1. ആമുഖം
This manual provides essential instructions for the proper installation, operation, and maintenance of your Akitas C10/C10 Turbo Vacuum Cleaner Pre-Filter Set. Please read this manual thoroughly before use to ensure optimal performance and longevity of your vacuum cleaner and filters. This pre-filter set is designed to capture fine dust and particles, protecting the vacuum motor and maintaining suction efficiency.
2 സുരക്ഷാ വിവരങ്ങൾ
- വാക്വം ക്ലീനർ എപ്പോഴും ഉറപ്പാക്കുക അൺപ്ലഗ്ഡ് from the power source before attempting to install, remove, or clean filters.
- Handle filters with care to avoid damage. Damaged filters may compromise vacuum performance and air quality.
- Use only genuine Akitas replacement filters for your C10/C10 Turbo vacuum cleaner to ensure compatibility and performance.
- Keep filters out of reach of children.
3. പാക്കേജ് ഉള്ളടക്കം
Your Akitas C10/C10 Turbo Pre-Filter Set package should contain the following items:
- 1x Washable Foam Pre-Filter (Black)
- 1x Washable Mesh Pre-Filter (White with Orange Rim)
This image displays the Akitas C10/C10 Turbo pre-filter set. It includes a circular black foam filter and a circular white mesh filter with a bright orange outer ring, designed to work together in your vacuum cleaner.
4. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
Follow these steps to install the pre-filter set into your Akitas C10 or C10 Turbo vacuum cleaner:
- പവർ ഓഫ്, അൺപ്ലഗ്: Ensure your vacuum cleaner is turned off and unplugged from the electrical outlet before proceeding.
- ഫിൽട്ടർ കമ്പാർട്ട്മെന്റ് കണ്ടെത്തുക: Refer to your vacuum cleaner's main instruction manual to locate the pre-filter compartment. This is typically near the dustbin.
- പഴയ ഫിൽട്ടറുകൾ നീക്കം ചെയ്യുക: Carefully remove the existing pre-filters. Dispose of them responsibly if they are no longer usable.
- പുതിയ ഫിൽട്ടറുകൾ ചേർക്കുക:
- First, place the white mesh pre-filter (with the orange rim) into the designated slot. Ensure it sits securely.
- Next, place the black foam pre-filter on top of the mesh filter. Ensure it is properly aligned and seated.
- കമ്പാർട്ട്മെന്റ് അടയ്ക്കുക: Securely close the filter compartment cover. Ensure it clicks into place to prevent air leaks.
- ഉപയോഗത്തിന് തയ്യാറാണ്: Your vacuum cleaner is now ready for operation with the new pre-filter set installed.
5. പ്രവർത്തന പരിഗണനകൾ
The pre-filter set functions automatically once correctly installed. For optimal vacuum performance:
- Ensure both the foam and mesh filters are always present and correctly seated before operating the vacuum.
- Regularly check the filters for visible dirt and debris, especially after heavy use.
- Do not operate the vacuum cleaner without the pre-filter set installed, as this can damage the motor and void your warranty.
6. പരിപാലനവും ശുചീകരണവും
The Akitas C10/C10 Turbo pre-filters are washable, allowing for extended use. Follow these cleaning instructions:
- ഫിൽട്ടറുകൾ നീക്കം ചെയ്യുക: Turn off and unplug the vacuum. Open the filter compartment and carefully remove both the foam and mesh filters.
- കഴുകുക: Rinse the filters under cool, running water until the water runs clear. Gently squeeze the foam filter to remove excess water and dirt. Do not twist or wring the filters forcefully.
- എയർ ഡ്രൈ: Allow both filters to air dry completely for at least 24 hours before re-installing them. Do not use a dryer or direct heat, as this can damage the filter material. Ensure they are bone dry to prevent mold or mildew growth and to maintain vacuum performance.
- വീണ്ടും ഇൻസ്റ്റാൾ ചെയ്യുക: Once completely dry, re-install the filters as described in the "Setup and Installation" section.
കുറിപ്പ്: The frequency of cleaning depends on usage. For optimal performance, clean the filters every 2-4 weeks or when you notice a decrease in suction power. Replace filters every 3-6 months, or sooner if they show signs of wear or damage.
7. പ്രശ്നപരിഹാരം
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| കുറഞ്ഞ സക്ഷൻ പവർ | ഫിൽട്ടറുകൾ വൃത്തികെട്ടതോ അടഞ്ഞതോ ആണ്. | Clean the pre-filters as per the "Maintenance and Cleaning" section. Ensure they are completely dry before re-installation. |
| വാക്വം ക്ലീനറിൽ നിന്നുള്ള അസുഖകരമായ ഗന്ധം | Filters are not completely dry after washing, leading to mold/mildew. | Ensure filters are thoroughly air-dried for at least 24 hours. If odor persists, replace the filters. |
| Filters do not fit correctly | Incorrect filter type or improper installation. | Verify you have the correct Akitas C10/C10 Turbo pre-filter set. Re-install filters carefully, ensuring proper alignment. |
8 സ്പെസിഫിക്കേഷനുകൾ
- ബ്രാൻഡ്: അക്കിറ്റാസ്
- മോഡൽ നമ്പർ: C10Prefilter
- അനുയോജ്യമായ ഉപകരണങ്ങൾ: Akitas C10, Akitas C10 Turbo Vacuum Cleaners
- മെറ്റീരിയൽ: Cotton (Foam and Mesh)
- ഉൽപ്പന്ന അളവുകൾ: ഏകദേശം 10 സെ.മീ (L) x 10 സെ.മീ (W) x 2 സെ.മീ (H)
- ഭാരം: ഏകദേശം 30 ഗ്രാം
- ഉൾപ്പെടുന്ന ഘടകങ്ങൾ: 1x Foam Filter, 1x Mesh Filter
- കഴുകാവുന്നത്: അതെ
9. വാറൻ്റിയും പിന്തുണയും
For specific warranty information regarding your Akitas C10/C10 Turbo Pre-Filter Set, please refer to the documentation provided with your original vacuum cleaner or contact Akitas customer support directly. If you encounter any issues or have questions not covered in this manual, please visit the official Akitas webസൈറ്റിൽ ബന്ധപ്പെടുക അല്ലെങ്കിൽ സഹായത്തിനായി അവരുടെ ഉപഭോക്തൃ സേവന വിഭാഗവുമായി ബന്ധപ്പെടുക.
You can often find support contact information on the Akitas Brand Store on Amazon.
