FITNATE ഫിംഗർപ്രിന്റ് ഡോർ ലോക്ക് ഉപയോക്തൃ മാനുവൽ

1. ആമുഖം

Thank you for choosing the FITNATE Fingerprint Door Lock. This smart door knob combines classic design with advanced biometric technology, offering convenient and secure access to your spaces. It features dual unlocking methods: fingerprint recognition and a traditional mechanical key. This manual provides detailed instructions for installation, operation, and maintenance to ensure optimal performance and security.

Figure 1: FITNATE Fingerprint Door Lock

2. പാക്കേജ് ഉള്ളടക്കം

Please verify that all components are present and in good condition before proceeding with installation.

• Fingerprint Door Knob (Exterior and Interior parts)
• ലാച്ച് മെക്കാനിസം
• സ്ട്രൈക്ക് പ്ലേറ്റ്
• സ്ട്രൈക്ക് ബോക്സ്
• Mechanical Keys (x2)
• മൗണ്ടിംഗ് സ്ക്രൂകൾ
• ഇൻസ്റ്റാളേഷൻ ടെംപ്ലേറ്റ്
• ഉപയോക്തൃ മാനുവൽ (ഈ പ്രമാണം)
• Small Pin (for settings button)

3. ഉൽപ്പന്നം കഴിഞ്ഞുview

Familiarize yourself with the main components of your FITNATE Fingerprint Door Lock.

ചിത്രം 2: പൊട്ടിത്തെറിച്ചു view of the door lock components.

• എക്സ്റ്റീരിയർ നോബ്: Features the fingerprint collector, keyhole, and USB-C emergency charging port.
• ഇന്റീരിയർ നോബ്: Contains the battery compartment, settings button, and privacy/passage mode switch.
• ലാച്ച്: The mechanism that extends into the door frame to secure the door.

4. ഇൻസ്റ്റാളേഷൻ ഗൈഡ്

This section provides step-by-step instructions for installing your new fingerprint door lock. A screwdriver is the only tool required for most installations.

4.1 പ്രീ-ഇൻസ്റ്റലേഷൻ പരിശോധനകൾ

ഇൻസ്റ്റാളേഷൻ ആരംഭിക്കുന്നതിന് മുമ്പ്, നിങ്ങളുടെ വാതിൽ ഇനിപ്പറയുന്ന സ്പെസിഫിക്കേഷനുകൾ പാലിക്കുന്നുണ്ടെന്ന് ഉറപ്പാക്കുക:

• വാതിൽ കനം: 1-3/8" മുതൽ 2-1/8" വരെ (35 മിമി മുതൽ 54 മിമി വരെ)
• ഡോർ ഹോൾ വ്യാസം: 2-1/8" (54 മിമി)
• ബാക്ക്‌സെറ്റ്: 2-3/8" (60mm) അല്ലെങ്കിൽ 2-3/4" (70mm) എന്നിവയ്ക്ക് ക്രമീകരിക്കാവുന്നത്
• Latch Hole Diameter: 1" (25 മിമി)

Figure 3: Door Measurement Guide. Not suitable for glass doors or doors with special designs.

4.2 ഘട്ടം ഘട്ടമായുള്ള ഇൻസ്റ്റാളേഷൻ

Follow these steps carefully for a successful installation:

1. ലോക്ക് തയ്യാറാക്കുക: Before installing, remove the battery cover and the interior knob from the main assembly. Then, remove the latch mechanism.
2. ലാച്ച് ഇൻസ്റ്റാൾ ചെയ്യുക: Insert the latch into the door hole, ensuring it is oriented correctly. Secure it with the provided screws.
3. എക്സ്റ്റീരിയർ നോബ് ഇൻസ്റ്റാൾ ചെയ്യുക: With the fingerprint collector facing up, insert the exterior knob into the lock cylinder, aligning the internal components with the latch.
4. ഇന്റീരിയർ നോബ് ഇൻസ്റ്റാൾ ചെയ്യുക: Pass the power cord through the rear door handle. Secure the interior knob to the exterior knob using the long screws.
5. Install Battery Slot: Attach the battery slot cover.
6. ബാറ്ററികൾ ചേർക്കുക: Install 4 x LR3/AAA/1.5V alkaline batteries, strictly observing the positive (+) and negative (-) poles. Batteries are not included.
7. മുകളിലെ കവർ ഘടിപ്പിക്കുക: Align the protruding notch on the door lock cover with the recessed notch on the handle and secure it.

Figure 4: Visual guide for easy installation.

4.3 ഇൻസ്റ്റലേഷൻ വീഡിയോ

For a visual step-by-step guide, please refer to the official installation video below:

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

5.1 Setting Up Administrator Fingerprint

The first fingerprint registered will be the administrator. The administrator has full control over the lock's settings and can add or remove other users.

1. Turn the interior knob to the ഓഫ് position (Privacy Mode).
2. Press the settings button (small hole on the interior knob) once with the provided pin.
3. Place your finger on the fingerprint collector. The indicator light will illuminate.
4. Collect six fingerprints from different directions with the same finger. The light will change color or beep to indicate successful registration.

5.2 Adding User Fingerprints

After an administrator is set up, other users can be added. The lock can store up to 50 fingerprints (2 administrators, 48 users).

1. Turn the interior knob to the ഓഫ് position (Privacy Mode).
2. Press the settings button once with the provided pin.
3. The administrator must first verify their fingerprint once.
4. Then, the new user should place their finger on the fingerprint collector and collect six fingerprints from different directions with the same finger.

5.3 അൺലോക്ക് രീതികൾ

Figure 5: Fingerprint Unlock - Fast identification in less than 0.1 seconds.

• ഫിംഗർപ്രിന്റ് അൺലോക്ക്: Place a registered finger on the fingerprint collector. The lock will unlock instantly.
• മെക്കാനിക്കൽ കീ അൺലോക്ക്: In case of battery depletion or malfunction, insert the mechanical key into the keyhole and turn it clockwise to open the lock. Each lock comes with 2 backup keys.

Figure 6: Mechanical Key Unlocking for emergency access.

5.4 Privacy Mode (Back Locking Function)

When Privacy Mode is activated, only administrators can unlock the door from the outside. Ordinary users cannot unlock it, increasing security performance.

• To activate: Rotate the thumb turn on the interior knob to the ഓഫ് സ്ഥാനം.
• To deactivate: An administrator's fingerprint can unlock it, or rotate the thumb turn to the ON സ്ഥാനം.

Figure 7: Privacy Mode (OFF) ensures only administrators can unlock from outside.

5.5 പാസേജ് മോഡ്

In Passage Mode, the door remains unlocked, allowing free entry and exit without fingerprint verification. Use with caution.

• To activate: The administrator's fingerprint does not move on the collector. The indicator light of the fingerprint collector lights up pink and emits 10 beeps, indicating the passage mode is turned on.
• To deactivate: Administrators and users can close the passage mode by pressing the collector with their fingerprints and hearing 10 beeps. The door lock will then return to its normal state.

Figure 8: Passage Mode (ON) allows free access.

5.6 സൈലൻ്റ് മോഡ്

To enable or disable sound feedback from the lock:

• Rotate the interior knob 5 times continuously to activate the silent mode.
• Rotate it 5 times again to turn the sound back on.

5.7 ഓട്ടോ-ലോക്ക് ഫംഗ്ഷൻ

The lock features a 5-second auto-lock function to ensure your home's security after entry or exit.

5.8 അടിയന്തര വൈദ്യുതി

In case the batteries run out, the lock is equipped with a USB-C port for emergency charging. Connect a power bank to temporarily power the lock and gain access.

Figure 9: USB-C port for emergency power.

5.9 ഫാക്ടറി ക്രമീകരണങ്ങൾ പുനഃസ്ഥാപിക്കുക

To reset the lock to its factory default settings (erasing all registered fingerprints):

• Turn the interior knob to the ഓഫ് സ്ഥാനം.
• Press and hold the settings button with a toothpick or the provided pin for 10 seconds. The lock will indicate a successful reset.

5.10 സവിശേഷതകൾ കഴിഞ്ഞുview വീഡിയോ

ഒരു ചെറിയ വിവരണത്തിനായി ഈ വീഡിയോ കാണുകview of the lock's key features and modes:

6. പരിപാലനം

To ensure the longevity and proper functioning of your FITNATE Fingerprint Door Lock, follow these maintenance tips:

• ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ: Replace all four AAA batteries when the low battery alert is indicated. Always use new, high-quality alkaline batteries.
• വൃത്തിയാക്കൽ: Wipe the lock surface and fingerprint collector with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the finish or electronic components.
• പരിസ്ഥിതി വ്യവസ്ഥകൾ: This lock is designed for indoor use. While it can be used on interior doors leading to garages or other protected areas, it is not recommended for direct outdoor exposure to harsh weather conditions. Operating temperature range is 23°F to 131°F (-5°C to 55°C).

7. പ്രശ്‌നപരിഹാരം

If you encounter issues with your FITNATE Fingerprint Door Lock, please refer to the following common troubleshooting steps:

• ലോക്ക് പ്രതികരിക്കുന്നില്ല: Check battery levels. Replace batteries if low. Use the mechanical key for emergency access.
• വിരലടയാളം തിരിച്ചറിയാൻ കഴിഞ്ഞില്ല: Ensure your finger is clean and dry. Try different angles or re-register your fingerprint if issues persist. Ensure you are using a registered fingerprint.
• Lock does not auto-lock: Verify that the auto-lock function is enabled (it is by default). Check for any obstructions in the door frame or latch mechanism.
• Cannot enter Passage Mode: Ensure you are following the correct procedure for activating Passage Mode (administrator fingerprint held until 10 beeps).
• Lock is making unexpected sounds: Check if Silent Mode is active. If not, and the sound is persistent or unusual, contact customer support.

For more detailed troubleshooting, please refer to the dedicated troubleshooting guide that came with your product.

8 സ്പെസിഫിക്കേഷനുകൾ

9. വാറൻ്റിയും പിന്തുണയും

Specific warranty information and detailed customer support contacts are typically provided with your product packaging or on the manufacturer's official website. Please refer to the "After-Sales Card" or "Troubleshooting Guide" included in your package for direct support channels.

For further assistance, you may visit the official FITNATE Store on Amazon: FITNATE Store.