CYCPLUS L7

CYCPLUS L7 Bike Radar Tail Light User Manual

Model: L7 | Brand: CYCPLUS

1. ആമുഖം

The CYCPLUS L7 Bike Radar Tail Light is an advanced safety device designed to enhance cycling visibility and awareness. It features precise radar sensing to detect approaching vehicles, intelligent brake sensing, and multiple light modes. With a long-lasting rechargeable battery and IPX6 waterproof rating, it is suitable for various cycling conditions and scenarios, ensuring a safer riding experience.

2. പാക്കേജ് ഉള്ളടക്കം

ഇൻസ്റ്റാളുചെയ്യുന്നതിനുമുമ്പ്, എല്ലാ ഘടകങ്ങളും ലഭ്യമാണെന്ന് ഉറപ്പാക്കുക:

Image showing all included components of the CYCPLUS L7 Radar Tail Light package.

Figure 2.1: All components included in the CYCPLUS L7 Radar Tail Light package.

3. ഇൻസ്റ്റലേഷൻ

The CYCPLUS L7 offers two primary installation methods: mounting to the seat rail or to the seat post. Ensure the tail light is mounted vertically to the ground for optimal radar performance.

3.1. Mounting to the Seat Rail

  1. Match the slope of the seat rail mounting bracket base plate to the slope of your bicycle's seat rail.
  2. Raise one end of the seat rail mounting bracket panel and attach it to the seat rail.
  3. Interchange the left and right screws, then insert them into the slots. For carbon fiber seat rails, tighten to approximately 4N-m. Over-tightening may damage the seat rail.
  4. Adjust the angle of the mount and tighten the screws securely.
  5. Install the tail light main unit onto the mount. It is recommended to install the lanyard to prevent the tail light from being lost.
  6. Ensure the base of the tail light remains perpendicular to the ground (90-degree angle) to avoid the radar detecting objects too close or inaccurately.
Image showing the seat rail mounting bracket and how to attach it to the bicycle seat rails.

Figure 3.1: Attaching the seat rail mount.

Image showing the installation of the tail light onto the seat rail mount.

Figure 3.2: Installing the tail light main unit onto the seat rail mount.

3.2. Mounting to the Seat Post

  1. Select the appropriate rubber pad (Pad 1 or Pad 2) based on the shape of your bicycle's seat post (e.g., round, aero).
  2. Attach the selected rubber pad to the seat post mount.
  3. Secure the rubber strap tightly on one side of the mount and then wrap it around the seat post, securing the other end.
  4. Install the tail light main unit onto the mount. It is recommended to install the lanyard to prevent the tail light from being lost.
  5. Ensure the base of the tail light remains perpendicular to the ground (90-degree angle) to avoid the radar detecting objects too close or inaccurately.
Image showing selection of seat post rubber pads based on seat post shape.

Figure 3.3: Choosing the correct seat post pad.

Image showing how to attach the seat post mount with the rubber strap.

Figure 3.4: Securing the seat post mount.

Image showing the installation of the tail light onto the seat post mount.

Figure 3.5: Installing the tail light main unit onto the seat post mount.

4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

4.1. Power On/Off and Mode Switching

To power on the device, long press the button located on the tail light. To switch between light modes, short press the button. The available modes include:

The device will automatically enter sleep mode after 3 minutes of inactivity and wake up upon movement, conserving battery life.

Main product image of the CYCPLUS L7 Radar Tail Light.

Figure 4.1: CYCPLUS L7 Tail Light overview with indicator and button.

Image illustrating different light modes: Constant, Blinking, Breathing, and Radar Only.

Figure 4.2: Various light modes available on the L7.

4.2. Connecting to Bike Computer / App

The CYCPLUS L7 supports ANT+ and Bluetooth 5.0 protocols, allowing connection to compatible smartphones, bike computers, and smartwatches that support tail light functions.

Image showing the CYCPLUS L7 connected to a bike computer and a smartwatch, demonstrating wide compatibility.

Figure 4.3: Wide compatibility with various devices.

Video 4.1: This video demonstrates the unboxing, installation process for both seat rail and seat post mounts, how to switch between light modes, and how to connect the L7 to a bike computer and the CYCPLUS mobile application for advanced settings. It provides a comprehensive visual guide for initial setup and operation.

5 പ്രധാന സവിശേഷതകൾ

Main product image of the CYCPLUS L7 Radar Tail Light.

Figure 5.1: The CYCPLUS L7 Radar Tail Light.

Image illustrating the 270-degree visibility and 40-degree radar detection angle of the tail light.

Figure 5.2: Visibility and detection range of the L7.

Image showing the automatic sleep and wake-up function of the tail light when mounted on a bike.

Figure 5.3: Automatic sleep and wake-up feature.

6. പരിപാലനം

7. പ്രശ്‌നപരിഹാരം

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
ഉപകരണം പവർ ഓണാക്കുന്നില്ല.ബാറ്ററി കുറവാണ്; ഉപകരണത്തിന്റെ തകരാറ്.ഉപകരണം പൂർണ്ണമായും ചാർജ് ചെയ്യുക. ഇപ്പോഴും പ്രതികരിക്കുന്നില്ലെങ്കിൽ, പിന്തുണയെ ബന്ധപ്പെടുക.
Radar not detecting vehicles or inaccurate readings.Incorrect mounting angle; obstruction; environmental factors (heavy rain, fog).Ensure the tail light is mounted vertically (90 degrees to the ground). Check for obstructions. Radar performance may be affected by extreme weather.
Cannot connect to bike computer or app.Bluetooth/ANT+ off; device not in pairing mode; interference.Ensure Bluetooth/ANT+ is enabled on your device. Restart the tail light and try pairing again. Move closer to the tail light. Check for firmware updates for your bike computer/app.
Light modes not switching.Button malfunction; software glitch.Try long pressing to power off and then on again. If the issue persists, contact support.
Battery life shorter than expected.Frequent use of high-brightness modes; aging battery.Adjust brightness settings via the app. Ensure full charge cycles. Battery capacity naturally degrades over time.

8 സ്പെസിഫിക്കേഷനുകൾ

ഫീച്ചർവിശദാംശങ്ങൾ
ഉൽപ്പന്നത്തിൻ്റെ പേര്Radar Tail Light L7
ഉൽപ്പന്ന വലുപ്പം76.5 x 37 x 25 മിമി
ഉൽപ്പന്ന ഭാരം67 ഗ്രാം
കണ്ടെത്തൽ ദൂരംUp to 160 meters (175 yards)
കണ്ടെത്തൽ ആംഗിൾതിരശ്ചീനമായ ±20°, ലംബമായ ±5°
Detectable Relative Velocityമണിക്കൂറിൽ 3-160 കി.മീ
വയർലെസ് പ്രോട്ടോക്കോൾANT+ / BLE 5.0
വാട്ടർപ്രൂഫ് റേറ്റിംഗ്IPX6
ബാറ്ററി2000mAh 3.7V 7.4Wh Lithium Battery
ചാർജിംഗ് പോർട്ട്ടൈപ്പ്-സി 5 വി 1 എ
പ്രവർത്തന താപനില0-50 ഡിഗ്രി സെൽഷ്യസ്
സംഭരണ ​​താപനില-10-75 ഡിഗ്രി സെൽഷ്യസ്
ബാറ്ററി ലൈഫ് (പരമാവധി)36 മണിക്കൂർ വരെ
Diagram showing the specifications of the CYCPLUS L7 Radar Tail Light including dimensions, weight, detection range, and battery details.

Figure 8.1: Detailed specifications of the L7 Radar Tail Light.

9. വാറൻ്റിയും പിന്തുണയും

The CYCPLUS L7 Radar Tail Light comes with a 1 വർഷത്തെ പരിമിത വാറൻ്റി വാങ്ങിയ തീയതി മുതൽ. ഈ വാറന്റി സാധാരണ ഉപയോഗത്തിൽ നിർമ്മാണ വൈകല്യങ്ങളും മെറ്റീരിയൽ വൈകല്യങ്ങളും ഉൾക്കൊള്ളുന്നു.

For technical support, warranty claims, or any inquiries regarding your product, please contact CYCPLUS customer service through the official website or the contact information provided in your product packaging. Please have your purchase receipt and product model number (L7) ready when contacting support.

അനുബന്ധ രേഖകൾ - L7

പ്രീview സൈക്പ്ലസ് എം1 ജിപിഎസ് ബൈക്ക് കമ്പ്യൂട്ടർ യൂസർ മാനുവലും സജ്ജീകരണ ഗൈഡും
Cycplus M1 GPS ബൈക്ക് കമ്പ്യൂട്ടർ ഉപയോക്തൃ മാനുവൽ പര്യവേക്ഷണം ചെയ്യുക. അതിന്റെ സവിശേഷതകൾ, ഇൻസ്റ്റാളേഷൻ, ക്വിക്ക് സ്റ്റാർട്ട്, ബട്ടൺ ഫംഗ്‌ഷനുകൾ, ക്രമീകരണങ്ങൾ, XOSS, Strava, TrainingPeaks എന്നിവയുമായുള്ള ആപ്പ് കണക്റ്റിവിറ്റി, ഒപ്റ്റിമൽ സൈക്ലിംഗ് പ്രകടനത്തിനായുള്ള വിശദമായ സ്പെസിഫിക്കേഷനുകൾ എന്നിവയെക്കുറിച്ച് അറിയുക.
പ്രീview CYCPLUS റഡാർ ടെയിൽ ലൈറ്റ് L7 ഉപയോക്തൃ മാനുവൽ
CYCPLUS റഡാർ ടെയിൽ ലൈറ്റ് L7-നുള്ള ഔദ്യോഗിക ഉപയോക്തൃ മാനുവൽ. സൈക്ലിസ്റ്റുകൾക്കുള്ള ഇൻസ്റ്റാളേഷൻ, പ്രവർത്തനം, സുരക്ഷാ സവിശേഷതകൾ, ആപ്പ് കണക്റ്റിവിറ്റി എന്നിവയെക്കുറിച്ച് അറിയുക.
പ്രീview CYCPLUS M2 GPS ബൈക്ക് കമ്പ്യൂട്ടർ യൂസർ മാനുവൽ
CYCPLUS M2 GPS ബൈക്ക് കമ്പ്യൂട്ടറിനായുള്ള സമഗ്രമായ ഉപയോക്തൃ മാനുവൽ, സജ്ജീകരണം, പ്രവർത്തനം, ക്രമീകരണങ്ങൾ, സെൻസർ കണക്ഷൻ, ട്രബിൾഷൂട്ടിംഗ് എന്നിവ ഉൾക്കൊള്ളുന്നു. ഈ ഉപകരണം ഉപയോഗിച്ച് നിങ്ങളുടെ സൈക്ലിംഗ് അനുഭവം എങ്ങനെ പരമാവധിയാക്കാമെന്ന് മനസിലാക്കുക.
പ്രീview CYCPLUS M2 GPS ബൈക്ക് കമ്പ്യൂട്ടർ യൂസർ മാനുവൽ
സൈക്ലിസ്റ്റുകൾക്കുള്ള സവിശേഷതകൾ, സജ്ജീകരണം, പ്രവർത്തനം, സ്പെസിഫിക്കേഷനുകൾ എന്നിവ വിശദീകരിക്കുന്ന CYCPLUS M2 GPS ബൈക്ക് കമ്പ്യൂട്ടറിനായുള്ള സമഗ്രമായ ഉപയോക്തൃ മാനുവൽ.
പ്രീview CYCPLUS M2 GPS ബൈക്ക് കമ്പ്യൂട്ടർ യൂസർ മാനുവൽ
This user manual provides comprehensive instructions for the CYCPLUS M2 GPS Bike Computer, covering setup, operation, features, settings, and app connectivity for cyclists.
പ്രീview CYCPLUS M3 GPS ബൈക്ക് കമ്പ്യൂട്ടർ യൂസർ മാനുവൽ
CYCPLUS M3 GPS ബൈക്ക് കമ്പ്യൂട്ടറിനെക്കുറിച്ചുള്ള വിശദമായ വിവരങ്ങൾ ഈ ഉപയോക്തൃ മാനുവലിൽ ലഭ്യമാണ്. ക്വിക്ക് സ്റ്റാർട്ട് സെറ്റപ്പ്, ബട്ടൺ ഫംഗ്‌ഷനുകൾ, ഡാറ്റ ഡിസ്‌പ്ലേ ഓപ്ഷനുകൾ, ഉപകരണ ക്രമീകരണങ്ങൾ, ANT+ സെൻസർ കണക്ഷൻ, APP ഇന്റഗ്രേഷൻ, ഇൻസ്റ്റാളേഷൻ, സ്പെസിഫിക്കേഷനുകൾ എന്നിവയെക്കുറിച്ച് അറിയുക. പെർഫോമൻസ് ട്രാക്കിംഗും നാവിഗേഷനും ആഗ്രഹിക്കുന്ന സൈക്ലിസ്റ്റുകൾക്ക് അനുയോജ്യം.