YESOUL Self-Powered Exercise Bike C1EV User Manual

1. ആമുഖം

Thank you for choosing the YESOUL Self-Powered Exercise Bike C1EV. This indoor cycling fitness equipment is designed to provide an immersive and effective workout experience with its self-generating power system, integrated cooling fan, and smart app connectivity. This manual provides essential information for assembly, operation, maintenance, and troubleshooting to ensure safe and optimal use of your exercise bike.

Figure 1: YESOUL Self-Powered Exercise Bike C1EV

2 സുരക്ഷാ വിവരങ്ങൾ

Please read all instructions carefully before using the exercise bike. Keep this manual for future reference.

• ഏതെങ്കിലും പുതിയ വ്യായാമ പരിപാടി ആരംഭിക്കുന്നതിന് മുമ്പ് നിങ്ങളുടെ ഡോക്ടറെ സമീപിക്കുക.
• Ensure all parts are securely assembled and tightened before each use.
• പ്രവർത്തന സമയത്ത് ഉപകരണങ്ങളിൽ നിന്ന് കുട്ടികളെയും വളർത്തുമൃഗങ്ങളെയും അകറ്റി നിർത്തുക.
• Place the bike on a flat, stable surface.
• Wear appropriate athletic attire and footwear.
• Do not insert fingers or objects into the fan blades or moving parts.
• Maximum user weight capacity: 300 lbs.

3. പാക്കേജ് ഉള്ളടക്കം

Verify that all components are present and undamaged before assembly. Refer to Figure 2 for a visual overview ഭാഗങ്ങളുടെ.

Figure 2: Unboxing and Components Overview

• പ്രധാന ഫ്രെയിം
• ഫ്രണ്ട് ട്യൂബ്
• പിൻ ട്യൂബ്
• ഹാൻഡിൽബാർ അസംബ്ലി
• ഹെഡ് ട്യൂബ്
• ഇരിപ്പിടം
• ഫാൻ
• ടാബ്‌ലെറ്റ് ഹോൾഡർ
• Pedal Set (Left/Right)
• അലങ്കാര കവർ
• കറങ്ങുന്ന ബ്രാക്കറ്റ്
• Parts Package (screws, nuts, washers, wrenches)
• ഉപയോക്തൃ മാനുവൽ

4. സജ്ജീകരണവും അസംബ്ലിയും

Follow these steps carefully for proper assembly. An installation video is available for visual guidance.

4.1. അൺബോക്സിംഗും തയ്യാറെടുപ്പും

1. Keep the bottom of the box side up.
2. Cut the tape on the box.
3. First, take out the Leg tube.
4. Flip the box.
5. Hold both sides of the box with both hands, then lift the box to reveal the bike and foam packaging.
6. Cut the tape and remove the polyfoam packaging.
7. Carefully remove all accessories from the polyfoam.

4.2. Installation of Bottom Tubes (Front and Rear)

You will need: Cap nut & D8 flat spacer & Carriage bolt, Open-ended wrench 13-15#(D).

1. For the Front Tube: Unscrew the pre-installed nut. Invert the bottom tube and insert the screw from the bottom. Support the screw with your left hand.
2. Lift the main frame with your other hand and insert the front tube into the lower part of the frame.
3. Screw the nut onto the screw. Use an open-ended wrench 13-15#(D) to tighten the nut securely.
4. For the Rear Tube: Repeat the process. Unscrew the pre-installed nut. Insert the rear tube into the lower part of the frame.
5. Screw the nut onto the screw. Use an open-ended wrench 13-15#(D) to tighten the nut securely.

4.3. Installation of Seat & Seat Post

You will need: Seat Post, Seat, Open-ended wrench 13-15#(D).

1. Loosen the knob on the main frame to the left until the seat post can be inserted. Pull the knob outward and hold it.
2. Insert the seat post into the frame to your desired height. Release the knob to secure it.
3. Insert the seat against the seat post holes.
4. Tighten the fixed knob of the seat sliding tube.
5. Tighten the nuts on both sides of the seat using the open-ended wrench 13-15#(D).
6. Use your hands to check that the seat is securely fastened.

Figure 3: Wider Cushion for reduced pressure on hips and tailbone.

4.4. Installation of Head Tube

You will need: Head Tube.

1. First, connect the adjustment pipeline from the head tube to the bike connection line.
2. Rotate the front column tightening knob in the left direction for 4-5 turns using one hand, pull the handle out and hold it.
3. Insert the head tube into the frame, then turn the knob to the right direction to the tightest position.

4.5. Installation of Handlebar Assembly

You will need: Handlebar Assembly, Hex wrench 5#(B), D6 elastic washer 2PCS, M6-12 bolt 2PCS, M6-35 bolt 1PC.

1. Untie the fixed Line's rope from the handlebar assembly.
2. Insert the D6 elastic washers into the M6-12 nuts.
3. Use a Hex wrench size 5 (B) to pre-tighten the two M6-12 nuts on the handlebar assembly.
4. Plug the rotating bracket into the handrail.
5. Use an M6-35 bolt to secure the rotating bracket.
6. Tighten each nut individually using the Hex wrench.

4.6. Installation of Fan

You will need: Fan, Hex wrench 5#(B), M6x35 hex socket flathead screw.

1. Align the fan with the holes on the rotating bracket.
2. Insert the M6x35 hex socket flat head screw from below and tighten it with a hex wrench 5#(B).
3. Secure the wire using the attached Velcro strap.
4. Connect the Type-C connector of the power cable to the fan's charging port.

Figure 4: Integrated fan provides cooling during workouts.

4.7. Installation of Tablet (Mobile Phone) Holder

You will need: Tablet Holder, M10 bolt 1PC, M10 jam nut 1PCS, Hex wrench 8#(A), Multi-function wrench 13-15-17-19#.

1. Insert the tablet (mobile phone) holder into the slot of the rotating bracket.
2. Manually fasten the M10 bolt and M10 jam nut into the holes.
3. Use hex wrench 8#(A) and multi-function wrench 13-15-17-19# to tighten the nut securely.

4.8. Installation of Pedals

You will need: Right Pedal, Left Pedal, Open-ended wrench 13-15#(D), Multi-function wrench 13-15-17-19#(C).

1. For the Right Pedal: Remove the nut pre-installed on the right pedal. Rotate the pedal clockwise into the crank. Tighten the foot pedal using an open-ended wrench 13-15#(D).
2. For the Left Pedal: Remove the nut pre-installed on the left pedal. Screw the foot pedal counter-clockwise into the crank. Tighten the foot pedal using an open-ended wrench 13-15#(D).

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Your YESOUL Exercise Bike is designed for intuitive operation. Here's how to get started and make the most of your workout.

5.1. Self-Generating Power

The bike features a self-powered system. Your pedaling motion generates electricity to power the integrated cooling fan and LED indicator lights. No external power source is required, offering flexibility in placement.

Figure 5: The bike's self-powered design generates electricity from your pedaling.

5.2. കൂളിംഗ് ഫാൻ പ്രവർത്തനം

The built-in fan provides a refreshing breeze during your workout. Adjust the gear level by operating the fan switch located on the fan unit. The fan has multiple speed settings to suit your preference.

5.3. Magnetic Resistance Adjustment

The bike features 100 levels of magnetic resistance for a smooth and quiet ride. Rotate the red knob located on the main frame to increase or decrease the resistance. This allows for precise control over your workout intensity, from warm-up to high-intensity interval training (HIIT).

Figure 6: Adjust resistance with the red knob for customized workouts.

5.4. App Connectivity and Features

Connect your exercise bike to the YESOUL app via Bluetooth for an enhanced training experience. The app allows you to:

• Monitor real-time workout statistics (speed, time, RPM, distance).
• Explore immersive scenic rides.
• Join live training sessions and instructor-led classes for all skill levels.
• Track your progress over time.

Figure 7: The YESOUL App provides exclusive exercise plans and data tracking.

Note: iPad/tablet for reference only, sold separately.

6. പരിപാലനം

Regular maintenance ensures the longevity and optimal performance of your exercise bike.

• വൃത്തിയാക്കൽ: പരസ്യം ഉപയോഗിച്ച് ബൈക്ക് തുടയ്ക്കുകamp ഓരോ ഉപയോഗത്തിനു ശേഷവും വിയർപ്പും പൊടിയും നീക്കം ചെയ്യാൻ തുണി ഉപയോഗിക്കുക. ഉരച്ചിലുകൾ ഉള്ള ക്ലീനറുകൾ ഒഴിവാക്കുക.
• പരിശോധന: എല്ലാ ബോൾട്ടുകളും നട്ടുകളും ഇറുകിയതാണെന്ന് ഉറപ്പാക്കാൻ ഇടയ്ക്കിടെ പരിശോധിക്കുക. ആവശ്യമെങ്കിൽ വീണ്ടും മുറുക്കുക.
• ബെൽറ്റ് ഡ്രൈവ്: The belt drive system is designed for low maintenance and quiet operation. No lubrication is required.
• സംഭരണം: നേരിട്ടുള്ള സൂര്യപ്രകാശത്തിൽ നിന്നും കടുത്ത താപനിലയിൽ നിന്നും മാറി വരണ്ടതും തണുത്തതുമായ സ്ഥലത്ത് ബൈക്ക് സൂക്ഷിക്കുക.

7. പ്രശ്‌നപരിഹാരം

If you encounter any issues with your YESOUL Exercise Bike, refer to the following common problems and solutions:

8 സ്പെസിഫിക്കേഷനുകൾ

Detailed specifications for the YESOUL Self-Powered Exercise Bike C1EV:

9. വാറൻ്റിയും പിന്തുണയും

For warranty information or technical support, please refer to the warranty card included in your package or visit the official YESOUL website. You can also contact customer service through the retailer where you purchased the product.