ROBOTIME Clear Acrylic Display Case

ആമുഖം

This manual provides instructions for the assembly, use, and maintenance of your ROBOTIME Clear Acrylic Display Case, Model DF03L. This display case is designed to protect and showcase your valuable collectibles, miniature house kits, and other items from dust and damage.

Figure 1: ROBOTIME Clear Acrylic Display Case (DF03L) and its packaging.

പ്രധാനപ്പെട്ട സുരക്ഷാ വിവരങ്ങൾ

• മുന്നറിയിപ്പ്: ചെറിയ ഭാഗങ്ങൾ കാരണം 3 വയസ്സിന് താഴെയുള്ള കുട്ടികൾക്കുള്ളതല്ല.
• Handle acrylic panels with care to prevent scratches.
• Ensure all panels are securely fitted during assembly to maintain structural integrity.

പാക്കേജ് ഉള്ളടക്കം

Your ROBOTIME Clear Acrylic Display Case package includes the following components:

• Acrylic side panels (various sizes)
• Acrylic top panel
• White base panel
• Protective film on all acrylic panels (must be removed before assembly)

അസംബ്ലി നിർദ്ദേശങ്ങൾ

The ROBOTIME Clear Acrylic Display Case features a seamless snap-fit design for quick and easy assembly, typically within 3 minutes. No tools are required.

ഘട്ടം 1: പാനലുകൾ തയ്യാറാക്കുക

Carefully remove the double-sided protective film from all acrylic panels before beginning assembly. This ensures crystal-clear visibility.

Figure 2: Protective film removal and panel features.

Step 2: Assemble Side Panels to Base

Place the white base panel flat. Insert the side acrylic panels into the grooves on the base, ensuring the grooves on the side panels face inwards. Secure them tightly by pressing down firmly.

Figure 3: Visual guide for panel assembly.

Step 3: Attach Top Panel

Once all four side panels are in place, carefully align and place the top acrylic panel onto the assembled structure. Ensure it snaps securely into the grooves of the side panels.

Figure 4: Attaching the top panel.

Step 4: Front Door Installation

The display case features a front-facing door design. Tilt the front panel slightly to insert it into the top and bottom grooves, then gently push it into place. It should fit snugly.

അസംബ്ലി വീഡിയോകൾ

For a visual guide on assembly, please refer to the following videos:

ഉപയോഗം

The ROBOTIME Clear Acrylic Display Case is ideal for showcasing a variety of items while protecting them from dust.

• Display Collectibles: Perfect for miniature house kits (except Dora's Loft DG12), action figures, models, figurines, toys, and other memorabilia.
• പൊടി സംരക്ഷണം: The enclosed design helps keep your items clean and free from dust accumulation.
• സ്റ്റാക്ക് ചെയ്യാവുന്ന ഡിസൈൻ: Multiple display cases can be stacked securely to create a larger display unit, optimizing space and enhancing visual appeal. The classic dovetail structure supports up to 6KG.

Figure 5: Display case providing dust protection for a miniature house.

Figure 6: Stackable design with 6KG carrying capacity.

Figure 7: Front-facing door for easy access.

മെയിൻ്റനൻസ്

To keep your display case in optimal condition:

• വൃത്തിയാക്കൽ: മൃദുവായ, ഡി ഉപയോഗിച്ച് അക്രിലിക് പ്രതലങ്ങൾ തുടയ്ക്കുകamp cloth. Avoid abrasive cleaners or harsh chemicals, as these can scratch or damage the acrylic.
• പൊടിയിടൽ: Regularly dust the exterior with a microfiber cloth to maintain clarity.

സ്പെസിഫിക്കേഷനുകൾ

ട്രബിൾഷൂട്ടിംഗ്

• Panels not fitting: Ensure the protective film has been completely removed from both sides of all panels. Verify that the grooves are correctly aligned and apply firm, even pressure during assembly.
• വാതിൽ ശരിയായി അടയ്ക്കുന്നില്ല: Check for any obstructions in the door's path or misalignment of the hinges. Ensure the top and bottom panels are fully seated.
• Scratches on panels: Minor scratches may occur if the protective film was not removed carefully or if abrasive materials were used for cleaning. Always use a soft cloth for cleaning.

വാറൻ്റിയും പിന്തുണയും

For any questions, concerns, or support regarding your ROBOTIME Clear Acrylic Display Case, please contact ROBOTIME customer service through your retailer's support channels. Please retain your proof of purchase for warranty claims.