1. ആമുഖം
Welcome to the user manual for your new Blukar LED Headlamp. ഈ തലക്കെട്ട്amp is designed for various activities, offering super bright illumination, multiple lighting modes, motion sensor control, and a durable, waterproof design. Please read this manual carefully to ensure proper use and maintenance of your device.

Figure 1: Blukar LED Headlamp 2-pack with charging cables.
2. സജ്ജീകരണം
2.1 അൺപാക്കിംഗ്
Before first use, ensure all components are present:
- ബ്ലൂകാർ എൽഇഡി ഹെഡ്amp (2 യൂണിറ്റുകൾ)
- USB-C Charging Cable (2 units)
2.2 പ്രാരംഭ ചാർജിംഗ്
Your headlamp comes with a built-in 1200mAh rechargeable battery. For optimal performance, fully charge the headlamp ആദ്യ ഉപയോഗത്തിന് മുമ്പ്.
- ഹെഡ്ഫോണിൽ USB-C ചാർജിംഗ് പോർട്ട് കണ്ടെത്തുക.amp.
- നൽകിയിരിക്കുന്ന USB-C കേബിൾ ഹെഡ്ലുമായി ബന്ധിപ്പിക്കുകamp and a compatible USB power source (e.g., AC adapter, power bank, computer USB port).
- The charging indicator light will show charging status (refer to product-specific LED indicator behavior, typically red for charging, green/blue for full).
- ചാർജ് ചെയ്യാൻ സാധാരണയായി ഏകദേശം 2-3 മണിക്കൂർ എടുക്കും.

ചിത്രം 2: ഹെഡ്ൽamp features a built-in 1200mAh rechargeable battery for long-lasting use.

Figure 3: USB-C charging port for convenient and universal recharging.
2.3 ഹെഡ്ബാൻഡ് ക്രമീകരിക്കൽ
The elastic headband is adjustable to fit various head sizes comfortably and securely.
- തലയിടുകamp നിങ്ങളുടെ തലയിൽ.
- Adjust the elastic strap using the buckle until it feels snug but not too tight.
- തലക്കെട്ട്amp unit can be tilted up to 45 degrees to direct light where needed.

Figure 4: Adjustable elastic headband for a comfortable and secure fit during activities.
3. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
3.1 പവർ ഓൺ/ഓഫ്
തല തിരിക്കാൻamp on or off, press the main power button located on the top of the unit.
3.2 ലൈറ്റിംഗ് മോഡുകൾ
The Blukar LED Headlamp features 8 distinct lighting modes, including 5 normal modes and 3 sensor modes. Press the main power button to cycle through the normal modes:
- XPG White Light (Spotlight): Provides a focused beam for long-distance illumination.
- COB White Light (Floodlight): Offers a wide, even spread of light for close-range tasks.
- XPG + COB White Light (Spotlight + Floodlight): Combines both lights for maximum brightness and coverage.
- COB Red Light (Red Floodlight): Ideal for preserving night vision and signaling.
- COB Red Light SOS (Red Strobe): A flashing red light for emergency signaling.
In any of these 5 normal modes, a short press of the switch button will turn off the light directly.

Figure 5: Visual representation of the 8 lighting modes available on the headlamp.
3.3 Dimmable Brightness
For adjustable brightness, use the continuous dimming function:
- While in any white light mode, long press the main power button.
- The brightness will cycle from 100% down to 30% and back up. Release the button at your desired brightness level.

Figure 6: Long press the power button to adjust brightness from 100% to 30%.
3.4 Motion Sensor Function
തലക്കെട്ട്amp features a motion sensor for hands-free operation. Press the dedicated sensor button (often marked with a wave icon) to activate sensor mode. The indicator light will typically turn blue to confirm activation.
- സെൻസർ മോഡുകൾ: XPG white light, COB white light, XPG+COB white light. Cycle through these by short pressing the main power button while in sensor mode.
- സജീവമാക്കുക/നിർജ്ജീവമാക്കുക: In sensor mode, wave your hand within 15 cm (approximately 6 inches) in front of the headlamp ലൈറ്റ് ഓണാക്കാനോ ഓഫാക്കാനോ.

Figure 7: Wave your hand within 15 cm to control the headlamp in sensor mode.
Video 1: Demonstration of Blukar LED Headlamp features, including motion sensor and various lighting modes.
വീഡിയോ 2: കഴിഞ്ഞുview of the Blukar LED Headlamp's functionality and bright illumination.
4. പരിപാലനം
4.1 വൃത്തിയാക്കൽ
- തല തുടയ്ക്കുകamp മൃദുവായ, ഡി ഉള്ള ശരീരംamp തുണി. ഉരച്ചിലുകളുള്ള ക്ലീനറുകളോ ലായകങ്ങളോ ഉപയോഗിക്കരുത്.
- The elastic headband is detachable and washable. Hand wash with mild soap and water, then air dry.
4.2 സംഭരണം
- തലക്കെട്ട് സൂക്ഷിക്കുകamp നേരിട്ടുള്ള സൂര്യപ്രകാശത്തിൽ നിന്നും തീവ്ര താപനിലയിൽ നിന്നും അകലെ തണുത്തതും വരണ്ടതുമായ സ്ഥലത്ത്.
- If storing for an extended period, charge the battery every 3-6 months to maintain battery health.
4.3 ബാറ്ററി കെയർ
- ബാറ്ററി ഇടയ്ക്കിടെ പൂർണ്ണമായും ഡിസ്ചാർജ് ചെയ്യുന്നത് ഒഴിവാക്കുക.
- ചാർജ് ചെയ്യുന്നതിന് നൽകിയിരിക്കുന്ന USB-C കേബിളോ സാക്ഷ്യപ്പെടുത്തിയ തത്തുല്യമായതോ മാത്രം ഉപയോഗിക്കുക.
5. പ്രശ്നപരിഹാരം
| ഇഷ്യൂ | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| ഹെഡ്amp ഓണാക്കുന്നില്ല. | കുറഞ്ഞതോ തീർന്നതോ ആയ ബാറ്ററി. | തലക്കെട്ട് ചാർജ് ചെയ്യുകamp നൽകിയിരിക്കുന്ന USB-C കേബിൾ പൂർണ്ണമായും ഉപയോഗിക്കുന്നു. |
| Light flickers or turns off unexpectedly in sensor mode. | Accidental activation/deactivation of motion sensor. | Press the main power button to exit sensor mode and use normal lighting modes. |
| തെളിച്ചം വളരെ കുറവാണ്. | Battery is low or brightness is dimmed. | Recharge the battery. Long press the power button to adjust brightness to 100%. |
| ഹെഡ്amp ചാര്ജ്ജ് ആകുന്നില്ല. | കേബിളിലോ പവർ സ്രോതസ്സിലോ തകരാറ്. | Try a different USB-C cable or power adapter. Ensure connections are secure. |
6 സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| ബ്രാൻഡ് | ബ്ലൂക്കാർ |
| മോഡൽ | K9125 |
| പ്രകാശ സ്രോതസ്സ് തരം | LED (XPG & COB) |
| വെളുത്ത തെളിച്ചം | 2000 ല്യൂമെൻസ് |
| ബാറ്ററി ശേഷി | 1200mAh ലിഥിയം പോളിമർ |
| പവർ ഉറവിടം | ബാറ്ററി പവർ (USB-C റീചാർജ് ചെയ്യാവുന്നത്) |
| പ്രവർത്തനസമയം | 20 മണിക്കൂർ വരെ |
| ജല പ്രതിരോധം | IPX5 വാട്ടർപ്രൂഫ് |
| പ്രത്യേക സവിശേഷതകൾ | Super Bright, Sensor Control, Spotlight & Floodlight, 8 Lighting Modes, Dimmable Brightness, Ultra-Light & Comfortable |
| മെറ്റീരിയൽ | എബിഎസ് |
| ഉൽപ്പന്ന അളവുകൾ | 2.44"D x 1.72"W x 1.4"H |
| ഇനത്തിൻ്റെ ഭാരം | 172 ഗ്രാം (6.1 ഔൺസ്) |
7. വാറൻ്റിയും പിന്തുണയും
Blukar products are manufactured to high-quality standards. For information regarding warranty coverage, returns, or technical support, please refer to the product packaging or contact Blukar customer service directly through the retailer where the product was purchased.
For further assistance, please visit the official Blukar store or contact their support team.





