from 20mW to 200mW across 40 channels.

Image 4.4: The compact size and lightweight design of the Spotter V2 FPV Camera.

Image 4.5: Illustration of the 170-degree wide-angle lens of the Spotter V2 FPV Camera.

5. സജ്ജീകരണ നിർദ്ദേശങ്ങൾ

5.1 Charging the FPV Goggles

1. Connect the provided USB charging cable to the USB port on the FPV Goggles.
2. USB കേബിളിന്റെ മറ്റേ അറ്റം ഒരു സ്റ്റാൻഡേർഡ് USB പവർ അഡാപ്റ്ററുമായി (ഉൾപ്പെടുത്തിയിട്ടില്ല) അല്ലെങ്കിൽ ഒരു കമ്പ്യൂട്ടറിന്റെ USB പോർട്ടുമായി ബന്ധിപ്പിക്കുക.
3. The charging indicator light will show the charging status. Refer to the LED indicator section for details (if available in product documentation).
4. A full charge typically takes approximately 2.5 hours and provides about 2.5 hours of operation.

5.2 Attaching Goggle Antennas

1. Carefully screw the two provided antennas onto the SMA connectors located on the top of the FPV Goggles.
2. Ensure they are finger-tight to establish a secure connection. Do not overtighten.

5.3 Connecting the Spotter V2 Camera and Transmitter

The Spotter V2 camera unit requires power from your FPV drone, RC car, or other hobby device. Consult your device's manual for appropriate power connections. The camera typically connects to a 5V power source.

Image 5.1: The Spotter V2 FPV Camera transmitting a live feed, demonstrating its powerful receiver and high-quality image capabilities.

6. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

6.1 പവർ ഓൺ/ഓഫ്

• To Power On Goggles: Long press the Power button until the screen illuminates.
• To Power Off Goggles: Long press the Power button until the screen turns off.
• Spotter V2 Camera: The camera powers on automatically when connected to a power source.

6.2 Channel and Band Selection (Goggles)

സ്വമേധയാലുള്ള തിരഞ്ഞെടുപ്പ്:

1. ഷോർട്ട് അമർത്തുക ബാൻഡ്+ button to cycle through the available frequency bands (A, B, E, F, RaceBand).
2. ഷോർട്ട് അമർത്തുക CH+ തിരഞ്ഞെടുത്ത ബാൻഡിനുള്ളിലെ ചാനലുകളിലൂടെ സൈക്കിൾ ചെയ്യാൻ ബട്ടൺ.
3. Observe the OSD on the goggles screen to confirm the selected band and channel.

യാന്ത്രിക ചാനൽ തിരയൽ:

The goggles support a one-key automatic channel search function to quickly find the strongest signal.

1. Ensure your Spotter V2 camera is powered on and transmitting.
2. ഷോർട്ട് അമർത്തുക തിരയൽ button on the FPV Goggles.
3. The goggles will scan all 40 channels across all bands and automatically lock onto the channel with the strongest signal.

6.3 Transmitter Power Adjustment (Spotter V2)

The Spotter V2 transmitter allows adjustment between 20mW and 200mW output power. Refer to the camera's specific instructions or OSD menu for details on how to change the power setting. Higher power provides greater range but consumes more energy and generates more heat.

6.4 On-Screen Display (OSD) and Integrated Microphone

The Spotter V2 camera features an OSD that provides real-time flight data (if connected to a flight controller with OSD capabilities) and an integrated microphone for audio capture. The OSD information will be visible on the FPV Goggles screen.

7. പരിപാലനം

7.1 വൃത്തിയാക്കൽ

• Use a soft, dry cloth to clean the exterior of the goggles and camera.
• For the goggle screen and camera lens, use a specialized lens cleaning cloth and solution to avoid scratches.
• കഠിനമായ രാസവസ്തുക്കളോ ഉരച്ചിലുകളോ ഉപയോഗിക്കരുത്.

7.2 Battery Care (Goggles)

• Recharge the goggles battery regularly, even if not in use, to maintain battery health.
• ബാറ്ററി പൂർണ്ണമായി ഡിസ്ചാർജ് ചെയ്യുന്നത് ഒഴിവാക്കുക.
• Store the goggles in a cool, dry place when not in use.

8. പ്രശ്‌നപരിഹാരം

8.1 വീഡിയോ സിഗ്നൽ ഇല്ല

• Ensure both the FPV Goggles and the Spotter V2 camera are powered on.
• Verify that the goggles and camera are set to the same frequency band and channel. Use the auto-search function on the goggles.
• Check antenna connections on the goggles.
• Ensure the Spotter V2 camera is receiving adequate power.
• Confirm there are no obstructions between the camera and goggles.

8.2 Poor Video Quality / Static

• Adjust the channel and band on the goggles to find a clearer signal.
• Ensure antennas are properly oriented for optimal reception.
• Check for sources of interference in the operating environment.
• Increase the transmitter power of the Spotter V2 if possible (check local regulations).

8.3 Camera Overheating

• The Spotter V2 camera's heat sink can become hot during operation. This is normal.
• Ensure adequate airflow around the camera, especially if mounted in an enclosed space.
• If overheating persists and causes performance issues, consider reducing transmitter power if applicable.

9 സ്പെസിഫിക്കേഷനുകൾ

10. വാറൻ്റിയും പിന്തുണയും

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official RunCam website. Online resources and FAQs may also be available on the manufacturer's support pages.