VIVOHOME 1/2 HP 3200GPH ഓട്ടോമാറ്റിക് പൂൾ കവർ പമ്പ് ഇൻസ്ട്രക്ഷൻ മാനുവൽ

1. ആമുഖം

This manual provides essential information for the safe and efficient operation and maintenance of your VIVOHOME 1/2 HP 3200GPH Automatic Pool Cover Pump. Please read these instructions thoroughly before installation and use, and retain them for future reference.

2 സുരക്ഷാ വിവരങ്ങൾ

• Always disconnect the pump from the power supply before performing any maintenance or cleaning.
• Ensure the power cord and plug are in good condition. Do not use if damaged.
• This pump is designed for water only. Do not use it for flammable liquids, corrosive chemicals, or water containing excessive debris like mud or large gravel.
• Do not run the pump dry. The automatic switch is designed to prevent this, but always monitor operation.
• പമ്പ് പ്രവർത്തിപ്പിക്കുമ്പോൾ കുട്ടികളെയും വളർത്തുമൃഗങ്ങളെയും അതിൽ നിന്ന് അകറ്റി നിർത്തുക.
• The pump is equipped with thermal overload protection. If it stops unexpectedly, allow it to cool down before restarting.
• Ensure the electrical outlet is properly grounded and protected by a Ground Fault Circuit Interrupter (GFCI).

3. പാക്കേജ് ഉള്ളടക്കം

എല്ലാ ഘടകങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:

• VIVOHOME 1/2 HP 3200GPH Automatic Pool Cover Pump
• 25 അടി പവർ കോർഡ്
• Adaptor x 3 (various sizes for hose connection)
• Clamp x 2
• സീലിംഗ് റിംഗ് x 2
• 90° Connector x 1

4 സ്പെസിഫിക്കേഷനുകൾ

ചിത്രം 1: Product dimensions and package specifications. This image provides a visual representation of the pump's physical dimensions (length, width, height) and cable length, along with package dimensions and weight.

5. സജ്ജീകരണം

5.1 അൺപാക്കിംഗും പരിശോധനയും

Carefully remove all components from the packaging. Inspect the pump and accessories for any signs of damage. If any damage is found, do not proceed with installation and contact customer support.

5.2 ഹോസ് കണക്ഷൻ

The pump includes various adaptors, seals, and clamps to connect to different hose sizes. For optimal flow rate, it is recommended to use 1-1/2" or 1-1/4" garden hoses. The 90° connector is useful for operating in tight spaces.

1. Select the appropriate adaptor for your hose size.
2. Attach the adaptor to the pump's discharge port. Use a sealing ring to ensure a watertight connection.
3. Secure the hose to the adaptor using the provided clamps. Ensure a tight fit to prevent leaks.
4. If needed, attach the 90° connector before the adaptor for angled discharge.

ചിത്രം 2: Included accessories for hose connection. This image displays the pump with its various connectors, clamps, and sealing rings, illustrating how different hose sizes can be attached for drainage.

5.3 പമ്പ് പ്ലേസ്മെന്റ്

Place the pump on a stable, flat surface in the area to be drained. The detachable strainer base helps keep the pump off the bottom surface and prevents leaves and debris from entering the pump body. Ensure the pump is fully submerged in water before connecting power.

ചിത്രം 3: The VIVOHOME 1/2 HP 3200GPH Automatic Pool Cover Pump. This image shows the complete pump unit with its power cord and discharge port, ready for connection.

ചിത്രം 4: The pump in operation, effectively draining water from a pool. This image demonstrates the pump submerged in water, with water being discharged through an attached hose.

5.4 പവർ കണക്ഷൻ

Connect the 25ft power cord to a standard 120V AC grounded electrical outlet. For safety, ensure the outlet is protected by a Ground Fault Circuit Interrupter (GFCI).

6. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

6.1 ഓട്ടോമാറ്റിക് പ്രവർത്തനം

The VIVOHOME pump features an automatic ON/OFF switch designed to prevent dry running and protect against water shortage. The pump will:

• സ്വയമേവ ആരംഭിക്കുക when the water level reaches approximately 4/5" (20mm).
• Stop automatically when the water level drops below approximately 2/5" (10mm).

ചിത്രം 5: Automatic switch mechanism. This diagram illustrates how the pump's automatic sensor activates when water reaches 4/5" and deactivates when it falls below 2/5", preventing dry operation.

6.2 Thermal Overload Protection

The pump is equipped with an overheating protection device to prevent damage. If the internal temperature reaches 221°F (105°C), the pump will stop operating automatically. It will resume operation once the temperature drops to 167°F (75°C) or below. This feature extends the service life of the pump and ensures user safety.

ചിത്രം 6: Thermal overload protection system. This image shows a cutaway view of the pump, highlighting the thermal sensor that stops the pump at 221°F and restarts it at 167°F.

6.3 High Flow Rate

The 1/2 HP motor provides a high flow rate of up to 3200 Gallons Per Hour (GPH), making it efficient for draining large volumes of water. The pump is designed to handle water with small debris, but it is not recommended for extreme conditions with heavy garbage or mud.

ചിത്രം 7: High flow rate and debris handling. This diagram illustrates the pump's internal mechanism and its ability to process water with small amounts of mud, rubbish, and weed, achieving a 3200 GPH flow rate.

6.4 അപേക്ഷകൾ

This submersible water pump is suitable for various draining tasks, including:

• Swimming pool covers
• Ground swimming pools
• ചൂടുള്ള ട്യൂബുകൾ
• നിലവറകൾ
• മേൽക്കൂരകൾ
• Water beds
• Ponds (ensure a mesh filter bag is used if small stones or gravel are present)

7. പരിപാലനം

7.1 Cleaning the Strainer Base

The detachable strainer base can effectively filter leaves and debris, preventing clogging. Regularly inspect and clean the strainer base to maintain optimal pump performance. To clean:

1. വൈദ്യുതി വിതരണത്തിൽ നിന്ന് പമ്പ് വിച്ഛേദിക്കുക.
2. വെള്ളത്തിൽ നിന്ന് പമ്പ് നീക്കം ചെയ്യുക.
3. Detach the strainer base by twisting or unlatching it (refer to product diagram for specific mechanism).
4. Rinse the strainer base and the pump's intake area with clean water to remove any accumulated debris.
5. Reattach the strainer base securely before next use.

7.2 ശീതകാലം

The pump is equipped with automatic freeze protection, allowing it to function normally even in winter conditions. However, for prolonged storage or in extremely harsh freezing conditions, it is recommended to:

• Drain all water from the pump and hose.
• പമ്പ് നന്നായി വൃത്തിയാക്കുക.
• പമ്പ് വരണ്ടതും മഞ്ഞ് വീഴാത്തതുമായ സ്ഥലത്ത് സൂക്ഷിക്കുക.

8. പ്രശ്‌നപരിഹാരം

9. വാറൻ്റിയും പിന്തുണയും

For warranty information or technical support, please refer to the warranty card included with your product or contact VIVOHOME customer service directly. Keep your purchase receipt as proof of purchase.

VIVOHOME Customer Service: Visit the VIVOHOME Store on Amazon