XiNOWY V4 Pro XiNOWY 3.5

XiNOWY V4 Pro Motorcycle Helmet Intercom User Manual

Model: V4 Pro XiNOWY 3.5

ആമുഖം

The XiNOWY V4 Pro Motorcycle Helmet Intercom is an advanced Bluetooth communication system designed for motorcyclists, outdoor enthusiasts, and those requiring clear, hands-free communication in challenging environments. This device supports simultaneous communication for up to 4 individuals over a range of 1500 meters in open areas, enhancing safety and connectivity during rides, skiing, or mountain climbing. It integrates Bluetooth 5.1 technology, FM radio, CVC noise reduction, and is built with IP65 waterproofing for reliable performance in various conditions.

Two XiNOWY V4 Pro intercom units shown from an angled perspective.

Figure 1: XiNOWY V4 Pro Intercom Units.

പാക്കേജ് ഉള്ളടക്കം

Before proceeding with installation, please verify that all components are present in your package:

Contents of the XiNOWY V4 Pro package including two intercom units, two sets of earphones, charging cables, and mounting accessories laid out.

Figure 2: All components included in the XiNOWY V4 Pro package.

ഉൽപ്പന്ന സവിശേഷതകൾ

A motorcyclist on a road with icons representing Noise reduction, 4 people talking, Bluetooth 5.1, 850mAh battery, and IP65 waterproof features.

Figure 3: Key features of the XiNOWY V4 Pro Intercom.

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Follow these steps to properly install the XiNOWY V4 Pro intercom on your helmet:

  1. മൗണ്ടിംഗ് ലൊക്കേഷൻ തിരഞ്ഞെടുക്കുക: Select a suitable flat surface on the side of your helmet, typically on the left side, where the intercom unit can be securely attached without obstructing vision or movement.
  2. Attach Headset Clamp: Use the provided headset clamp to secure the intercom unit to the helmet. Ensure it is firmly attached. Some clamps may use adhesive pads, while others may clip onto the helmet edge.
  3. Install Earphones: Open the helmet's inner lining. Place the earphones inside the helmet, aligning them with your ears. Ensure they are positioned comfortably and securely. Use the adhesive pads if necessary to keep them in place.
  4. Route Microphone: Route the microphone arm towards your mouth. Ensure it is close enough for clear voice pickup but does not interfere with your helmet's visor or comfort.
  5. കേബിളുകൾ ബന്ധിപ്പിക്കുക: Connect the earphone and microphone cables to the appropriate ports on the intercom unit. Tuck away any excess cable neatly within the helmet lining to prevent snagging.
  6. പവർ ഓൺ: Press and hold the power button (usually marked "OFF") for a few seconds until the indicator light illuminates, indicating the device is powered on.
Diagram showing various helmet types compatible with the XiNOWY V4 Pro intercom, including full-face, open-face, and modular helmets.

Figure 4: The XiNOWY V4 Pro is compatible with most helmet types.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

അടിസ്ഥാന പ്രവർത്തനങ്ങൾ

ബ്ലൂടൂത്ത് ജോടിയാക്കൽ

To pair your XiNOWY V4 Pro with a mobile phone, GPS, or other Bluetooth devices:

  1. Ensure the intercom is powered off.
  2. Press and hold the "OFF" button for approximately 5-7 seconds until the LED indicator flashes red and blue alternately, indicating pairing mode.
  3. On your mobile phone or device, enable Bluetooth and search for "XiNOWY V4 Pro" (or similar name).
  4. Select the device to connect. Once paired, the LED indicator will flash blue slowly.
Diagram illustrating Bluetooth connection between the XiNOWY V4 Pro intercom, a mobile phone, and a GPS device.

Figure 5: Bluetooth connectivity with various devices.

Intercom Communication (4 Riders)

The V4 Pro supports communication among up to 4 riders. Follow the manual's specific instructions for multi-unit pairing, typically involving sequential pairing of units A to B, B to C, and C to D.

Four motorcyclists riding in a line, with lines indicating 500m communication range between each, demonstrating 4-person intercom capability.

Figure 6: Four riders communicating simultaneously.

എഫ്എം റേഡിയോ ഓപ്പറേഷൻ

ചാർജിംഗും ബാറ്ററി ലൈഫും

The XiNOWY V4 Pro is equipped with an 850mAh lithium-ion battery. To charge the device, connect the provided USB charging cable to the charging port on the intercom unit and a suitable USB power source (e.g., computer USB port, wall adapter). The LED indicator will typically show red during charging and turn off or change color when fully charged.

The device can be used while charging, providing continuous operation for longer trips.

XiNOWY V4 Pro intercom unit with icons indicating 2.5 hours charging time, 12 hours working time, and 4.5 hours music play time, highlighting its 850mAh battery.

Figure 7: Battery specifications and endurance.

പരിപാലനവും പരിചരണവും

XiNOWY V4 Pro intercom unit being splashed with water, demonstrating its IP65 waterproof rating.

Figure 8: The intercom unit is IP65 waterproof.

ട്രബിൾഷൂട്ടിംഗ്

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
ഉപകരണം പവർ ഓണാക്കുന്നില്ല.കുറഞ്ഞ ബാറ്ററി.ഉപകരണം പൂർണ്ണമായും ചാർജ് ചെയ്യുക.
ഫോണുമായി ജോടിയാക്കാൻ കഴിയില്ല.Intercom not in pairing mode; Bluetooth off on phone.Ensure intercom is in pairing mode (flashing red/blue). Enable Bluetooth on phone and search again.
Poor audio quality / Noise.Microphone not positioned correctly; high wind noise; CVC not active.Adjust microphone closer to mouth. Ensure helmet is properly sealed. CVC noise reduction is automatic.
Intercom range is shorter than expected.Obstructions (buildings, trees); too many connected devices; environmental interference.Operate in open areas. Reduce number of active connections if possible.

സ്പെസിഫിക്കേഷനുകൾ

ഫീച്ചർവിശദാംശങ്ങൾ
മോഡലിൻ്റെ പേര്V4 Pro XiNOWY 3.5
ബ്ലൂടൂത്ത് പതിപ്പ്5.1
ഇന്റർകോം റേഞ്ച്1500 മീറ്റർ വരെ (തുറന്ന പ്രദേശം)
Simultaneous Riders4
ബാറ്ററി ശേഷി850mAh ലിഥിയം അയോൺ
ജോലി സമയം12 മണിക്കൂർ വരെ
സ്റ്റാൻഡ്ബൈ സമയം450 മണിക്കൂർ വരെ
ചാർജിംഗ് സമയംഏകദേശം 2.5 മണിക്കൂർ
വാട്ടർപ്രൂഫ് റേറ്റിംഗ്IP65
ശബ്ദ നിയന്ത്രണംആക്ടീവ് നോയ്‌സ് റദ്ദാക്കൽ (CVC)
ഉൾപ്പെടുത്തിയ ഘടകങ്ങൾ2 Intercoms, 2 Earphones, 2 USB Cables, 2 Headset Clamps, 1 Installation Tool
പാക്കേജ് അളവുകൾ20 x 8 x 6 സെ.മീ
ഭാരം1 kg (package)

വാറൻ്റിയും പിന്തുണയും

The XiNOWY V4 Pro comes with a 30-day full refund policy. For any questions or concerns regarding your product, please contact XiNOWY customer support. They aim to provide a satisfactory answer within 24 hours.

For further assistance, please refer to the contact information provided with your purchase or visit the official XiNOWY webസൈറ്റ്.

അനുബന്ധ രേഖകൾ - V4 Pro XiNOWY 3.5

പ്രീview XINOWY Y70 മോട്ടോർസൈക്കിൾ ബ്ലൂടൂത്ത് ഹെൽമെറ്റ് ഹെഡ്‌സെറ്റ് ദ്രുത നിർദ്ദേശങ്ങൾ
XINOWY Y70 മോട്ടോർസൈക്കിൾ ബ്ലൂടൂത്ത് ഹെൽമെറ്റ് ഹെഡ്‌സെറ്റിനായുള്ള ക്വിക്ക് ഇൻസ്ട്രക്ഷൻ മാനുവൽ, ജോടിയാക്കൽ, മ്യൂസിക് പ്ലേബാക്ക്, ഫോൺ കോൾ മാനേജ്‌മെന്റ്, ചാർജിംഗ്, സുരക്ഷാ മാർഗ്ഗനിർദ്ദേശങ്ങൾ എന്നിവ ഉൾക്കൊള്ളുന്നു.
പ്രീview Q68-Max Motorcycle Helmet Bluetooth Headset Quick Start Guide
Concise quick start guide for the XINOWY Q68-Max motorcycle helmet Bluetooth headset, covering functions like intercom, music sharing, FM radio, and call handling.
പ്രീview XINOWY V4 ബ്ലൂടൂത്ത് ഇന്റർകോം ഹെഡ്‌സെറ്റ് ഉപയോക്തൃ മാനുവൽ & ഇൻസ്റ്റലേഷൻ ഗൈഡ്
XINOWY V4 ബ്ലൂടൂത്ത് ഇന്റർകോം ഹെഡ്‌സെറ്റിലേക്കുള്ള സമഗ്രമായ ഗൈഡ്, ഇൻസ്റ്റാളേഷൻ, ഫോണുകളുമായും മറ്റ് യൂണിറ്റുകളുമായും ജോടിയാക്കൽ, FM റേഡിയോ പ്രവർത്തനങ്ങൾ, സവിശേഷതകൾ, സുരക്ഷാ മുൻകരുതലുകൾ എന്നിവ ഇതിൽ ഉൾപ്പെടുന്നു.
പ്രീview XINOWY S8 ഹെൽമെറ്റ് ബ്ലൂടൂത്ത് ഇയർഫോൺ: ഇൻസ്റ്റാളേഷനും പ്രവർത്തന ഗൈഡും
XINOWY S8 ഹെൽമെറ്റ് ബ്ലൂടൂത്ത് ഇയർഫോണിനായുള്ള സമഗ്ര ഗൈഡ്, ഇൻസ്റ്റാളേഷൻ, പ്രവർത്തനം, സവിശേഷതകൾ, സ്പെസിഫിക്കേഷനുകൾ, മോട്ടോർ സൈക്കിൾ റൈഡർമാർക്കുള്ള FCC പാലിക്കൽ എന്നിവ ഉൾക്കൊള്ളുന്നു.
പ്രീview TNICER G1EX ഹെൽമെറ്റ് ബ്ലൂടൂത്ത് ഇന്റർകോം ഇൻസ്ട്രക്ഷൻ മാനുവൽ
Comprehensive instruction manual for the TNICER G1EX Helmet Bluetooth Intercom system, detailing product features, installation methods, Bluetooth operations, phone call handling, music functions, intercom pairing, music sharing, charging precautions, and FCC compliance.
പ്രീview WAYXIN R15 പ്രോ മോട്ടോർസൈക്കിൾ ഹെഡ്‌സെറ്റ് ഉപയോക്തൃ മാനുവൽ
WAYXIN R15 Pro മോട്ടോർസൈക്കിൾ ഹെഡ്‌സെറ്റിനായുള്ള സമഗ്രമായ ഉപയോക്തൃ മാനുവൽ, സവിശേഷതകൾ, ഇൻസ്റ്റാളേഷൻ, ബട്ടൺ ഫംഗ്‌ഷനുകൾ, ഫോൺ പെയറിംഗ്, മ്യൂസിക് ഷെയറിംഗ്, എഫ്എം റേഡിയോ, ട്രബിൾഷൂട്ടിംഗ് എന്നിവ വിശദമായി പ്രതിപാദിക്കുന്നു.