SingularXYZ E1 RTK GNSS സർവേ ഉപകരണ ഉപയോക്തൃ മാനുവൽ

1. ആമുഖം

The SingularXYZ E1 RTK GNSS Survey Equipment is a high-precision positioning system designed for land surveying, navigation, and various geospatial applications. This manual provides detailed instructions for setting up, operating, and maintaining your E1 system to ensure optimal performance and longevity.

1.1 ബോക്സിൽ എന്താണുള്ളത്

The E1 RTK GNSS Survey Equipment package includes the following components:

• E1 GNSS Receiver (x2)
• Transport Case (x2)
• USB-Type C Cable (x2)
• Super Charger (x2)
• ദ്രുത ആരംഭ ഗൈഡ് (x1)
• Quick Start Card (x1)
• SC200 Data Collector (x1)
• USB cable (for SC200) (x1)
• Super Charger (for SC200) (x1)
• ബ്രാക്കറ്റ് (x1)
• SingularPad Software (x1)
• Whip Antenna (x2)
• Tape Measure (x1)
• 20 cm extension rod plugged on tribrach (x1)
• Tribrach (x1)

ചിത്രം 1.1: ഓവർview of the E1 RTK GNSS Survey Equipment and its main components.

Figure 1.2: Detailed breakdown of the E1 Base and Rover components, including adapters, software, and data collector.

2. ഉൽപ്പന്ന സവിശേഷതകൾ

The E1 RTK GNSS Survey Equipment is engineered with advanced features to provide reliable and accurate surveying capabilities:

• ഉയർന്ന കൃത്യത: Achieves centimeter-level precision measurement with low power consumption.
• IMU Integration: Supports tilt measurements up to 60° with quick initialization (5 seconds).
• വിപുലീകരിച്ച ശ്രേണി: Radio range between rover and base can reach up to 5 kilometers (3.1 miles).
• Full-Constellation Tracking: Supports GPS, GLONASS, Galileo, BDS, QZSS, IRNSS, SBAS for robust signal acquisition in challenging environments.
• ബഹുമുഖ കണക്റ്റിവിറ്റി: Features NFC (Touch connection), Bluetooth, USB Type-C, WiFi, TNC Connector, and RS232 Serial Port.
• Long Endurance: 6700mAh battery provides over 20 hours of continuous operation.
• മോടിയുള്ള ഡിസൈൻ: IP68 rated for waterproof and dustproof protection.

Figure 2.1: Key features of the E1 receiver, including NFC one-touch connection, compact size, easy data download via Web UI, and fast charging capabilities.

ചിത്രം 2.2: വിശദമായി view of the E1 receiver's front panel indicators (Satellite Tracking, Static & Network, Correction Data, Power) and various interfaces (NFC, Type-C, TNC, RS232).

Figure 2.3: Information on the SC200 Data Collector, highlighting its Android OS, processor, RAM, storage, sunlight-readable screen, and integrated connectivity.

Figure 2.4: The E1's Web UI allows for easy static data download, firmware upgrades, and configuration via WiFi.

Figure 2.5: A comparative overview of the E1's specifications against typical industry alternatives, highlighting its advantages in channels, trans-range, IMU, battery life, and material protection.

3. സജ്ജീകരണം

3.1 ഉപകരണ കണക്ഷൻ

Connecting your GNSS device to the SingularPad software is crucial for operation. Follow these steps:

1. Turn on your GNSS device.
2. On the data collector, navigate to Device >> Communication.
3. Select the appropriate device manufacturer and type (e.g., SingularXYZ >> RTK >> Bluetooth for SingularXYZ RTK Receivers, or Other >> RTK(NMEA0183) >> Bluetooth for other brands, or Other >> Internal GPS for SingularXYZ GNSS Tablets).
4. ഇതിനായി തിരയുക your device's serial number (SN) and connect.
5. After connection, you can view current device information by going to Device >> Device Information.

3.2 പ്രവർത്തന രീതികൾ

The E1 system supports two primary working modes:

• Base + Rover (Radio/UHF): This mode is compatible with base stations from other brands and is not subject to network and regional restrictions.
• Rover + CORS (NTRIP): This mode requires a CORS account (purchased from your local CORS provider) and a network signal.

Figure 3.1: Illustration of the two main working modes for the E1 RTK GNSS system: Base + Rover using radio/UHF and Rover + CORS using NTRIP.

4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

4.1 SingularPad Software Usage

The SingularPad software provides a comprehensive interface for managing projects, collecting data, and performing various surveying tasks. It offers features like project management, coordinate system settings, point database, and various survey methods.

Figure 4.1: The SingularPad software interface, designed for ease of use with functions like one-click fixation, road stakeout, and power line survey.

Figure 4.2: A flowchart illustrating the quick start workflow for E1 surveying, from creating a new project to exporting data.

4.2 Tilt Surveying

The E1 system features IMU technology allowing for tilt surveying up to 60 degrees with high accuracy and fast initialization.

Figure 4.3: The E1's capability for tilt surveying, showing measurements at various angles up to 60 degrees with 1cm accuracy and 5-second fast initialization.

Figure 4.4: The E1 system's ability to measure with up to 60° tilt, providing ±2.5cm accuracy for tilt surveying.

4.3 Working with E1 Rover + Base

To configure the E1 system for Rover + Base operation:

• Ensure you have two E1 GNSS receivers, designating one as the base and the other as the rover.
• Connect them separately to your PDA device via Bluetooth.
• Place both your E1 base and rover in an open view ആകാശത്തിൻ്റെ.
• Connect the whip antenna to both E1 base and rover.

അടിസ്ഥാനം സജ്ജമാക്കുന്നു:

1. Connect E1 base to your PDA, go to Device >> Base.
2. വേണ്ടി Base Startup Mode, you can input known point coordinates to setup, or select സിംഗിൾ പോയിന്റ് mode for automatic setup.
3. സജ്ജമാക്കുക ഡാറ്റാലിങ്ക് as Internal Radio, and customize radio channels, frequency, and protocol according to your needs.
4. Save settings and Start Base. The status bar will become Base.

Setting up the Rover:

1. Connect E1 base to your PDA and connect to the rover in the software.
2. പോകുക Device >> Rover, set Data Link as Internal Radio.
3. Match and set the same protocol and frequency as the base setting.
4. ക്ലിക്ക് ചെയ്യുക ശേഖരണം to save settings and click അപേക്ഷിക്കുക.

Figure 4.5: Step-by-step guide for setting up the E1 as a Rover and Base, including software interface screenshots for configuration.

4.4 Working with CORS/RTK Correction Service

To use the E1 system with a CORS/RTK Correction Service:

• Purchase a CORS/RTK Correction Service account in your local area.
• Ensure your PDA device (phone/tablet/data collector) can access network and support Bluetooth connection.
• Place your E1 GNSS receiver in an open view ആകാശത്തിൻ്റെ.

ഘട്ടങ്ങൾ:

1. Open SingularPad software.
2. Click "Communication" and connect to your E1 receiver's SN via Bluetooth.
3. Click "Rover" >> Set Data Link as Phone Internet, then go to കണക്റ്റ് മോഡ് and fill in your CORS/RTK Correction Service account details.
4. ക്ലിക്ക് ചെയ്യുക നേടുക to obtain MountPoint list and select appropriate one. Click ആരംഭിക്കുക ഒപ്പം അപേക്ഷിക്കുക.

Note: Find the appropriate mount point via the website of your local CORS/RTK Correction Service provider. Ensure the baseline is within 50km. Be noted that the long baseline will affect the RTK performance and measuring accuracy.

Figure 4.6: Guide for configuring the E1 system to work with a CORS/RTK Correction Service, including software interface screenshots for connection and settings.

5. പരിപാലനം

5.1 ബാറ്ററിയും ചാർജിംഗും

The E1 RTK GNSS receiver is equipped with a 6700mAh battery, providing over 20 hours of continuous operation. It supports fast charging via its Type-C port.

• ചാർജിംഗ് സമയം: പൂർണ്ണമായി ചാർജ് ചെയ്യാൻ ഏകദേശം 3.5-4 മണിക്കൂർ.
• പ്രവർത്തന സമയം: Over 20 hours on a single charge.

Figure 5.1: Information on the E1's battery performance, indicating 3.5-4 hours for fast charging and over 20 hours of continuous working time.

5.2 വൃത്തിയാക്കലും സംഭരണവും

To maintain the device's performance and extend its lifespan:

• ഒരു സോഫ്റ്റ്, ഡി ഉപയോഗിച്ച് ഉപകരണം പതിവായി വൃത്തിയാക്കുകamp തുണി. കഠിനമായ രാസവസ്തുക്കൾ ഒഴിവാക്കുക.
• എല്ലാ തുറമുഖങ്ങളും പൊടിയും അവശിഷ്ടങ്ങളും ഇല്ലാത്തതാണെന്ന് ഉറപ്പാക്കുക.
• Store the equipment in its transport case in a dry, cool place when not in use.
• The E1 is IP68 waterproof and dustproof, but avoid prolonged submersion or exposure to extreme conditions.

6. പ്രശ്‌നപരിഹാരം

This section addresses common issues you might encounter with your E1 RTK GNSS Survey Equipment. For more complex problems, please refer to the support section.

6.1 പൊതുവായ പ്രശ്നങ്ങളും പരിഹാരങ്ങളും

7 സ്പെസിഫിക്കേഷനുകൾ

Detailed technical specifications for the SingularXYZ E1 RTK GNSS Survey Equipment:

8. വാറൻ്റിയും പിന്തുണയും

SingularXYZ is committed to providing excellent customer service and support for your E1 RTK GNSS Survey Equipment.

8.1 വാറൻ്റി വിവരങ്ങൾ

The E1 RTK GNSS Survey Equipment comes with a ഒരു വർഷത്തെ വാറൻ്റി വാങ്ങിയ തീയതി മുതൽ.

8.2 സാങ്കേതിക പിന്തുണ

SingularXYZ offers ആജീവനാന്ത സാങ്കേതിക പിന്തുണ for the E1 system. Our skilled and professional after-sales team is available to help you resolve any issues promptly and effectively. We provide complete user manuals and video tutorials to assist you in getting started and troubleshooting.

Figure 8.1: The SingularXYZ after-sales technical support team, dedicated to providing professional assistance.

For support, please visit the official SingularXYZ website or contact our customer service team through the provided channels in your product documentation.