Svetaecho Wireless Controller Instruction Manual

ആമുഖം

This manual provides detailed instructions for the Svetaecho Wireless Controller. This controller is designed for use with Nintendo Switch, Switch Lite, Switch OLED, Windows PC (wired connection), iOS, and Android devices. Please read this manual thoroughly before use to ensure proper operation and to maximize your gaming experience.

കുറിപ്പ്: This controller does not support Xbox games.

ഉൽപ്പന്ന സവിശേഷതകൾ

• Customizable Macro Buttons: Two back buttons (ML/MR) can be programmed to map 1-20 combined functions from A/B/X/Y/L/ZL/R/ZR/L3/R3/D-pad for enhanced gameplay. Double-click SR/SL to temporarily enable/disable macro functions.
• Adjustable Turbo Function: Supports both Auto and Manual Turbo modes with three adjustable speeds: 5 shots/s, 12 shots/s, and 20 shots/s.
• ഡ്യുവൽ വൈബ്രേഷൻ മോട്ടോറുകൾ: Built-in motors provide 3-level vibration feedback (None, Weak, Strong) for Switch and Windows PC games. Adjust intensity by pressing and holding L, R, ZL, ZR simultaneously.
• 6-ആക്സിസ് ഗൈറോ സെൻസർ: High-sensitivity gyro sensors offer precise motion control for Nintendo Switch games.
• One-Key Wake-Up (Switch Only): After initial connection, press the HOME button to wake up and reconnect the Switch console.
• ഉയർന്ന ശേഷിയുള്ള ബാറ്ററി: Integrated 1000mAh battery provides over 16 hours of playtime in LED lit mode. Fully charges in approximately 3 hours via USB Type-C.
• ഓട്ടോമാറ്റിക് സ്ലീപ്പ് മോഡ്: The controller automatically shuts down after 20 minutes of inactivity in a connected state. Press the HOME button to wake and reconnect.

പാക്കേജ് ഉള്ളടക്കം

• 1x Svetaecho Wireless Controller
• 1x യുഎസ്ബി ടൈപ്പ്-സി ചാർജിംഗ് കേബിൾ
• 1x ഉപയോക്തൃ മാനുവൽ (ഈ പ്രമാണം)

കൺട്രോളർ ലേഔട്ട്

ചിത്രം: ഫ്രണ്ട് view of the Svetaecho Wireless Controller, highlighting the main buttons, joysticks, D-pad, and the M1/M2 back buttons.

The controller features standard gaming buttons including A, B, X, Y, L, R, ZL, ZR, D-pad, Left and Right Analog Sticks, HOME button, SHARE button, TURBO button, and two programmable back buttons (M1/ML and M2/MR).

ചിത്രം: പിൻഭാഗം view of the Svetaecho Wireless Controller, showing the SR, SL, and M buttons, along with the ML and MR programmable back buttons.

സജ്ജീകരണവും ജോടിയാക്കലും

1. Nintendo Switch Pairing

1. From the Switch HOME Menu, select 'Controllers' > 'Change Grip/Order'.
2. Press and hold the HOME button on the Svetaecho controller for 3-5 seconds until the LED indicators begin to flash rapidly.
3. കണക്ട് ചെയ്തുകഴിഞ്ഞാൽ, കൺട്രോളറിലെ അനുബന്ധ പ്ലെയർ LED(കൾ) സോളിഡ് ആയി പ്രകാശിക്കും.
4. To wake up the Switch console after the first connection, simply press the HOME button on the controller.

2. PC (Wired Connection)

1. Connect the controller to your Windows PC using the provided USB Type-C cable.
2. The controller will be automatically recognized as a wired gamepad.
3. Vibration function is supported on Windows PC.

3. iOS/Android Pairing (Wireless)

ചിത്രം: The Svetaecho Wireless Controller shown alongside various compatible devices including Nintendo Switch, PC, iOS, and Android phones/tablets.

1. Ensure Bluetooth is enabled on your iOS or Android device.
2. Press and hold the HOME button on the controller for 3-5 seconds until the LED indicators flash rapidly.
3. On your device, search for Bluetooth devices and select the controller (e.g., 'Pro Controller' or similar).
4. ജോടിയാക്കിയാൽ, LED സൂചകങ്ങൾ ഉറച്ചതായിത്തീരും.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

1. Custom Macro Buttons (ML/MR)

• പ്രോഗ്രാമിംഗ്: Press and hold the 'M' button, then press the ML or MR button you wish to program. The LED will flash. Now, press the sequence of buttons (up to 20) you want to assign. Press ML or MR again to save the macro.
• Using Macro: Simply press the programmed ML or MR button to execute the assigned sequence.
• Enable/Disable Macro: Double-click the SR or SL button to temporarily enable or disable the macro function.

2. ടർബോ ഫംഗ്ഷൻ

ചിത്രം: The Svetaecho Wireless Controller illustrating the three adjustable Turbo speeds: 5 shots/s, 12 shots/s, and 20 shots/s.

• മാനുവൽ ടർബോ: Press and hold the TURBO button, then press the desired action button (A/B/X/Y/L/R/ZL/ZR) to enable Turbo for that button. Release TURBO. Now, holding the action button will trigger rapid presses.
• ഓട്ടോ ടർബോ: Press and hold the TURBO button, then double-press the desired action button. Release TURBO. The action button will now continuously trigger rapid presses without being held down.
• ടർബോ സ്പീഡ് ക്രമീകരിക്കുന്നു: With Turbo enabled for a button, press and hold the TURBO button, then move the Right Analog Stick Up or Down to cycle through the three speeds (5, 12, 20 shots/s).
• Clearing Turbo: To clear Turbo for a single button, press and hold TURBO, then press the action button twice. To clear all Turbo settings, press and hold the TURBO button for 5 seconds.

3. Vibration Adjustment (Switch/PC Only)

ചിത്രം: The Svetaecho Wireless Controller highlighting its 6-axis gyro sensor for precise motion control and dual motor vibration with adjustable intensity levels (None, Weak, Strong).

To cycle through vibration intensities (None, Weak, Strong), press and hold the L, R, ZL, and ZR buttons simultaneously.

4. Motion Control (Switch Only)

The built-in 6-axis gyro sensor provides motion control capabilities for compatible Nintendo Switch games. No special setup is required; the feature activates automatically when supported by the game.

5. LED Lighting Modes

The controller features multi-RGB lighting. Specific instructions for changing LED modes are typically found in the quick start guide or by pressing a dedicated button (often indicated by a lightbulb icon) on the controller. Refer to the quick start guide for detailed steps on adjusting LED patterns and colors.

ബാറ്ററിയും ചാർജിംഗും

ചിത്രം: ഒരു പൊട്ടിത്തെറിച്ചു view of the Svetaecho Wireless Controller showing the internal 1000mAh battery and the USB Type-C charging port with cable.

• കൺട്രോളറിൽ 1000mAh റീചാർജ് ചെയ്യാവുന്ന ബാറ്ററി സജ്ജീകരിച്ചിരിക്കുന്നു.
• Connect the controller to a USB power source (e.g., Switch dock, PC, USB wall adapter) using the provided USB Type-C cable to charge.
• ഒരു ഫുൾ ചാർജിന് ഏകദേശം 3 മണിക്കൂറാണ് ചാർജ്ജിംഗ് സമയം.
• A full charge provides over 16 hours of playtime with LED lighting active.
• The LED indicators will show charging status and turn off or change color when fully charged.

മെയിൻ്റനൻസ്

• Keep the controller dry and away from extreme temperatures.
• Clean the controller with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
• Do not attempt to disassemble the controller, as this may void the warranty and cause damage.
• Store the controller in a safe place when not in use to prevent accidental damage.

ട്രബിൾഷൂട്ടിംഗ്

• കൺട്രോളർ കണക്റ്റുചെയ്യുന്നില്ല: Ensure the controller is charged. Re-attempt the pairing process. For Switch, ensure 'Pro Controller Wired Communication' is enabled in system settings if using wired mode.
• ഇൻപുട്ട് ലാഗ് അല്ലെങ്കിൽ വിച്ഛേദിക്കൽ: Ensure there are no strong wireless interferences nearby. Move closer to the console/device. Ensure the controller battery is not low.
• ബട്ടണുകൾ പ്രതികരിക്കുന്നില്ല: Check if the macro function is temporarily disabled (double-click SR/SL). If the issue persists, try resetting the controller (a small reset button may be located on the back, often requiring a pin to press).
• വൈബ്രേഷൻ പ്രവർത്തിക്കുന്നില്ല: Ensure the vibration intensity is not set to 'None'. Check game settings for vibration support.
• കൺട്രോളർ ചാർജ് ചെയ്യുന്നില്ല: Ensure the USB-C cable is securely connected to both the controller and the power source. Try a different USB port or cable.

Firmware Update for Switch 2

ചിത്രം: A step-by-step guide demonstrating how to update the controller's firmware for Switch 2 compatibility using the 'KeyLinker' mobile application.

കുറിപ്പ്: All functions are supported except "One Press Home key to Wake up the Switch 2 console" and "Open voice menu" after the update.

1. ഘട്ടം 1: ഇതിനായി തിരയുക the "KeyLinker" app in your mobile app store, then download and install it.
2. ഘട്ടം 2: Turn on Bluetooth on your phone and pair the controller with your phone. (Refer to the pairing method in this manual).
3. ഘട്ടം 3: Open the "KeyLinker" app.
4. ഘട്ടം 4: In the app, search for the Bluetooth name "NC100" and tap to pair. (If the controller's Bluetooth name does not appear on the screen, press and hold the screen, then pull down to refresh several times.)
5. ഘട്ടം 5: Tap the three dots in the top right corner, then select "Update device".
6. ഘട്ടം 6: Enter the upgrade interface, tap "Update Now" at the bottom of the screen, and confirm. (If the update button doesn't appear, please wait a few minutes.)
7. ഘട്ടം 7: Wait for the update to complete. (If the upgrade fails, please try several more times.)

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റി & പിന്തുണ

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Svetaecho webസൈറ്റ്. വാറൻ്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.