എയർ കംപ്രസർ ഇൻസ്ട്രക്ഷൻ മാനുവൽ ഉള്ള AstroAI S8 എയർ ജമ്പ് സ്റ്റാർട്ടർ

ആമുഖം

The AstroAI S8 Air Jump Starter with Air Compressor is a versatile and essential tool for vehicle owners. This portable device combines a powerful jump starter for dead batteries with a high-pressure air compressor for tire inflation, along with additional emergency features. Designed for ease of use and safety, it provides reliable assistance in various situations.

പ്രധാന സവിശേഷതകൾ

• High Performance Jump Starter: 3000A peak lithium booster, capable of up to 20 jump starts on a single charge. Suitable for up to 9L gasoline and 6.5L diesel engines. Operates reliably between -4°F and 140°F.
• Portable Air Compressor & Tire Inflator: 150PSI air compressor with 5 preset modes (PSI, KPA, BAR) for cars, motorcycles, bikes, and balls. Features automatic shut-off at preset value and 25L/Min fast inflation.
• Enhanced Safety & Quality: 10 built-in protection features to prevent misoperation. UL & FCC Certifications ensure national safety standards. Durable ABS housing.
• Unique 2.4" Large Screen: Intuitive digital display readable in bright sunlight, showing operational status, battery level, error codes, and real-time pressure values.
• പോർട്ടബിൾ & ഒതുക്കമുള്ള ഡിസൈൻ: Space-saving design with integrated storage for power cord and accessories. Widened honeycomb hole design reduces jumpstarting temperature by 30%.
• ഓൾ-ഇൻ-വൺ പ്രവർത്തനം: Includes car emergency jumpstarting, air compressor, 3 light modes (flashlight, SOS warning, strobe), and a power bank with USB ports for charging mobile devices.

പാക്കേജ് ഉള്ളടക്കം

The AstroAI S8 Air Jump Starter package includes:

• AstroAI S8 Air Jump Starter Unit
• സ്മാർട്ട് ജമ്പർ Clamps
• എയർ ഹോസ്
• Various Nozzles/Adapters for inflation
• USB-C ചാർജിംഗ് കേബിൾ
• ഉപയോക്തൃ മാനുവൽ
• പോർട്ടബിൾ സ്റ്റോറേജ് ബാഗ്

Image: The AstroAI S8 Air Jump Starter unit shown with its included accessories: jumper clamps, air hose, various nozzles, USB-C charging cable, and a storage bag.

സുരക്ഷാ വിവരങ്ങൾ

Your safety is paramount. Please read and understand all safety instructions before using this product.

• The device features 10 built-in protection mechanisms to prevent misoperation, including reverse polarity, overcurrent, overcharge, overdischarge, high temperature, reverse connection, overvoltage, overload, short circuit, and spark-proof protection.
• Ensure proper connection of jumper clamps: Red clamp to positive (+) battery terminal, Black clamp to negative (-) battery terminal or vehicle chassis.
• Do not attempt to jumpstart a frozen or severely damaged battery.
• Allow the air compressor to rest for at least 10 minutes after 10 minutes of continuous operation to prevent overheating.
• The air tube will be hot after inflation. Wait until it cools off before removing.
• This product meets national standard UL & FCC Certifications.

Image: Diagram illustrating the 10 comprehensive protection features of the AstroAI S8 Air Jump Starter, including reverse polarity, overcurrent, overcharge, and more.

സജ്ജീകരണവും ചാർജിംഗും

Before first use, fully charge the AstroAI S8 Air Jump Starter. For extended storage, recharge every 2-3 months to maintain battery health.

1. Connect the provided USB-C charging cable to the unit's USB-C input port.
2. Connect the other end of the USB-C cable to a compatible USB wall adapter (not included).
3. The digital screen will indicate the charging status and battery level.
4. പൂർണ്ണമായി ചാർജ് ചെയ്തുകഴിഞ്ഞാൽ, പവർ സ്രോതസ്സിൽ നിന്ന് യൂണിറ്റ് വിച്ഛേദിക്കുക.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

1. ഒരു വാഹനം ജമ്പ് സ്റ്റാർട്ട് ചെയ്യുക

1. Ensure the jump starter unit is sufficiently charged.
2. Insert the smart jumper clamp plug into the jump starter's port. The indicator light on the clamp will flash red and green alternately.
3. ചുവന്ന cl കണക്റ്റുചെയ്യുകamp വാഹന ബാറ്ററിയുടെ പോസിറ്റീവ് (+) ടെർമിനലിലേക്ക്.
4. കറുപ്പ് cl കണക്റ്റുചെയ്യുകamp to the negative (-) terminal of the vehicle battery or a suitable ground point on the vehicle chassis. The indicator light on the smart clamp should turn solid green, indicating a correct connection. If it flashes red/green, check connections.
5. വാഹനം സ്റ്റാർട്ട് ചെയ്യുക.
6. Once the vehicle is started, immediately remove the jumper cable from the car battery.

Note: If the vehicle does not start successfully, wait for 60 seconds and then repeat the above steps. Do not connect the two clips together, as this may damage the product.

Image: The AstroAI S8 Air Jump Starter connected to a car battery, demonstrating the jumpstarting process.

2. Using the Air Compressor

1. Screw the air hose into the unit's air interface.
2. ടയർ വാൽവ് സ്റ്റെമിലേക്ക് എയർ ഹോസ് ഘടിപ്പിക്കുക.
3. Press the power button to turn on the unit. The screen will display the current tire pressure.
4. Press the 'M' (Mode) button to select the desired inflation mode (car, motorcycle, bicycle, ball, or custom).
5. Use the '+' and '-' buttons to adjust the preset pressure value.
6. Press the Start/Stop button to begin inflation. The unit will automatically turn off once the preset pressure is reached.
7. Carefully disconnect the air hose from the tire valve. Note: The air tube will be hot after inflation.

Image: The AstroAI S8 Air Jump Starter actively inflating a car tire, showing the digital display with pressure readings.

3. Using the Flashlight and Power Bank

• ഫ്ലാഷ്ലൈറ്റ്: Press and hold the light button to turn on the LED light. Press again to cycle through normal, SOS, and strobe modes.
• ശക്തി സംഭരണി: Use the USB-A output ports to charge mobile devices. The USB-C port is for charging the jump starter itself.

Image: The AstroAI S8 Air Jump Starter being used as an emergency flashlight under a car hood.

മെയിൻ്റനൻസ്

• To ensure optimal performance, fully charge the unit before first use.
• Operate and store the unit within -4°F to 140°F (-20°C to 60°C). Extreme temperatures can degrade battery life.
• For extended storage, recharge the unit every 2-3 months to maintain battery health.
• Keep the unit clean and dry. Avoid dropping or exposing to water.

പ്രശ്ന പരിഹാരത്തിന് സഹായിക്കുന്ന മാർഗധർശി

Refer to the indicator light troubleshooting guide on the smart clamp for common issues:

• ചുവന്ന ലൈറ്റ് എപ്പോഴും ഓണാണ്: cl ആണോ എന്ന് പരിശോധിക്കുകamps are reversed (red to negative, black to positive). Reconnect correctly.
• The red light is always on, and the buzzer beeps quickly: Check whether the clips are connected together or if the same metal conductor is always touching. Remove the clip from the car battery and reconnect it.
• The red light is always on, and the buzzer beeps slowly: The car battery is severely discharged. Press the BOOST button for 3 seconds, wait for the green light to turn solid, and start the vehicle within 30 seconds.
• No light is on: The car battery may be completely dead. Press the BOOST button for 3 seconds, wait for the green light to turn solid, and start the vehicle within 30 seconds.
• Error E1 (Low temperature charging protection): Stop charging. It will automatically release protection when the temperature rises above 2°C.
• Error E2 (High temperature charging protection): Stop charging. It will automatically release protection when the temperature is lower than 45°C.
• Error E3 (High temperature discharge protection): Stop discharging. It will automatically release protection when the temperature is lower than 65°C.
• Error E7 (Cylinder over temperature protection): Automatically release the protection when the temperature is lower than 70°C. After the protection is released, please wait for 10 minutes before continuing to operate.

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

AstroAI provides a warranty for this product. For any product issues, questions, or concerns, please contact our technical support team. You can typically find support contact information on the AstroAI website or within the user manual provided with your product.

വാറന്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.