Nitecore EDC25 EDC Flashlight User Manual

ആമുഖം

The Nitecore EDC25 is a high-performance Everyday Carry (EDC) flashlight designed for portability and powerful illumination. Featuring a slim, flat shape and USB-C rechargeable capabilities, it delivers up to 3000 lumens, making it suitable for various daily and tactical applications. This manual provides comprehensive instructions for its setup, operation, and maintenance.

Figure 1: Nitecore EDC25 Flashlight, showing the device, USB-C charging cable, and a Nitecore sticker.

ഫീച്ചറുകൾ

• സൂപ്പർ ബ്രൈറ്റ് ഇല്യൂമിനേഷൻ: Capable of a 3000 lumen maximum output with a beam throw of up to 328 yards (300 meters).
• അൾട്രാ സ്ലിം ഡിസൈൻ: Flat shape with a thin build of only 0.84 inches (13.7mm) and a weight of 3.67 oz (104g), designed for easy pocket carry.
• USB-C റീചാർജ് ചെയ്യാവുന്നത്: Equipped with a built-in USB-C charging port and power indicators for battery level monitoring. Fully charges in just over 1 hour, providing up to 55 hours of continuous use on the lowest setting.
• അവബോധജന്യമായ പ്രവർത്തനം: രണ്ട്-സെക്കൻഡുകൾ ഫീച്ചർ ചെയ്യുന്നുtage tactical button for precise control and a customizable tactical button for instant access to Turbo or Strobe modes.
• നീണ്ടുനിൽക്കുന്ന നിർമ്മാണം: Made from aluminum alloy with HA III military-grade hard-anodized finish, offering resistance to scratches, sweat, and fingerprints.
• ജല പ്രതിരോധം: Rated IP54 for water resistance.
• ആഘാത പ്രതിരോധം: Designed to withstand impacts from up to 1 meter.

Figure 2: The Nitecore EDC25 held in hand, demonstrating its slim and ergonomic design for everyday carry.

ബോക്സിൽ എന്താണുള്ളത്

Upon unboxing your Nitecore EDC25, please ensure all the following components are present:

• Nitecore EDC25 Flashlight
• USB-C ചാർജിംഗ് കേബിൾ
• ലാനിയാർഡ്
• Nitecore Sticker

സജ്ജമാക്കുക

ബാറ്ററി ചാർജ് ചെയ്യുന്നു

1. Locate the USB-C charging port on the side of the flashlight.
2. Open the protective cover of the USB-C port.
3. നൽകിയിരിക്കുന്ന USB-C ചാർജിംഗ് കേബിൾ ഫ്ലാഷ്‌ലൈറ്റിലേക്കും ഒരു പവർ സ്രോതസ്സിലേക്കും (ഉദാ: USB വാൾ അഡാപ്റ്റർ, കമ്പ്യൂട്ടർ USB പോർട്ട്) ബന്ധിപ്പിക്കുക.
4. The battery indicator lights (green LEDs) on the flashlight will illuminate to show the charging status. When all four green LEDs are solid, the battery is fully charged.
5. Once charging is complete, disconnect the cable and securely close the protective cover to maintain water resistance.

Figure 3: USB-C charging port with the protective cover open, ready for cable connection.

ബാറ്ററി ലെവൽ സൂചന

The EDC25 features four green LEDs to indicate the battery level:

• Four solid green LEDs: Approximately 75%-100% battery.
• Three solid green LEDs: Approximately 50%-75% battery.
• Two solid green LEDs: Approximately 25%-50% battery.
• One solid green LED: Approximately 0%-25% battery.

Figure 4: Battery (green) and Output (blue) indicator LEDs on the Nitecore EDC25.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The Nitecore EDC25 features a dual tail button design for intuitive control.

Figure 5: The innovative dual tail buttons of the EDC25, designed for tactical applications.

Power Button (Two-Stage Tactical Button)

• Full Press: Fully press the Power Button to turn the flashlight ON or ഓഫ്.
• Half Press: When the flashlight is ON, half-press the Power Button to cycle through the four brightness levels: Ultralow, Low, Mid, High.

Customizable Tactical Button (Strobe / Turbo Selectable)

This button provides instant access to either Turbo or Strobe mode, depending on your preference.

• Instant Turbo/Strobe: Press and hold the Customizable Tactical Button without releasing it to activate the selected mode (Turbo or Strobe). Release to turn off.
• സ്വിച്ചിംഗ് മോഡുകൾ: While holding the Customizable Tactical Button, fully press the Power Button once to alternate between Turbo and Strobe modes.

ലോക്ക out ട്ട് മോഡ്

To prevent accidental activation, the EDC25 features a lockout mode.

• Engage Lockout: With the flashlight OFF, press and hold both the Power Button and the Customizable Tactical Button simultaneously for 2 seconds. The red indicator light will blink once to confirm lockout.
• Disengage Lockout: Repeat the same action (press and hold both buttons for 2 seconds). The red indicator light will blink twice to confirm unlock.

Figure 6: The red lockout indicator blinking once, confirming lockout mode engagement.

Figure 7: The red lockout indicator blinking twice, confirming lockout mode disengagement.

മെയിൻ്റനൻസ്

• വൃത്തിയാക്കൽ: Wipe the flashlight with a clean, soft cloth. For stubborn dirt, a slightly damp തുണി ഉപയോഗിക്കാം. കഠിനമായ രാസവസ്തുക്കളോ ഉരച്ചിലുകളോ ഉള്ള വസ്തുക്കൾ ഒഴിവാക്കുക.
• ചാർജിംഗ് പോർട്ട്: Keep the USB-C charging port clean and free of debris. Always ensure the protective cover is securely closed when not charging to prevent dust and water ingress.
• സംഭരണം: Store the flashlight in a cool, dry place away from direct sunlight and extreme temperatures. If storing for extended periods, charge the battery periodically to maintain its health.
• ചൂട് മാനേജ്മെൻ്റ്: The flashlight may become warm during prolonged use, especially in Turbo or High modes. This is normal. Allow the device to cool down if it becomes excessively hot.

ട്രബിൾഷൂട്ടിംഗ്

സ്പെസിഫിക്കേഷനുകൾ

Figure 8: Detailed technical specifications for the Nitecore EDC25 across various output modes.

വാറൻ്റിയും പിന്തുണയും

The Nitecore EDC25 comes with a Limited Warranty. For specific warranty terms, conditions, and support inquiries, please refer to the official Nitecore webസൈറ്റിൽ ബന്ധപ്പെടുകയോ അവരുടെ ഉപഭോക്തൃ സേവനവുമായി നേരിട്ട് ബന്ധപ്പെടുകയോ ചെയ്യുക. വാറന്റി ക്ലെയിമുകൾക്കുള്ള വാങ്ങലിന്റെ തെളിവായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.

കൂടുതൽ സഹായത്തിന്, നിങ്ങൾക്ക് സന്ദർശിക്കാവുന്നതാണ് Nitecore Store on Amazon.