ELEGOO സാറ്റേൺ 4 അൾട്രാ സ്മാർട്ട് റെസിൻ 3D പ്രിന്റർ ഇൻസ്ട്രക്ഷൻ മാനുവൽ

1 സുരക്ഷാ വിവരങ്ങൾ

Please read this manual carefully before operating the ELEGOO Saturn 4 Ultra 3D printer. Failure to follow safety guidelines may result in injury or damage to the device.

• Always operate the printer in a well-ventilated area to minimize exposure to resin fumes.
• Wear appropriate personal protective equipment (PPE), including gloves and safety glasses, when handling resin or uncured prints.
• Keep the printer and resin out of reach of children and pets.
• Do not expose resin to direct sunlight or UV light, as this will cause it to cure.
• Ensure the power supply is correctly connected and the voltage നിങ്ങളുടെ പ്രദേശത്തിന്റെ ആവശ്യകതകളുമായി പൊരുത്തപ്പെടുന്നു.
• Avoid touching moving parts of the printer during operation.
• അടിയന്തര സാഹചര്യങ്ങളിൽ, ഉടൻ തന്നെ വൈദ്യുതി വിതരണം വിച്ഛേദിക്കുക.

2. പാക്കേജ് ഉള്ളടക്കം

The ELEGOO Saturn 4 Ultra package includes the following items:

• ELEGOO സാറ്റേൺ 4 അൾട്രാ 3D പ്രിന്റർ
• പ്ലേറ്റ് നിർമ്മിക്കുക
• റെസിൻ വാറ്റ്
• പവർ അഡാപ്റ്റർ
• USB ഡ്രൈവ്
• Scraper (Metal)
• Scraper (Plastic)
• ഹെക്സ് റെഞ്ചുകൾ (വിവിധ വലുപ്പങ്ങൾ)
• Funnel Filters
• ഡിസ്പോസിബിൾ കയ്യുറകൾ
• ഡസ്റ്റ് മാസ്ക്
• ഉപയോക്തൃ മാനുവൽ (ഈ പ്രമാണം)

3. സജ്ജീകരണം

3.1 അൺബോക്സിംഗും പ്രാരംഭ പരിശോധനയും

Carefully remove the printer from its packaging. Inspect all components for any signs of damage during transit. Remove all protective films and packaging materials from the printer.

3.2 ഓട്ടോമാറ്റിക് ലെവലിംഗ്

The ELEGOO Saturn 4 Ultra features an automatic leveling system, eliminating the need for manual calibration. The build plate automatically levels itself when it descends to the LCD screen, ensuring it is ready for immediate use out of the box.

Image: Visual representation of the automatic leveling mechanism in action, showing the build plate adjusting itself.

3.3 Mini Heater Installation

To ensure optimal resin temperature for printing, you may install the optional Mini Heater. Follow these steps:

1. Lift the top cover of the printer.
2. Use a 2.5mm hex key to loosen the four screws at the back of the top cover that secure the filler plate.
3. Remove the filler plate.
4. Take out the mounting bracket of the Mini Heater. Determine the installation orientation based on the button hole and screw holes.
5. Position the mounting bracket on the outer side of the top cover's back.
6. Use a 2.5mm hex key to tighten the two screws securing the mounting bracket from the inside. (Use the two screws that originally secured the filler plate).
7. Take out the Mini Heater. Align the Mini Heater with the button hole and screw holes on the mounting bracket and place it in the installation position.
8. Use a 2.0mm hex key to tighten the two screws securing the Mini Heater.
9. Plug in the Mini Heater's power cord.
10. Turn on the Mini Heater.
11. Ensure the top cover is securely closed for optimal heating performance.

Video: Step-by-step guide on how to install the Mini Heater for the ELEGOO Saturn 4 Ultra 3D printer.

4. പ്രിന്റർ പ്രവർത്തിപ്പിക്കൽ

4.1 Printing Process Overview

The Saturn 4 Ultra incorporates several advanced features to streamline your printing experience:

• Inclined Release Technology: This advanced technology significantly reduces the release force, accelerating printing speeds up to 150 mm/h and increasing success rates.
• AI Camera Monitoring: An integrated AI camera monitors the printing process in real-time, automatically detecting anomalies and capturing time-lapse footage of the entire print.
• Mechanical Sensors: Mechanical sensors evaluate resin levels, alert for material shortages, detect foreign objects, and assist with leveling issues, ensuring a safer and more reliable printing experience.
• പവർ ഓtagഇ വീണ്ടെടുക്കൽ: The printer features a power outage recovery function, allowing you to resume printing after an interruption.
• താപനില സംരക്ഷണം: Printing pauses if the temperature exceeds 80°C until it cools down, protecting the printer and print.
• വൈഫൈ File Transfer & Cluster Printing: Wi-Fi പിന്തുണയ്ക്കുന്നു file transfer at 6-10 Mbps (2.4G and 5G networks) and network control for multiple machines, optimizing productivity.

Image: Diagram illustrating the intelligent mechanical sensors that provide print protection and smart alerts.

Image: Visual of the AI camera system, highlighting its intelligent detection capabilities and time-lapse recording.

Image: Illustration of multiple printers engaged in cluster printing, managed via Wi-Fi for enhanced productivity.

ചിത്രം: ഡൈനാമിക് view of the printer utilizing inclined release technology for rapid resin printing.

5. പരിപാലനം

5.1 ACF Film Replacement

The ACF (Advanced Composite Film) in your resin vat is a consumable part that may need replacement over time due to wear or damage. Follow the instructions in the video below for proper replacement.

Video: Detailed instructions on how to replace the ACF film in an ELEGOO Saturn 3 Ultra resin vat. The process is similar for the Saturn 4 Ultra.

5.2 Cleaning the Printer and Resin Vat

Regular cleaning ensures optimal performance and longevity of your printer. After each print, carefully clean the build plate and resin vat. If using a wash and cure station for post-processing, refer to its specific instructions.

Image: Close-up of the resin vat, flip-up cover, capacitive touch screen, and replaceable resin tank lock, highlighting user-friendly design elements.

വീഡിയോ: കഴിഞ്ഞുview of the ELEGOO Mercury X Bundle Wash and Cure Machine. While not the printer itself, this video demonstrates post-processing steps relevant to resin 3D printing.

6. പ്രശ്‌നപരിഹാരം

If you encounter issues with your ELEGOO Saturn 4 Ultra, consider the following common troubleshooting steps:

• Print Failure: Check resin exposure settings, ensure the build plate is clean and properly leveled, and verify the ACF film is intact.
• ലെയർ ഷിഫ്റ്റിംഗ്: Tighten all screws on the build plate and Z-axis, and ensure the printer is on a stable surface.
• Resin Not Curing: Confirm the UV light source is functioning, check resin expiration date, and ensure proper exposure settings.
• പ്രിന്റർ പ്രതികരിക്കുന്നില്ല: Restart the printer, check all cable connections, and ensure the firmware is up to date.
• AI Camera Alerts: Follow on-screen prompts for detected anomalies. Clean the camera lens if image quality is poor.

For more detailed troubleshooting, refer to the official ELEGOO support resources.

7 സ്പെസിഫിക്കേഷനുകൾ

Key technical specifications for the ELEGOO Saturn 4 Ultra 3D Printer:

Image: The 12K Monochrome LCD screen, highlighting its high resolution for detailed prints.

Image: Diagram illustrating the COB (Chip-on-Board) and Fresnel lens setup, ensuring perfect and uniform light distribution for precise prints.

8. വാറൻ്റിയും പിന്തുണയും

The ELEGOO Saturn 4 Ultra 3D printer comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions. For technical support, troubleshooting assistance, or spare parts, please visit the official ELEGOO webസൈറ്റ് അല്ലെങ്കിൽ അവരുടെ ഉപഭോക്തൃ സേവനവുമായി നേരിട്ട് ബന്ധപ്പെടുക.

നിങ്ങൾക്ക് കൂടുതൽ ഉറവിടങ്ങളും ബന്ധപ്പെടാനുള്ള വിവരങ്ങളും ഇവിടെ കണ്ടെത്താനാകും ELEGOO Brand Store.