Perlegear Electric Ceiling TV Mount PGCM10 Instruction Manual

ആമുഖം

This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your Perlegear Electric Ceiling TV Mount (Model PGCM10). Please read this manual thoroughly before installation and retain it for future reference. This motorized mount is designed for flat or curved screen TVs ranging from 32 to 70 inches, with a maximum weight capacity of 88 lbs and VESA mounting patterns from 200x100mm to 600x400mm.

പ്രധാനപ്പെട്ട സുരക്ഷാ വിവരങ്ങൾ

മുന്നറിയിപ്പ്: Failure to read and follow all instructions may result in personal injury, property damage, or voiding of warranty. If you do not understand these instructions or have doubts about the safety of the installation, please contact customer support.

• Do not install on sloped ceilings. This mount is designed for flat roofs or concrete ceilings only.
• മൗണ്ടിംഗ് ഉപരിതലത്തിന് മൗണ്ടിന്റെയും ടിവിയുടെയും സംയുക്ത ഭാരം സുരക്ഷിതമായി താങ്ങാൻ കഴിയുമെന്ന് ഉറപ്പാക്കുക.
• Use only the provided hardware. If any parts are missing or defective, contact Perlegear customer support.
• പരമാവധി ഭാര ശേഷി 88 പൗണ്ട് (40 കിലോഗ്രാം) കവിയരുത്.
• ഈ ഉൽപ്പന്നത്തിൽ ചെറിയ ഇനങ്ങൾ അടങ്ങിയിരിക്കുന്നു, അത് വിഴുങ്ങിയാൽ ശ്വാസംമുട്ടുന്ന അപകടമാണ്. കുട്ടികളിൽ നിന്ന് അകലം പാലിക്കുക.
• Always use a stud finder to locate wood joists or ensure concrete is suitable for drilling.
• Two people are recommended for installation to ensure safety.

പാക്കേജ് ഉള്ളടക്കം

ഇൻസ്റ്റാളേഷനുമായി മുന്നോട്ടുപോകുന്നതിനുമുമ്പ് എല്ലാ ഘടകങ്ങളും നിലവിലുണ്ടെന്നും കേടുപാടുകൾ സംഭവിച്ചിട്ടില്ലെന്നും ഉറപ്പാക്കുക.

Image: All components of the Perlegear Electric Ceiling TV Mount, including the main motorized unit, remote control, and various hardware bags.

• Motorized Ceiling Mount Unit
• TV Bracket Assembly (various parts)
• റിമോട്ട് കൺട്രോൾ (2 AAA ബാറ്ററികൾ ആവശ്യമാണ്, ഉൾപ്പെടുത്തിയിട്ടില്ല)
• പവർ അഡാപ്റ്റർ
• Hardware Kit (bolts, washers, spacers, Allen key, wrench)
• ഡ്രില്ലിംഗ് ടെംപ്ലേറ്റ്
• ഇൻസ്ട്രക്ഷൻ മാനുവൽ

സ്പെസിഫിക്കേഷനുകൾ

Image: Visual summary of compatibility: TV size 32"-70", Max VESA 600x400mm, Min VESA 200x100mm, Max Load 88 lbs. Compatible with wood joist and wood wall installations.

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Before beginning, ensure you have all necessary tools and that the mounting location is suitable. This mount is not compatible with sloped ceilings.

Step 1: Function Test

Before full installation, perform a function test to ensure the motorized unit is working correctly.

1. Connect the power adapter to the motorized ceiling mount unit.
2. പവർ അഡാപ്റ്റർ ഒരു പവർ ഔട്ട്ലെറ്റിൽ പ്ലഗ് ചെയ്യുക.
3. റിമോട്ട് കൺട്രോളിലേക്ക് 2 AAA ബാറ്ററികൾ (ഉൾപ്പെടുത്തിയിട്ടില്ല) ചേർക്കുക.
4. Use the remote control to extend and retract the mount. Verify smooth operation.

Step 2: Attach the TV Bracket Assembly

Assemble the TV bracket arms to the center plate using the provided bolts and nuts. Ensure all connections are secure.

Image: The TV bracket assembly process, showing the attachment of the horizontal arms to the central plate.

Step 3: Attach the TV Bracket Assembly to Your TV

Depending on your TV's back panel design (flat or curved/with a bump), select the appropriate mounting option and use the correct screws and spacers from the hardware kit. Ensure the bracket is centered and securely fastened to the TV's VESA holes.

Image: Diagram illustrating the wide compatibility of the mount with various TV sizes (32"-70") and VESA patterns, along with the maximum load capacity of 88 lbs.

Step 4: Attach the Mount to the Ceiling

Locate the wood joists or suitable concrete area in your ceiling. Use the drilling template to mark pilot holes. Secure the main ceiling mount unit using the appropriate lag bolts for your ceiling type. Ensure the mount is firmly attached and level.

• For Wood Joists: Use a stud finder to locate the center of the wood joists. Mark and drill pilot holes. Secure the mount with lag bolts.
• For Concrete Ceilings: Use a concrete drill bit to drill pilot holes. Insert concrete anchors (not included, but typically required for concrete installations) and then secure the mount with lag bolts.

Image: The motorized ceiling mount securely installed, demonstrating its robust construction and ability to support a TV.

Step 5: Hang the TV on the Ceiling Mount

Carefully lift the TV (with the attached bracket) and align the keyhole slots on the TV bracket with the corresponding bolts on the ceiling mount. Slide the TV into place and ensure it is securely seated. Partially tighten the bolts to allow for level adjustment.

Image: The TV is shown attached to the ceiling mount, demonstrating its ability to extend and retract, and highlighting the 75-degree tilt and ±2° leveling features.

ഘട്ടം 6: ലെവൽ അഡ്ജസ്റ്റ്മെൻ്റ്

Before fully tightening the bolts, use the manual ±2° leveling feature to fine-tune your TV's horizontal position. Once level, fully tighten all bolts to secure the TV in place.

ഘട്ടം 7: കേബിൾ മാനേജ്മെൻ്റ്

Organize and secure all cables using the provided cable straps. This prevents cables from interfering with the motorized mechanism and ensures a clean, tidy appearance.

Image: A comparison illustrating effective cable management with the Perlegear mount, showing neatly secured cables, versus a cluttered appearance with unmanaged cables.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The Perlegear Electric Ceiling TV Mount is operated using the included remote control.

1. നീട്ടുക/പിൻവലിക്കുക: അമർത്തുക UP or താഴേക്ക് buttons on the remote to extend or retract the TV. The mount offers a full expansion in approximately 32 seconds.
2. ടിൽറ്റ് അഡ്ജസ്റ്റ്മെന്റ്: The mount allows for a tilt range of 0° to 75°. Use the remote control to adjust the tilt angle to your preferred viewസ്ഥാനം.
3. Stopping at Any Angle: You can stop the movement at any desired angle by pressing any button on the remote during extension or retraction.
4. Manual Leveling: After installation, if minor leveling adjustments are needed, use the manual ±2° leveling feature on the TV bracket.

Image: The remote control in use, demonstrating its sensitive operation and 33 ft range to adjust the TV's tilt from the ceiling.

മെയിൻ്റനൻസ്

• Regularly check that all screws and connections are tight and secure.
• Clean the mount and TV with a soft, dry cloth. Avoid abrasive cleaners or solvents.
• Do not lubricate the motorized parts unless specifically instructed by Perlegear customer support.
• Ensure cables remain properly managed and do not interfere with moving parts.

ട്രബിൾഷൂട്ടിംഗ്

വാറൻ്റിയും ഉപഭോക്തൃ പിന്തുണയും

Perlegear offers a comprehensive warranty for its products. For specific warranty details, product support, or any questions regarding installation or operation, please contact our U.S.-based product support team. Refer to the product packaging or the official Perlegear webനിലവിലെ ബന്ധപ്പെടാനുള്ള വിവരങ്ങൾക്കായി സൈറ്റ്.

ബന്ധപ്പെടുക: Please refer to the Perlegear official website or your purchase documentation for the most up-to-date customer support contact details.