SingularXYZ E1 Lite GNSS RTK സർവേയിംഗ് ഉപകരണ ഉപയോക്തൃ മാനുവൽ

1. ആമുഖം

This user manual provides comprehensive instructions for the setup, operation, and maintenance of your SingularXYZ E1 Lite GNSS RTK Surveying Equipment. Designed for high-precision satellite positioning, this system offers centimeter-level accuracy for various surveying applications. Please read this manual thoroughly before using the equipment to ensure optimal performance and safety.

2. എന്താണ് ഉൾപ്പെടുത്തിയിരിക്കുന്നത്

Upon opening the transport case, verify that all components are present:

• E1 Lite GNSS Receiver (x2)
• Transport Case (x2)
• USB-Type C Cable (x2)
• Super Charger (x2)
• SingularPad Software (x1)
• SC200 Data Collector (x1)
• USB കേബിൾ (x1)
• Super Charger (x1)
• ബ്രാക്കറ്റ് (x1)
• ദ്രുത ആരംഭ ഗൈഡ് (x1)
• Quick Start Card (x1)
• Whip Antenna (x2)
• Tape Measure (x1)
• 20 cm extension rod plugged on tribrach (x1)

Figure 2.1: E1 Lite GNSS RTK Surveying Equipment components.

Figure 2.2: Product packaging and contents.

പ്രത്യേക കുറിപ്പ്: Poles, tripods, and tribrachs are not included with this product and must be acquired separately if needed for your surveying tasks.

3. സജ്ജീകരണവും പ്രാരംഭ കണക്ഷനും

3.1 ഉപകരണങ്ങൾ ചാർജ് ചെയ്യുന്നു

The E1 Lite RTK handheld GPS provides over 20 hours of continuous operation on a single charge. Use the provided Type-C chargers to fully charge both the E1 Lite GNSS Receivers and the SC200 Data Collector before initial use. Fast charging is supported.

3.2 ഉപകരണം കഴിഞ്ഞുview and Interfaces

Familiarize yourself with the device's front panel indicators and various connection interfaces:

Figure 3.1: Front Panel and Interfaces of the E1 Lite GNSS Receiver.

• ഫ്രണ്ട് പാനൽ: Satellite Tracking Indicator, Static & Network Indicator, Power Indicator, Function Button.
• ഇൻ്റർഫേസുകൾ: NFC (Touch connection), Bluetooth, USB Type-C (for charging and data download), WiFi, TNC Connector (for UHF Antenna), RS232 Serial Port.

3.3 Connecting Devices via SingularPad Software

The SingularPad software is essential for controlling and configuring your E1 Lite GNSS RTK equipment. Follow these steps to connect your devices:

പൊതുവായ കണക്ഷൻ ഘട്ടങ്ങൾ:

1. Turn on your GNSS device.
2. On the SC200 Data Collector, open the SingularPad software.
3. നാവിഗേറ്റ് ചെയ്യുക Device >> Communication നിങ്ങളുടെ ഉപകരണം ബന്ധിപ്പിക്കുന്നതിന്.
4. For SingularXYZ RTK Receivers (e.g., Y1 GNSS receiver): Select SingularXYZ >> RTK >> Bluetooth. ഇതിനായി തിരയുക your device's Serial Number (SN) and connect.
5. For GNSS NMEA Devices (other brands): Select Other >> RTK(NMEA0183) >> Bluetooth. Search and connect the device.
6. For SingularXYZ GNSS Tablets (e.g., T8 Pro GNSS tablet): Select Other >> Internal GPS >> Internal GPS and connect the device.
7. After successful connection, you can go to Device >> Device Information വരെ view current device information.

Figure 3.2: Setting up Rover and Base units in SingularPad.

Setting up Rover and Base (for Base + Rover mode):

1. Ensure you have two E1 Lite GNSS receivers. Designate one as the base and the other as the rover.
2. Connect both to your PDA device via Bluetooth.
3. Place both your E1 Lite base and rover in an open view ആകാശത്തിൻ്റെ.
4. Connect the whip antenna to both E1 Lite base and rover.
5. അടിസ്ഥാനം സജ്ജമാക്കുന്നു: Connect E1 Lite base to your PDA, go to Device >> Base. വേണ്ടി Base Startup Mode, you can input known point coordinates or select സിംഗിൾ പോയിന്റ് mode for automatic setup. Set ഡാറ്റാലിങ്ക് as Internal Radio, and customize radio channels, frequency, and protocol. Save settings and Start Base.
6. Setting up the Rover: Disconnect E1 Lite base and connect to the rover in the software. Go to Device >> Rover, സെറ്റ് ഡാറ്റ ലിങ്ക് as Internal Radio. Match and set the same protocol and frequency as the base setting. Click ശേഖരണം to save settings and click അപേക്ഷിക്കുക.

4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

4.1 പ്രവർത്തന രീതികൾ

The E1 Lite GNSS RTK system supports two primary working modes:

• Base + Rover Mode: Provides millimeter-level positioning. Compatible with base stations of other brands. Not subject to network and regional restrictions.
• Rover + CORS Mode: Provides centimeter-level positioning. Requires a network signal. CORS account is not included and must be purchased from your local CORS provider.

Figure 4.1: E1 Lite Working Modes.

4.2 Working with CORS/RTK Correction Service

To utilize the CORS/RTK correction service, ensure you have purchased a CORS/RTK Correction Service account in your local area. Your PDA device (phone/tablet/data collector) must have network access and support Bluetooth connection. Place your E1 Lite GNSS receiver in an open view ആകാശത്തിൻ്റെ.

1. Open SingularPad software.
2. ക്ലിക്ക് ചെയ്യുക "Communication" and connect to your E1 Lite receiver's SN via Bluetooth.
3. ക്ലിക്ക് ചെയ്യുക നേടുക to obtain Mount-Point list and select appropriate one. Click ആരംഭിക്കുക ഒപ്പം അപേക്ഷിക്കുക.
4. ക്ലിക്ക് ചെയ്യുക "Rover". സജ്ജമാക്കുക ഡാറ്റ ലിങ്ക് as Phone Internet. Then go to കണക്റ്റ് മോഡ് and fill in your CORS/RTK Correction Service account details.

Figure 4.2: Connecting to CORS/RTK Correction Service.

4.3 Viewing RTK Positioning Status

After completing your E1 Lite RTK setup, check the current RTK solution status in the upper left corner of the SingularPad software:

• സ്ഥിരമായത്: E1 Lite is receiving corrections stably and obtaining a Fixed RTK solution with centimeter-level accuracy. Typically, E1 Lite achieves a Fixed RTK solution in a few seconds under good environments.
• ഫ്ലോട്ട്: E1 Lite receives corrections from the base/CORS, but due to obstructions or magnetic field interference, the signal reception is not very stable and the accuracy is sub-meter level. In tougher conditions, it may take a bit longer to achieve FIXED status.
• സ്വയംഭരണാധികാരം: Single-point satellite positioning without receiving RTK correction data. The accuracy is around meter-level.

Figure 4.3: RTK Positioning Status Indicators.

നുറുങ്ങ്: Before surveying, make sure E1 Lite has a clear sky, free from obstacles like buildings, trees, cars, and more.

4.4 വിപുലമായ സവിശേഷതകൾ

• 60° Tilt Surveying: The E1 Lite GNSS Surveying System with IMU initializes in 5 seconds and supports tilt measurements up to 60°, compatible with regular 5/8" thread poles. This allows for surveying in challenging locations without needing perfect vertical alignment.
• 5 Kilometers UHF Range: The radio range between the rover and the base can reach 5 kilometers (3.1 miles). The E1 Lite is compatible with base stations of other brands in both Radio and CORS mode and supports RTCM v3/CMR correction data transmission.
• Robust Signal Tracking: Supports Full-Constellation Tracking (GPS/GLONASS/Galileo/BDS/QZSS/IRNSS/SBAS etc.), allowing for fixed RTK solutions in seconds even in challenging environments like multipath, trees, and city canyons.
• Easy Data Download via Web UI: Access E1's WiFi to conduct static data download, firmware upgrade, and configuration via its web പേജ്.

Figure 4.4: Advanced IMU Tilt Measurement in action.

Figure 4.5: Superior Performance in Challenging Environments.

Figure 4.6: Easy Data Download via Web യുഐ.

5. പരിപാലനം

The E1 Lite GNSS RTK equipment is designed for durability and reliability in harsh environments. It features an IP68 റേറ്റിംഗ്, making it waterproof, dustproof, and shock-resistant.

• ഒരു സോഫ്റ്റ്, ഡി ഉപയോഗിച്ച് ഉപകരണം പതിവായി വൃത്തിയാക്കുകamp തുണി. ഉരച്ചിലുകൾ ഉള്ള ക്ലീനറുകൾ ഒഴിവാക്കുക.
• Ensure all ports (Type-C, TNC) are free from debris and properly sealed when not in use.
• Store the equipment in its transport case when not in use to protect it from physical damage and environmental factors.
• Periodically check cables and connectors for wear and tear. Replace if damaged.

Figure 5.1: E1 Lite's Rugged Design and Battery Life.

6. പ്രശ്‌നപരിഹാരം

If you encounter issues with your E1 Lite GNSS RTK Surveying Equipment, consider the following common points:

• കണക്ഷൻ പ്രശ്നങ്ങൾ: Ensure Bluetooth is enabled on both the data collector and the receiver. Verify that the correct device type and manufacturer are selected in the SingularPad software. Try restarting both devices.
• Poor Accuracy/No Fixed Solution:
  • Ensure the receiver has a clear view of the sky, free from obstructions like buildings, dense trees, or large metal objects.
  • Check the status indicator on the device and in the SingularPad software (refer to Section 4.3).
  • Verify that the base station (if in Base+Rover mode) or CORS service (if in Rover+CORS mode) is active and providing corrections.
  • Confirm that the radio frequency and protocol settings match between the base and rover units.
• ബാറ്ററി ലൈഫ്: Ensure devices are fully charged before use. Check the battery indicator in the SingularPad software.
• സോഫ്റ്റ്‌വെയർ പ്രശ്നങ്ങൾ: Ensure your SingularPad software is up to date. Refer to the software's help section or online tutorials for specific software-related problems.

For persistent issues or problems not covered here, please contact SingularXYZ customer support for assistance. Refer to the "Support" section for contact details.

7 സ്പെസിഫിക്കേഷനുകൾ

Figure 7.1: E1 Lite RTK Key Specifications.

Figure 7.2: Lightweight and Portable Design.

8. വാറൻ്റി

The SingularXYZ E1 Lite GNSS RTK Surveying Equipment comes with a ഒരു വർഷത്തെ വാറൻ്റി from the date of purchase. This warranty covers manufacturing defects and ensures the product meets its specified performance standards. Please retain your proof of purchase for warranty claims.

9 പിന്തുണയും വിഭവങ്ങളും

SingularXYZ is committed to providing excellent customer support. For any inquiries, technical assistance, or service requests, please utilize the following resources:

• 1-On-1 Support Service: Direct technical support is available to assist you with any operational or technical challenges.
• ഉപയോക്തൃ മാനുവൽ (PDF): ഉപയോക്തൃ മാനുവലിന്റെ സമഗ്രമായ ഒരു PDF പതിപ്പ് ഡൗൺലോഡ് ചെയ്യാൻ ലഭ്യമാണ്. PDF ഉപയോക്തൃ മാനുവൽ ഡൗൺലോഡ് ചെയ്യുക
• വീഡിയോ ട്യൂട്ടോറിയലുകൾ: Access a library of video tutorials to help you get started and master various functions of your equipment.
• സോഫ്റ്റ്‌വെയർ അപ്‌ഗ്രേഡുകൾ: Enjoy permanent free software upgrades and update services for the SingularPad and Post-processing Software.
• FCC Radio License Note: U.S. users must apply for an FCC radio license for commercial use (e.g., surveying, construction) with the UHF function (450–470 MHz). The device is FCC certified, and supporting information can be provided if needed.

For direct contact, please visit the official SingularXYZ webസൈറ്റ് അല്ലെങ്കിൽ നിങ്ങളുടെ ഉൽപ്പന്ന ഡോക്യുമെന്റേഷനോടൊപ്പം നൽകിയിരിക്കുന്ന കോൺടാക്റ്റ് വിവരങ്ങൾ റഫർ ചെയ്യുക.