ZGRMBO Digital Pool Thermometer User Manual

ആമുഖം

The ZGRMBO Digital Pool Thermometer provides an accurate and convenient way to monitor water temperature in various environments, along with indoor temperature and time display. Its wireless design allows for remote monitoring, making it ideal for pools, bathtubs, fish tanks, and more.

This manual provides detailed instructions for setting up, operating, and maintaining your ZGRMBO Digital Pool Thermometer to ensure optimal performance and longevity.

Image: The ZGRMBO Digital Pool Thermometer floating unit and its indoor display receiver.

ഉൽപ്പന്ന ഘടകങ്ങൾ

The ZGRMBO Digital Pool Thermometer package includes the following items:

• 1 x Floating Pool Thermometer Sensor Unit
• 1 x Indoor Display Receiver Unit
• 1 x ലാനിയാർഡ്
• ഉപയോക്തൃ മാനുവൽ (ഈ പ്രമാണം)

Note: AAA batteries (2 for sensor, 2 for receiver) are not included and must be purchased separately.

സജ്ജീകരണ നിർദ്ദേശങ്ങൾ

Follow these steps to set up your ZGRMBO Digital Pool Thermometer:

1. ബാറ്ററി ഇൻസ്റ്റാളേഷൻ

Proper battery installation is crucial for the device's functionality and waterproofing.

1. For the Indoor Display Receiver:

   Locate the battery compartment on the back of the indoor display unit. Open the cover and insert 2 x AAA batteries, ensuring correct polarity (+/-). Close the battery cover securely.
2. For the Floating Pool Thermometer Sensor Unit:

   Carefully unscrew the top cover of the floating sensor unit. Locate the battery box inside. Insert 2 x AAA batteries, observing correct polarity. Crucially, ensure the rubber sealing ring is properly seated and then tighten the cover firmly to prevent water seepage.

ചിത്രം: വിശദമായത് view of battery compartments for both the indoor display unit and the floating sensor unit.

Image: Visual guide for the 3-step wireless connection: install batteries in control, install batteries in sensor, wait 3 minutes for data reception.

2. പ്രാരംഭ കണക്ഷൻ

After installing batteries in both units, place the floating sensor unit in the water (pool, bathtub, etc.). The indoor display receiver will automatically attempt to connect with the sensor. Allow approximately 3 minutes for the units to establish a connection and begin displaying temperature data.

If the temperature information is not received after 3 minutes, press and hold the "Search Button" on the indoor display unit for 2 seconds to manually initiate transmission. The signal icon on the LCD display will flash during this process.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The ZGRMBO Digital Pool Thermometer offers several display modes and functions:

ഡിസ്പ്ലേ മോഡുകൾ

Image: The indoor display unit showing water temperature, indoor temperature, and current time.

• ജലത്തിൻ്റെ താപനില: Displays the temperature measured by the floating sensor unit.
• ഇൻഡോർ താപനില: Displays the ambient temperature at the location of the indoor display receiver.
• സമയ പ്രദർശനം: Shows the current time (12/24-hour format).

ബട്ടൺ പ്രവർത്തനങ്ങൾ

Image: Close-up of the indoor display unit, highlighting the Search, MEM/+, and SET/℃/℉ buttons, and the battery box location.

• തിരയൽ ബട്ടൺ: Press and hold for 2 seconds to manually search for the sensor signal.
• MEM/+ Button:
  • ഒരിക്കൽ അമർത്തുക view the maximum temperature recorded for the day.
  • ഇതിലേക്ക് വീണ്ടും അമർത്തുക view the minimum temperature recorded for the day.
  • In setting mode, use to increase values.
• SET/℃/℉ Button:
  • Press once to switch between Celsius (℃) and Fahrenheit (℉) temperature units.
  • സമയ ക്രമീകരണ മോഡിൽ പ്രവേശിക്കാൻ അമർത്തിപ്പിടിക്കുക.

സമയം ക്രമീകരിക്കുന്നു

1. Press and hold the "SET/℃/℉" button until the hour digits begin to flash.
2. Use the "MEM/+" button to adjust the hour.
3. Press the "SET/℃/℉" button again to move to the minute digits.
4. Use the "MEM/+" button to adjust the minutes.
5. Press the "SET/℃/℉" button one more time to confirm and exit time setting mode.

മെയിൻ്റനൻസ്

To ensure the longevity and accuracy of your ZGRMBO Digital Pool Thermometer, follow these maintenance guidelines:

• വൃത്തിയാക്കൽ: Wipe both the sensor unit and the display receiver with a soft, damp തുണി. ഉരച്ചിലുകളുള്ള ക്ലീനറുകളോ ലായകങ്ങളോ ഉപയോഗിക്കരുത്.
• ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ: Replace batteries in both units when the low battery indicator appears on the display. Always ensure the sensor unit's cover is tightened securely after battery replacement to maintain its IPX8 waterproof rating.
• Water Seepage Prevention: Before placing the digital pool thermometer in the water, always ensure the thermometer cover is tightened completely. This is critical to prevent water from entering the unit.
• Addressing Water Mist: If you observe water mist on the screen of the wireless pool thermometer lid, immediately unscrew the lid. Allow the interior to dry completely before re-sealing and using the device again. This indicates a potential breach in the seal that needs to be addressed.
• സംഭരണം: When not in use for extended periods, remove batteries from both units and store them in a cool, dry place.

ട്രബിൾഷൂട്ടിംഗ്

If you encounter issues with your ZGRMBO Digital Pool Thermometer, refer to the following common problems and solutions:

സ്പെസിഫിക്കേഷനുകൾ

ആപ്ലിക്കേഷൻ സാഹചര്യങ്ങൾ

The ZGRMBO Digital Pool Thermometer is versatile and suitable for a wide range of applications:

• നീന്തൽക്കുളങ്ങൾ
• Bathtubs and Children's Bathing
• Fish Tanks and Aquariums
• Saunas and Hot Springs
• Aquaculture Ponds

ചിത്രം: ഉദാamples of where the ZGRMBO thermometer can be used, such as swimming pools, aquariums, and hot springs.

ഉപഭോക്തൃ പിന്തുണ

For any usage problems, questions, or concerns not covered in this manual, please feel free to contact ZGRMBO customer service. We are committed to providing assistance and ensuring your satisfaction with our product.

ഉൽപ്പന്ന പാക്കേജിംഗ് അല്ലെങ്കിൽ റീട്ടെയിലറുടെ വിവരങ്ങൾ പരിശോധിക്കുക. webനിർദ്ദിഷ്ട ബന്ധപ്പെടാനുള്ള വിവരങ്ങൾക്കായി സൈറ്റ്.