1. ഉൽപ്പന്നം കഴിഞ്ഞുview
This manual provides essential information for the installation, operation, and maintenance of your Hatteker Electric Men Shaver Replacement Blade Nets. These replacement blade nets are specifically designed for Hatteker Electric Shaver Models RSCW-767 and HT-602, ensuring optimal performance and a comfortable shaving experience.

ചിത്രം 1.1: Three gold-colored Hatteker shaver replacement blade nets, designed for models RSCW-767 and HT-602. Each net features a fine mesh pattern for efficient hair capture and a smooth shave.
2 സുരക്ഷാ വിവരങ്ങൾ
Please read all safety instructions carefully before using or handling the replacement blade nets. Failure to follow these instructions may result in injury or damage to the product.
- മൂർച്ചയുള്ള ബ്ലേഡുകൾ: The replacement blade nets contain very sharp components. Handle with extreme care to avoid cuts or injuries.
- കുട്ടികളിൽ നിന്ന് അകന്നുനിൽക്കുക: Store the blade nets and the shaver out of reach of children.
- ഉദ്ദേശിച്ച ഉപയോഗം: Use these replacement blade nets only for their intended purpose with Hatteker Electric Shaver Models RSCW-767 and HT-602.
- പരിശോധന: Before each use, inspect the blade nets for any signs of damage or wear. Do not use if damaged.
3. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
Follow these steps to properly install the new replacement blade nets into your Hatteker electric shaver.
- പവർ ഓഫ്: Ensure your Hatteker electric shaver is turned off and unplugged from any power source.
- Remove Old Blade Nets: Gently press the release buttons (if applicable) or twist the shaver head to remove the old blade nets. Refer to your shaver's original manual for specific instructions on removing the shaver head.
- Clean Shaver Head: Clean any hair residue or debris from the shaver head area before installing new nets. A small brush can be used for this purpose.
- Install New Blade Nets: Carefully align the new gold replacement blade nets with the shaver head. Press them firmly into place until you hear a click, indicating they are securely fastened. Ensure the nets are seated correctly and do not wobble.
- ടെസ്റ്റ് ഫിറ്റ്: Gently shake the shaver to ensure the blade nets are securely attached.
4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
Once the new blade nets are installed, your shaver is ready for use. For optimal shaving results, follow these general guidelines:
- ബാറ്ററി ചാർജ് ചെയ്യുക: Ensure your shaver's battery is fully charged before use.
- ഡ്രൈ ഷേവ്: മികച്ച ഫലങ്ങൾക്കായി, വരണ്ട ചർമ്മത്തിൽ ഷേവർ ഉപയോഗിക്കുക.
- നേരിയ മർദ്ദം: Apply light, even pressure to your skin. Do not press too hard, as this can cause irritation and reduce the lifespan of the blade nets.
- Circular Motions: Move the shaver in small, circular motions against the direction of hair growth for a close shave.
- ഓരോ ഉപയോഗത്തിനും ശേഷം വൃത്തിയാക്കുക: Refer to the Maintenance section for cleaning instructions.
5. പരിപാലനവും ശുചീകരണവും
Regular cleaning and maintenance will prolong the life of your replacement blade nets and ensure consistent performance.
- പ്രതിദിന ശുചീകരണം: After each shave, turn off and unplug the shaver. Remove the blade nets and tap out any loose hair. Use the provided cleaning brush to remove stubborn hair from both the nets and the shaver body.
- Rinsing (if applicable): If your shaver is waterproof, you may rinse the blade nets under running water. Ensure they are completely dry before reattaching them to the shaver. Do not rinse the shaver body unless explicitly stated in your shaver's original manual.
- ആഴത്തിലുള്ള വൃത്തിയാക്കൽ: Periodically, perform a more thorough cleaning. This may involve disassembling the blade nets further (if designed for it) and cleaning with a mild soap solution. Rinse thoroughly and allow to air dry completely.
- ലൂബ്രിക്കേഷൻ: Some shavers benefit from occasional lubrication of the cutting elements. Refer to your shaver's original manual for specific lubrication instructions.
- സംഭരണം: Store the shaver with the blade nets attached in a clean, dry place, away from direct sunlight and extreme temperatures.
6. പ്രശ്നപരിഹാരം
If you encounter issues with your shaver after installing the new blade nets, consider the following common solutions:
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| മോശം ഷേവിംഗ് പ്രകടനം | Blade nets not seated correctly; Hair buildup; Shaver battery low. | Ensure blade nets are securely installed. Clean blade nets and shaver head thoroughly. Charge shaver battery. |
| ത്വക്ക് പ്രകോപനം | Applying too much pressure; Skin not prepared; Blade nets are new and require break-in. | Use lighter pressure. Ensure skin is clean and dry. Allow a few shaves for the new nets to adapt. |
| അസാധാരണമായ ശബ്ദം | Blade nets not installed correctly; Debris inside shaver head. | Re-install blade nets, ensuring they click into place. Clean shaver head thoroughly. |
If the problem persists after trying these solutions, please contact Hatteker customer support.
7. ഉൽപ്പന്ന സവിശേഷതകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| ഉൽപ്പന്നത്തിൻ്റെ പേര് | Hatteker Electric Men Shaver Replacement Blade Nets |
| അനുയോജ്യമായ മോഡലുകൾ | RSCW-767, HT-602 |
| നിറം | സ്വർണ്ണം |
| Number of Blades (per set) | 3 |
| ശുപാർശ ചെയ്യുന്ന ഉപയോഗം | ഷേവിംഗ് |
| പ്രായപരിധി | മുതിർന്നവർ |
| ചർമ്മത്തിൻ്റെ തരം അനുയോജ്യത | എല്ലാ ചർമ്മ തരങ്ങളും |
| പാക്കേജ് അളവുകൾ | 4.25 x 4.25 x 0.75 ഇഞ്ച് |
| ഭാരം | 0.32 ഔൺസ് |
| നിർമ്മാതാവ് | ഹട്ടേക്കർ |
8. വാറൻ്റിയും പിന്തുണയും
For information regarding product warranty, returns, or technical support, please refer to the original purchase documentation or contact Hatteker customer service directly.
Hatteker Customer Service:
- Please visit the official Hatteker webഏറ്റവും കാലികമായ ബന്ധപ്പെടാനുള്ള വിവരങ്ങൾക്കായി സൈറ്റ്.
- Refer to your product packaging for any specific support contact details.





