Calex Spot On Wireless Wall Lamp ഉപയോക്തൃ മാനുവൽ

1. ആമുഖം

The Calex Spot On series offers powerful, wireless lighting for various surfaces. This compact lamp is designed for ease of use and efficient illumination in areas without direct power access. Its slim profile and integrated sensors make it a versatile lighting solution for your home.

Image: A single Calex Spot On wireless wall lamp, highlighting its compact and sleek design with the motion sensor visible in the center.

2 പ്രധാന സവിശേഷതകൾ

• വയർലെസ് സൗകര്യം: Operates on 3x AAA batteries, eliminating the need for power outlets. Ideal for locations without mains power.
• സ്ലിം ഡിസൈൻ: Only 10mm thick, ensuring a discreet and stylish appearance.
• എളുപ്പമുള്ള ഇൻസ്റ്റാളേഷൻ: Simple to attach to various surfaces using the included 3M Tape and Magnet.
• Efficient Day/Night Sensor: Features a PIR sensor with a 60° range for automatic activation upon motion detection.
• ഊർജ്ജ സംരക്ഷണം: Equipped with built-in timers to conserve energy and ensure long-lasting use without waste.
• ക്രമീകരിക്കാവുന്ന വെളിച്ചം: Focuses light where it is needed.

3. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Follow these steps to set up your Calex Spot On Wireless Wall Lamp:

1. ഉള്ളടക്കം അൺപാക്ക് ചെയ്യുക: Carefully remove all items from the packaging. Ensure you have the three wall lamps, 3M adhesive tape, and magnets.
2. ബാറ്ററികൾ ചേർക്കുക: ഓരോ എൽamp requires 3x AAA batteries (not included). Locate the battery compartment on the back of the lamp, open it, and insert the batteries, observing the correct polarity (+/-). Close the compartment securely.
3. മൗണ്ടിംഗ് ലൊക്കേഷൻ തിരഞ്ഞെടുക്കുക: Select a clean, dry, and flat surface for installation. Consider areas like staircases, hallways, closets, or dark corners where additional light is needed.
4. മൗണ്ടിംഗ് ഓപ്ഷനുകൾ:
   • 3M പശ ടേപ്പ് ഉപയോഗിക്കുന്നു: Peel off the protective backing from the 3M adhesive tape and firmly press it onto the back of the lamp. Then, press the lamp firmly onto the desired surface for at least 30 seconds.
   • Using Magnets: If mounting on a metallic surface, the integrated magnet allows for direct attachment. Alternatively, use the included metal plates (if provided) with adhesive backing to create a magnetic surface on non-metallic areas, then attach the lamp.
5. ടെസ്റ്റ് പ്രവർത്തനം: Once mounted, test the motion sensor and light activation. The lamp should illuminate when motion is detected within its range in low-light conditions.

Image: Calex Spot On lamp providing illumination on a staircase. The lamp is discreetly mounted on the wall, casting warm light downwards onto the steps, enhancing visibility and safety.

ചിത്രം: ഒരു ക്ലോസ്-അപ്പ് view of the Calex Spot On lamp installed on a wall, demonstrating its light output. The warm light is directed downwards, highlighting the texture of the wall and the edge of the wooden staircase.

4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The Calex Spot On lamp is designed for automatic operation based on ambient light and motion detection.

• യാന്ത്രിക സജീവമാക്കൽ: The integrated Day/Night PIR sensor detects motion within a 60° range and up to 3.5 meters. The lamp will automatically turn on when motion is detected in low-light conditions.
• പ്രകാശ ദൈർഘ്യം: Once activated, the lamp will remain lit for approximately 20 seconds. If motion continues to be detected, the light will stay on. After 20 seconds of no motion, the lamp will turn off to conserve battery life.
• Energy Saving Timers: എൽamp is equipped with internal timers to optimize battery usage. There are no user-adjustable settings for these timers.

Image: The Calex Spot On lamp providing subtle illumination in a dark bedroom setting. The light is cast onto the floor beside a bed, demonstrating its utility as a night light or for navigating in low-light conditions.

5. പരിപാലനം

To ensure optimal performance and longevity of your Calex Spot On Wireless Wall Lamp, ഈ ലളിതമായ പരിപാലന മാർഗ്ഗനിർദ്ദേശങ്ങൾ പാലിക്കുക:

• വൃത്തിയാക്കൽ: എൽ തുടയ്ക്കുകamp gently with a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the surface or internal components.
• ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ: When the light output diminishes or the lamp stops activating, it's time to replace the batteries. Open the battery compartment, remove the old AAA batteries, and insert new ones, ensuring correct polarity. Dispose of old batteries responsibly.
• സെൻസർ ഏരിയ: Keep the motion sensor lens clean and free from dust or obstructions to ensure accurate detection.
• സംഭരണം: എൽ സൂക്ഷിക്കുകയാണെങ്കിൽamp for an extended period, remove the batteries to prevent leakage and potential damage.

6. പ്രശ്‌നപരിഹാരം

If you encounter issues with your Calex Spot On Wireless Wall Lamp, ഇനിപ്പറയുന്ന പൊതുവായ പ്രശ്നങ്ങളും പരിഹാരങ്ങളും കാണുക:

7 സ്പെസിഫിക്കേഷനുകൾ

8. വാറൻ്റിയും പിന്തുണയും

For warranty information and customer support, please refer to the official CALEX webസൈറ്റിൽ ബന്ധപ്പെടുക അല്ലെങ്കിൽ നിങ്ങളുടെ റീട്ടെയിലറെ ബന്ധപ്പെടുക. ഏതെങ്കിലും വാറന്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങിയതിന്റെ തെളിവ് സൂക്ഷിക്കുക.

കൂടുതൽ സഹായത്തിനോ സാങ്കേതിക അന്വേഷണങ്ങൾക്കോ, ദയവായി സന്ദർശിക്കുക CALEX Store on Amazon or the official CALEX webസൈറ്റ്.