Minetom BL-HW02

Minetom BL-HW02 Outdoor RGB Christmas Laser Light Projector User Manual

Model: BL-HW02

1. ആമുഖം

വാങ്ങിയതിന് നന്ദി.asing the Minetom BL-HW02 Outdoor RGB Christmas Laser Light Projector. This device is designed to create dynamic and decorative light displays for various occasions, both indoors and outdoors. Featuring multiple color combinations, motion effects, and remote control operation, it offers a versatile lighting solution. Please read this manual thoroughly before use to ensure proper operation and safety.

2 സുരക്ഷാ വിവരങ്ങൾ

3. പാക്കേജ് ഉള്ളടക്കം

പാക്കേജിൽ എല്ലാ ഇനങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:

4. സജ്ജീകരണം

4.1 Choosing an Installation Method

The projector offers three installation options: ground-mounted, wall-mounted, or placed on a flat surface.

Minetom laser light projector showing three installation methods: wall-mounted, ground-mounted, and placed on a flat surface.

Image: The Minetom laser light projector can be installed in three ways: wall-mounted, ground-mounted, or placed on a flat surface using the included accessories.

  1. Ground-Mounted: Attach the ground stake to the projector. Insert the stake firmly into soft ground in your desired outdoor location.
  2. മതിൽ ഘടിപ്പിച്ചത്: Attach the round base to the projector. Secure the base to a wall using appropriate screws (not included) for a stable installation.
  3. Placed on Plane: Attach the round base to the projector. Place the projector on any stable, flat surface indoors or outdoors.

4.2 പവർ കണക്ഷൻ

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Once powered on, the projector will begin its default light show. Use the RF remote control to customize the display.

5.1 വിദൂര നിയന്ത്രണ പ്രവർത്തനങ്ങൾ

The RF remote control allows you to manage various settings from a distance. Ensure 2*AAA batteries (not included) are installed in the remote.

Diagram of the RF remote control for the Minetom laser light projector, showing buttons for power, timers, color selection, motion, and strobe effects.

Image: RF Remote Control layout with functions for each button.

റിമോട്ട് കൺട്രോൾ ബട്ടൺ പ്രവർത്തനങ്ങൾ
ബട്ടൺഫംഗ്ഷൻ
ഓൺ/ഓഫ്പ്രൊജക്ടർ ഓണാക്കുകയോ ഓഫാക്കുകയോ ചെയ്യുന്നു.
2H / 4H / 6HSets the timer for 2, 4, or 6 hours.
(H) RestoreRestores to default timing (6 hours on, 18 hours off).
വർണ്ണ ചക്രംCycles through Green, Blue, Red-Green, Blue-Green, Red-Blue, Red-Green-Blue, and Red-Green-Blue cycle.
ശ്വസന മോഡ്Activates a slow fade-in/fade-out effect.
Jumping ModeActivates a rapid color change effect.
S0 (Static)Sets the light display to static (no motion).
S- / S+Adjusts rotation speed (S- for slow, S+ for fast).
R / G / B.Selects Red, Green, or Blue light individually.
R/G/B BreathingActivates breathing mode for individual Red, Green, or Blue colors.
R/G/B StrobeActivates strobe mode for individual Red, Green, or Blue colors. Press sequentially to adjust speed (Slow, Medium, Fast, Stop).
R/G/B SteadySets individual Red, Green, or Blue colors to steady (non-flashing).

5.2 വർണ്ണ കോമ്പിനേഷനുകൾ

The projector supports various color combinations to create diverse effects.

Seven different color combinations displayed by the Minetom laser light projector: Red, Green, Blue, Red Green, Red Blue, Green Blue, and Red Green Blue.

ചിത്രം: ഉദാamples of the 7 available color combinations.

6. IP65 വാട്ടർപ്രൂഫ് റേറ്റിംഗ്

The projector body is designed with an IP65 waterproof rating, ensuring reliable performance in various weather conditions such as snow, rain, dust, and intense sunlight. It is cold-proof, operating effectively from -30°F to 104°F.

Minetom laser light projector operating outdoors in both rain and snow, demonstrating its IP65 waterproof and cold-proof capabilities.

Image: The projector operating in rainy and snowy conditions, highlighting its IP65 waterproof and cold-proof features.

7. Coverage Area

The projector can cover a significant area, illuminating indoor ceilings, walls, or outdoor walls, gardens, lawns, trees, and rooftops. From a distance of 32.8 feet, it can cover approximately 3229.17 square feet.

Diagram showing the Minetom laser light projector's coverage area increasing with distance, from 226 sq ft at 10 ft to 3541 sq ft at 40 ft.

Image: Coverage area chart illustrating how the projected area expands with increased distance from the surface.

8. പരിപാലനം

9. പ്രശ്‌നപരിഹാരം

പൊതുവായ പ്രശ്നങ്ങളും പരിഹാരങ്ങളും
പ്രശ്നംപരിഹാരം
പ്രൊജക്ടർ ഓണാകുന്നില്ല.
  • പവർ അഡാപ്റ്റർ ഒരു വർക്കിംഗ് ഔട്ട്ലെറ്റിൽ സുരക്ഷിതമായി പ്ലഗ് ചെയ്തിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക.
  • Check if the remote control batteries are correctly installed and not depleted.
  • Press the ON/OFF button on the remote.
റിമോട്ട് കൺട്രോൾ പ്രതികരിക്കുന്നില്ല.
  • Replace the remote control batteries (2*AAA, not included).
  • റിമോട്ടിനും പ്രൊജക്ടറിനും ഇടയിൽ തടസ്സങ്ങളൊന്നുമില്ലെന്ന് ഉറപ്പാക്കുക.
  • Confirm you are within the remote's operating range.
പ്രകാശ ഔട്ട്പുട്ട് മങ്ങിയതോ സ്ഥിരതയില്ലാത്തതോ ആണ്.
  • പ്രൊജക്ടർ ലെൻസിൽ വൃത്തികേടായി തോന്നിയാൽ അത് വൃത്തിയാക്കുക.
  • Ensure the projector is not operating in extreme temperatures outside its specified range.
Multiple projectors interfere with each other.
  • This can occur with multiple RF remote-controlled devices. Try to operate one projector at a time, or position them further apart.

10 സ്പെസിഫിക്കേഷനുകൾ

ഫീച്ചർവിശദാംശങ്ങൾ
മോഡൽ നമ്പർBL-HW02
ബ്രാൻഡ്മിനെറ്റോം
നിറംചുവപ്പ് പച്ച നീല
മെറ്റീരിയൽപ്ലാസ്റ്റിക്
ഫിനിഷ് തരംപ്രൊജക്ടർ
പ്രകാശ സ്രോതസ്സ് തരംലൈറ്റ് എമിറ്റിംഗ് ഡയോഡ്
പവർ ഉറവിടംകോർഡഡ് ഇലക്ട്രിക്
മൗണ്ടിംഗ് തരംഫ്ലോർ മൗണ്ട്, വാൾ മൗണ്ട്
ഉൽപ്പന്ന അളവുകൾ2.75"L x 2.75"W x 11.02"H
ഇനത്തിൻ്റെ ഭാരം14 ഔൺസ്
ബീം ആംഗിൾ120 ഡിഗ്രി
വാട്ടർപ്രൂഫ് റേറ്റിംഗ്IP65
പ്രവർത്തന താപനില-30°F മുതൽ 104°F വരെ
Coverage Area (approx.)3229.17 sq ft at 32.8 ft distance

11. വാറൻ്റിയും പിന്തുണയും

For warranty information or technical support, please refer to the contact details provided at the point of purchase or visit the official Minetom webസൈറ്റ്. വാങ്ങിയതിന്റെ തെളിവായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.

അനുബന്ധ രേഖകൾ - BL-HW02

പ്രീview മിനെറ്റോം എസ്14 സോളാർ സ്ട്രിംഗ് ലൈറ്റ്സ് യൂസർ മാനുവലും സുരക്ഷാ ഗൈഡും
മിനെറ്റോം എസ്14 സോളാർ സ്ട്രിംഗ് ലൈറ്റുകൾക്കായുള്ള സമഗ്ര ഗൈഡ്, ഇൻസ്റ്റാളേഷൻ, പ്രവർത്തനം, സുരക്ഷാ മുൻകരുതലുകൾ, ട്രബിൾഷൂട്ടിംഗ്, വാറന്റി വിവരങ്ങൾ എന്നിവ ഉൾക്കൊള്ളുന്നു. നിങ്ങളുടെ സൗരോർജ്ജത്തിൽ പ്രവർത്തിക്കുന്ന സ്ട്രിംഗ് ലൈറ്റുകൾ എങ്ങനെ സജ്ജീകരിക്കാമെന്നും പരിപാലിക്കാമെന്നും അറിയുക.
പ്രീview BlissLights BL-15 Laser Projector User Guide, Specifications, and Warranty
Comprehensive user guide for the BlissLights BL-15 laser projector. Includes setup, operation, safety notices, product specifications, installation tips, and limited warranty information.
പ്രീview BlissLights BL-50 ലേസർ പ്രൊജക്ടർ ഉപയോക്തൃ ഗൈഡും സ്പെസിഫിക്കേഷനുകളും
BlissLights BL-50 ലേസർ പ്രൊജക്ടറിനായുള്ള സമഗ്രമായ ഉപയോക്തൃ ഗൈഡ്, സജ്ജീകരണം, പ്രവർത്തനം, സുരക്ഷ, സ്പെസിഫിക്കേഷനുകൾ, പരിമിതമായ വാറന്റി എന്നിവ ഉൾക്കൊള്ളുന്നു.
പ്രീview പാനസോണിക് നെറ്റ്‌വർക്ക് ക്യാമറ BL-VT164/BL-VP100 സീരീസ് പ്രവർത്തന നിർദ്ദേശങ്ങൾ
പാനസോണിക് BL-VT164 സീരീസ്, BL-VP100 സീരീസ് നെറ്റ്‌വർക്ക് ക്യാമറകൾക്കുള്ള വിശദമായ പ്രവർത്തന നിർദ്ദേശങ്ങൾ. സജ്ജീകരണം, കോൺഫിഗറേഷൻ, നിരീക്ഷണം, പരിപാലനം എന്നിവ ഇതിൽ ഉൾപ്പെടുന്നു.
പ്രീview സ്മാർട്ട് വൈ-ഫൈ മ്യൂസിക് സ്റ്റാർ ലൈറ്റ് യൂസർ മാനുവൽ - BL-XK01
ഷെൻഷെൻ ബൊലോങ് ടെക്നോളജി കമ്പനി ലിമിറ്റഡിനായുള്ള സമഗ്രമായ ഉപയോക്തൃ മാനുവൽ. സ്മാർട്ട് വൈ-ഫൈ മ്യൂസിക് സ്റ്റാർ ലൈറ്റ് (മോഡൽ BL-XK01), 'സ്മാർട്ട് ലൈഫ്' വഴിയുള്ള സജ്ജീകരണം, പ്രവർത്തനം, ആപ്പ് നിയന്ത്രണം, വോയ്‌സ് കമാൻഡുകൾ, ട്രബിൾഷൂട്ടിംഗ്, സുരക്ഷാ മുൻകരുതലുകൾ എന്നിവ വിശദീകരിക്കുന്നു.
പ്രീview BL-3D01 ഉപയോക്തൃ മാനുവൽ: സജ്ജീകരണം, പ്രവർത്തനം, സ്പെസിഫിക്കേഷനുകൾ
BL-3D01 പ്രൊജക്ഷൻ ഉപകരണത്തിനായുള്ള സമഗ്രമായ ഉപയോക്തൃ മാനുവൽ, അൺപാക്കിംഗ്, സജ്ജീകരണം, ബട്ടൺ പ്രവർത്തനങ്ങൾ, റിമോട്ട് കൺട്രോൾ പ്രവർത്തനങ്ങൾ, സ്പെസിഫിക്കേഷനുകൾ, നിയന്ത്രണ വിവരങ്ങൾ എന്നിവ വിശദമാക്കുന്നു.