ആമുഖം
This instruction manual provides essential information for the safe and effective assembly, operation, and maintenance of your SONICAKE QDT-30 Hydraulic Height Adjustable Drum Throne. Please read this manual thoroughly before use and retain it for future reference.
സുരക്ഷാ വിവരങ്ങൾ
മുന്നറിയിപ്പ്:
- Always ensure all components are securely fastened before use. Improper assembly can lead to instability and potential injury.
- Do not exceed the maximum weight capacity of 440 lbs (200 kg). Exceeding this limit may cause damage to the product or personal injury.
- ഉയരം ക്രമീകരിക്കുമ്പോൾ കൈകളും വിരലുകളും ചലിക്കുന്ന ഭാഗങ്ങളിൽ നിന്ന് അകറ്റി നിർത്തുക.
- Use the drum throne on a flat, stable surface to prevent tipping.
- Regularly inspect the drum throne for any signs of wear, damage, or loose components. Discontinue use if any issues are found and contact customer support.
പാക്കേജ് ഉള്ളടക്കം
നിങ്ങളുടെ പാക്കേജിൽ ഇനിപ്പറയുന്ന എല്ലാ ഘടകങ്ങളും ഉൾപ്പെടുത്തിയിട്ടുണ്ടെന്ന് ദയവായി പരിശോധിക്കുക:
- 1x Seat Cushion (with hydraulic lever attached)
- 1x ബാക്ക്റെസ്റ്റ്
- 1x Hydraulic Base/Stand Assembly (with legs and anti-slip feet)
- 2x Backrest Attachment Screws
- 2x വാഷറുകൾ
സജ്ജീകരണവും അസംബ്ലിയും
Follow these steps to assemble your drum throne:
- ഘടകങ്ങൾ അൺപാക്ക് ചെയ്യുക: Carefully remove all parts from the packaging and place them on a clean, flat surface. Refer to the "Package Contents" section to ensure all parts are present.
- സീറ്റിൽ ബാക്ക്റെസ്റ്റ് ഘടിപ്പിക്കുക:
- Locate the mounting bracket on the underside of the seat cushion and the corresponding attachment point on the backrest.
- Align the backrest with the bracket.
- Insert the two backrest attachment screws through the washers and then through the bracket holes into the backrest. Tighten securely by hand. Do not overtighten.
ചിത്രം: ക്ലോസ്-അപ്പ് view of the backrest attachment point on the underside of the seat, showing the screws and mechanism for securing the backrest. - Attach Seat Assembly to Hydraulic Base:
- Place the hydraulic base/stand on a stable surface with the legs fully extended.
- Carefully place the assembled seat (with backrest) onto the top of the hydraulic cylinder of the base. Ensure it is seated firmly and centrally.
- സ്ഥിരത പരിശോധിക്കുക: Gently test the stability of the assembled drum throne before sitting on it. Ensure all connections are tight and the base legs are fully spread.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
ഉയരം ക്രമീകരിക്കൽ
The SONICAKE QDT-30 features a hydraulic mechanism for quick and effortless height adjustment.
- സീറ്റ് ഉയർത്താൻ: While standing, pull the hydraulic lever located under the seat upwards. The seat will automatically rise. Release the lever when the desired height is reached.
- സീറ്റ് താഴ്ത്താൻ: While seated, pull the hydraulic lever upwards. The seat will lower under your body weight. Release the lever when the desired height is reached.
The adjustable height range is approximately 45 cm (17.7 inches) to 60 cm (23.6 inches).
ബാക്ക്റെസ്റ്റ് അഡ്ജസ്റ്റ്മെന്റ്
The backrest can be adjusted for optimal ergonomic support.
- To Adjust Backrest Position: Loosen the backrest attachment screws located on the underside of the seat. Adjust the backrest forwards or backwards to your preferred position. Once adjusted, securely tighten the screws to lock the backrest in place.
- The backrest is designed to conform to the natural curvature of the human body, providing excellent lumbar support.
മെയിൻ്റനൻസ്
- വൃത്തിയാക്കൽ: Wipe the leather fabric seat and backrest with a soft, damp cloth. For stubborn stains, use a mild soap solution and dry thoroughly. Avoid harsh chemicals or abrasive cleaners.
- ഹാർഡ്വെയർ പരിശോധന: Periodically check all screws and bolts, especially those securing the backrest and the seat to the base, to ensure they remain tight. Tighten if necessary.
- ഹൈഡ്രോളിക് സിസ്റ്റം: The hydraulic system is generally maintenance-free. If you notice any issues with height adjustment, ensure the lever is functioning correctly and there are no obstructions.
- ആൻ്റി-സ്ലിപ്പ് അടി: Ensure the anti-slip rubber pads on the base legs are clean and free from debris to maintain optimal grip.
ട്രബിൾഷൂട്ടിംഗ്
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| Seat does not raise or lower smoothly. | Hydraulic lever stuck or obstructed; hydraulic cylinder issue. | Check if the hydraulic lever moves freely. Ensure no obstructions are preventing movement. If the issue persists, contact customer support. |
| Drum throne feels unstable or wobbly. | Loose assembly screws; uneven surface; damaged base. | Ensure all assembly screws (especially backrest and seat-to-base connections) are securely tightened. Verify the drum throne is on a flat, level surface. Inspect the base legs for any damage. |
| Backrest moves or feels loose. | Backrest attachment screws are loose. | Tighten the backrest attachment screws firmly. |
ഉൽപ്പന്ന സവിശേഷതകൾ
- മോഡൽ: QDT-30
- ബ്രാൻഡ്: സോണികേക്ക്
- നിറം: കറുപ്പ്
- ക്രമീകരിക്കാവുന്ന ഉയരം പരിധി: 45 cm - 60 cm (17.7 inches - 23.6 inches)
- ഉൽപ്പന്ന അളവുകൾ: 40 cm (D) x 47 cm (W) x 29 cm (H) (seat dimensions)
- ഭാരം ശേഷി: 200 കിലോഗ്രാം വരെ (440 പ bs ണ്ട്)
- മെറ്റീരിയലുകൾ: Leather fabric (seat/backrest), Stainless Steel (frame/base)
- ഇനത്തിൻ്റെ ഭാരം: 7.7 കി.ഗ്രാം
വാറൻ്റി വിവരങ്ങൾ
Specific warranty details may vary by region and retailer. Please refer to the warranty card included with your product or contact your point of purchase for detailed information regarding warranty coverage and terms.
ഉപഭോക്തൃ പിന്തുണ
If you have any questions, require assistance with assembly, or encounter any issues not covered in this manual, please contact SONICAKE customer support or your authorized retailer. Please have your model number (QDT-30) and purchase information ready when contacting support.
For more information about SONICAKE products, visit the official SONICAKE webസൈറ്റ്.
