3M 90572-DC

3M WorkTunes Connect + AM/FM Wireless Hearing Protector User Manual

Model: 90572-DC

ഉൽപ്പന്നം കഴിഞ്ഞുview

The 3M WorkTunes Connect + AM/FM Wireless Hearing Protector is designed to provide hearing protection while allowing you to enjoy audio entertainment. It features Bluetooth wireless technology for streaming and calls, and excellent AM/FM radio performance. With a 26 dB Noise Reduction Rating (NRR), it helps safeguard your hearing in noisy environments. The headset is built for durability, being water and sweat resistant, and offers comfortable wear with conformable ear cushions and a vented headband.

3M WorkTunes Connect + AM/FM Wireless Hearing Protector

Figure 1: 3M WorkTunes Connect + AM/FM Wireless Hearing Protector headset and packaging.

പ്രധാന സവിശേഷതകൾ

സുരക്ഷാ വിവരങ്ങൾ

Always read and understand all instructions before using this product. Improper fit of this device will reduce its effectiveness. Ensure proper fit and seal for optimal hearing protection.

Decibel (dB) Levels of Common Sounds Chart

Figure 2: Chart illustrating common sound decibel levels and the risk of hearing damage above 85 dB.

സജ്ജമാക്കുക

ബാറ്ററി ഇൻസ്റ്റാളേഷൻ

  1. Locate the battery compartment on one of the earcups.
  2. ബാറ്ററി കമ്പാർട്ട്മെൻ്റ് കവർ തുറക്കുക.
  3. Insert two (2) AA batteries, ensuring correct polarity (+/-). Alternatively, insert the optional Alpha 1100 lithium-ion rechargeable battery.
  4. ബാറ്ററി കമ്പാർട്ട്മെൻ്റ് കവർ സുരക്ഷിതമായി അടയ്ക്കുക.
AA ബാറ്ററികൾ കാണിക്കുന്ന ബാറ്ററി കമ്പാർട്ട്മെന്റ്

Figure 3: Illustration of battery installation in the earcup.

Initial Fit and Adjustment

  1. Extend the headband sliders to their maximum length.
  2. Place the earcups over your ears, ensuring they fully cover your outer ears.
  3. Adjust the headband by sliding the earcups up or down until a comfortable and snug fit is achieved. The ear cushions should create a tight seal around your ears.
  4. The vented headband is designed for comfort and compatibility with headwear like baseball caps.
Man wearing 3M WorkTunes with a baseball cap, showing vented headband

Figure 4: Proper fit and adjustment of the headset, highlighting the vented headband.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

പവർ ഓൺ/ഓഫ്

Press and hold the Power button (usually located on the right earcup) until you hear an audible prompt indicating "Powering On" or "Powering Off."

ബ്ലൂടൂത്ത് ജോടിയാക്കൽ

  1. ഹെഡ്‌സെറ്റ് ഓണാണെന്ന് ഉറപ്പാക്കുക.
  2. നിങ്ങളുടെ മൊബൈൽ ഉപകരണത്തിൽ ബ്ലൂടൂത്ത് സജീവമാക്കുക.
  3. The headset will automatically enter pairing mode or you may need to press and hold the Bluetooth button. Look for "3M WorkTunes Connect" in your device's Bluetooth list.
  4. Select the headset to pair. An audible confirmation will indicate successful pairing.
Man using 3M WorkTunes with a smartphone, demonstrating Bluetooth connectivity

Figure 5: Bluetooth wireless technology allows streaming music and taking calls.

AM/FM റേഡിയോ പ്രവർത്തനം

  1. Press the FM/AM button to switch between radio modes.
  2. Use the Tune Up/Down buttons to scan for stations.
  3. Save favorite stations using the preset functions (refer to Audio-Assist guidance for specific steps).
Man wearing 3M WorkTunes, listening to radio

Figure 6: Enjoy excellent AM/FM radio performance with multiple equalizer options.

വോളിയം നിയന്ത്രണം

Adjust the volume using the dedicated volume controls on the earcup. The headset features a safe volume control/limiter that self-adjusts to help ensure you're listening at a safe volume throughout the day.

3M WorkTunes headset on a workbench, highlighting safe volume control

Figure 7: The Safe Volume Control/Limiter feature helps maintain safe listening levels.

കോളുകൾ ചെയ്യലും സ്വീകരിക്കലും

With the integrated microphone, you can make or take phone calls without removing your headset or reaching for your phone. Press the Call button to answer or end a call.

Man wearing 3M WorkTunes, touching earcup, indicating integrated microphone

Figure 8: The integrated microphone allows hands-free calling.

മെയിൻ്റനൻസ്

വൃത്തിയാക്കൽ

സംഭരണം

ഇയർകപ്പ് മാറ്റിസ്ഥാപിക്കൽ

Earcup cushions may need periodic replacement to maintain optimal performance and hygiene. Refer to 3M's official website or authorized dealers for replacement parts and instructions.

ട്രബിൾഷൂട്ടിംഗ്

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
No power/Headset won't turn on.ഡെഡ് അല്ലെങ്കിൽ തെറ്റായി ഇൻസ്റ്റാൾ ചെയ്ത ബാറ്ററികൾ.Check battery polarity. Replace with fresh AA batteries or ensure rechargeable battery is charged.
ബ്ലൂടൂത്ത് ഉപകരണവുമായി ജോടിയാക്കാൻ കഴിയില്ല.Headset not in pairing mode; device too far; interference.Ensure headset is in pairing mode. Move device closer. Turn off other Bluetooth devices. Try re-pairing.
മോശം റേഡിയോ സ്വീകരണം.Weak signal; antenna position.Adjust the antenna for better reception. Move to an area with stronger signal.
Low or distorted audio.Volume too low; poor connection; damaged audio source.Increase headset and device volume. Reconnect Bluetooth. Test with a different audio source.
Headset uncomfortable or loose.Improper adjustment.Adjust headband sliders for a snug and comfortable fit, ensuring earcups seal around ears.

സ്പെസിഫിക്കേഷനുകൾ

ഫീച്ചർവിശദാംശങ്ങൾ
മോഡൽ നമ്പർ90572-ഡിസി
നോയ്സ് റിഡക്ഷൻ റേറ്റിംഗ് (NRR)26 ഡി.ബി
കണക്റ്റിവിറ്റിBluetooth Wireless Technology, AM/FM Radio
പവർ ഉറവിടം2 x AA Batteries (not included) or optional Alpha 1100 Lithium-Ion Rechargeable Battery
ഭാരം13.6 ഔൺസ്
ഉൽപ്പന്ന അളവുകൾ3.98 x 6.97 x 9.57 ഇഞ്ച്
നിറംകറുപ്പ്
നിർമ്മാതാവ്3M Safety

വാറൻ്റിയും പിന്തുണയും

For warranty information, technical support, or to purchase replacement parts and accessories, please visit the official 3M Safety website or contact 3M customer service. Keep your purchase receipt as proof of purchase for warranty claims.

ഓൺലൈൻ പിന്തുണ: www.3m.com/safety

കസ്റ്റമർ സർവീസ്: Refer to the contact information provided on the product packaging or the 3M Safety webപ്രാദേശിക പിന്തുണയ്ക്കുള്ള സൈറ്റ്.