XGP X10 Motorcycle Intercom User Manual

1. ആമുഖവും അവസാനവുംview

The XGP X10 Motorcycle Intercom is a cost-effective Bluetooth headset designed to provide motorcycle riders with high-quality sound and stable wireless connections. It enhances your riding experience by allowing seamless enjoyment of music, navigation, and calls while on the road. Featuring the latest Mesh intercom 3.0 technology and Dual-core Qualcomm Bluetooth V5.3, the X10 offers advanced communication capabilities for up to 10 riders.

പ്രധാന സവിശേഷതകൾ:

• 10 Riders Group Mesh 3.0 Intercom: Supports up to 10 riders within a 3km mesh network for uninterrupted, crystal-clear audio. Features one-click connection for easy setup.
• Audio Multitasking & Music Sharing: Dual-core Qualcomm Bluetooth V5.3 allows simultaneous music playback and intercom communication, or phone calls and intercom. Share music with fellow riders within 50 meters.
• Long Battery Life & IP67 Waterproof: Equipped with a 1000mAh battery providing 15-18 hours of music, call, and intercom talk time. IP67 waterproof rating ensures durability in various weather conditions (-4°F to 140°F).
• Cross-Brand Connectivity & Precise Button Control: Communicate with riders using different headset brands. Large, easy-to-press buttons allow for blind operation, enhancing safety.
• DSP/CVC and Microphone Noise Cancelling & 40mm Hi-fi Stereo Speaker: DSP/CVC noise reduction technology filters background noise for clear audio. 40mm Hi-fi speakers deliver rich, detailed sound with powerful bass and clear mid-high notes.

2. ബോക്സിൽ എന്താണുള്ളത്?

Your XGP X10 package includes the following components:

• X10 Main Unit
• 40mm Hi-fi Speaker
• ബൂം മൈക്രോഫോൺ
• ബട്ടൺ മൈക്രോഫോൺ
• ഉപയോക്തൃ മാനുവൽ
• മെറ്റൽ ബ്രാക്കറ്റ്
• 3M Sticker Bracket
• യുഎസ്ബി-സി കേബിൾ
• സ്പീക്കർ പാഡുകൾ
• ഗിഫ്റ്റ് ബോക്സ്

Image: Contents of the XGP X10 product package.

3. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Follow these steps to install your XGP X10 Motorcycle Intercom into your helmet.

3.1. Helmet Preparation

1. Carefully remove the helmet's internal padding, especially around the ear areas, to expose the speaker pockets. Most helmets have designated voids for speakers.

3.2 സ്പീക്കർ ഇൻസ്റ്റാളേഷൻ

2. Identify the left and right speakers. The speaker with the shorter wire is typically for the side where the main unit will be mounted (usually the left side for throttle control). The longer wire connects to the opposite side.
3. Place the speakers into the ear pockets of your helmet. Use the provided speaker pads or Velcro (if your helmet has it) to secure them. Ensure the speakers are positioned directly over your ears for optimal sound quality.
4. Route the speaker wires neatly under the helmet padding. It is recommended to route excess wire towards the back of the helmet to keep it out of the way.

3.3. മൈക്രോഫോൺ ഇൻസ്റ്റാളേഷൻ

The X10 comes with two microphone options: a soft wire microphone and a boom microphone. Choose the one that best suits your helmet type and preference.

• Soft Wire Microphone: Ideal for full-face helmets. Attach it to the inside of the chin bar, close to your mouth, using the adhesive backing.
• ബൂം മൈക്രോഫോൺ: Suitable for modular or open-face helmets. Attach the boom to the inside of the chin bar, positioning the microphone close to your mouth.

4. Connect the chosen microphone to the designated port on the speaker wiring harness.
5. Route the microphone wire along the helmet's interior, tucking it securely under the padding to prevent interference.

3.4. Main Unit Mounting

The main X10 unit can be mounted using either a 3M adhesive bracket or a clamp ബ്രാക്കറ്റ്.

• 3M Adhesive Bracket: Clean the desired mounting area on the side of your helmet. Peel off the backing from the 3M adhesive and firmly press the bracket onto the helmet. Allow sufficient time for the adhesive to bond.
• Clamp ബ്രാക്കറ്റ്: cl സ്ലൈഡ് ചെയ്യുകamp bracket onto the edge of your helmet, ensuring a secure fit. This option is often preferred for easy removal and reattachment.

6. Once the bracket is securely attached, slide the X10 main unit onto the bracket until it clicks into place.
7. Connect the main wiring harness (from the speakers and microphone) to the port on the bottom of the X10 main unit. Ensure all wires are neatly tucked away and do not interfere with helmet operation or comfort.

Image: The XGP X10 main unit.

Image: XGP X10 unit mounted on a helmet.

4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

4.1. പവർ ഓൺ/ഓഫ്

• പവർ ഓൺ: Press and hold the main button until the indicator light turns on.
• പവർ ഓഫ്: Press and hold the main button until the indicator light turns off.

4.2. Bluetooth Pairing (for Phone/GPS)

1. With the device off, press and hold the main button until the indicator light flashes rapidly, indicating pairing mode.
2. On your phone or GPS device, search for Bluetooth devices and select "XGP X10".
3. Once connected, the indicator light will change.

4.3. Intercom Operation (Mesh 3.0)

The X10 supports Mesh intercom 3.0 for group communication with up to 10 riders.

• ഒറ്റ-ക്ലിക്ക് കണക്ഷൻ: For group pairing, ensure all X10 units are in pairing mode. Press the intercom button on one unit to initiate the one-click connection process. The units will automatically search and connect to each other.
• ഇന്റർകോം ആരംഭിക്കുക/അവസാനം ചെയ്യുക: Briefly press the intercom button to start or end an intercom conversation.
• Cross-Brand Connectivity: The X10 can connect with other headset brands. Refer to the specific pairing instructions for the other brand's device to establish a connection.

Image: XGP X10 Mesh Communication 3.0 for up to 10 riders.

4.4. Audio Multitasking & Music Sharing

• Audio Multitasking: The X10 allows you to have helmet-to-helmet intercom conversations while simultaneously listening to music or GPS navigation. You can also answer incoming calls during an intercom conversation.
• സംഗീതം പങ്കിടൽ: While listening to music, activate music sharing mode (refer to the detailed manual for specific button press). Your connected rider can then listen to the same music. Optimal sharing distance is within 50 meters or between rider and passenger.

Image: XGP X10 Audio Multitasking capability.

4.5. Volume Control & Track Navigation

• വോളിയം: Use the rotary knob on the main unit to adjust the volume up or down.
• അടുത്തത് / മുമ്പത്തെ ട്രാക്ക്: Use the dedicated buttons (refer to the manual for exact button layout) to skip to the next or previous music track.

4.6. Voice Assistant (Siri/Google)

• Activate your phone's voice assistant (Siri or Google Assistant) with a simple voice command or button press (refer to manual). This allows for hands-free control of navigation, music, and calls.

Image: XGP X10 integration with Siri and Google Voice Assistant.

5. പരിപാലനം

Proper maintenance ensures the longevity and optimal performance of your XGP X10 intercom.

• വൃത്തിയാക്കൽ: ഒരു സോഫ്റ്റ് ഉപയോഗിക്കുക, ഡിamp cloth to clean the main unit and speakers. Avoid using harsh chemicals or abrasive materials.
• ചാർജിംഗ്: Charge the device using the provided USB-C cable. Avoid overcharging or using damaged cables.
• സംഭരണം: Store the intercom in a cool, dry place when not in use. Avoid extreme temperatures.
• ജല പ്രതിരോധം: While IP67 waterproof, avoid prolonged submersion or high-pressure water jets. Ensure the charging port cover is securely closed before exposure to water.

6. പ്രശ്‌നപരിഹാരം

If you encounter issues with your XGP X10, try the following troubleshooting steps:

• ശക്തിയില്ല: Ensure the battery is charged. Connect the device to a power source and check the charging indicator.
• ശബ്‌ദമില്ല/കുറഞ്ഞ ശബ്‌ദം: Check the volume level on both the intercom and your connected device. Ensure speakers are correctly positioned over your ears. Some users have noted that volume can be low at higher speeds; ensure speakers are as close to the ear as possible.
• ഇന്റർകോം വിച്ഛേദിക്കൽ: Ensure all units are within the effective range (up to 3km in mesh network). Re-initiate the one-click connection process.
• ബ്ലൂടൂത്ത് ജോടിയാക്കൽ പ്രശ്നങ്ങൾ: Turn off and restart both the intercom and your Bluetooth device. Clear previous Bluetooth connections on your device and try pairing again.
• Poor Microphone Quality: Ensure the microphone is positioned correctly near your mouth and not obstructed. Check for any damage to the microphone or its connection. DSP/CVC noise reduction should minimize background noise.
• ഉപകരണം പ്രതികരിക്കുന്നില്ല: Perform a hard reset (refer to the detailed manual for specific reset instructions, usually a long press of a combination of buttons).

7 സ്പെസിഫിക്കേഷനുകൾ

8. വാറൻ്റിയും പിന്തുണയും

For warranty information and customer support, please refer to the warranty card included in your product packaging or contact the seller directly through the platform where you purchased the XGP X10. Keep your proof of purchase for warranty claims.