OMTech Galvo 50W ഫൈബർ ലേസർ എൻഗ്രേവർ കട്ടർ യൂസർ മാനുവൽ

1. ആമുഖം

This manual provides essential information for the safe and efficient operation of your OMTech Galvo 50W Fiber Laser Engraver Cutter. This all-metal body fiber laser engraver is designed for precision marking and cutting on various materials, offering high accuracy and speed.

Key features include a 0.01 mm spot diameter, a 5.9''x5.9'' workbed, and a maximum engraving speed of up to 10,000 mm/s. The laser is classified as Class 2 with an output power of 0.874 mW.

Figure 1: OMTech Galvo 50W Fiber Laser Engraver Cutter unit.

2 സുരക്ഷാ വിവരങ്ങൾ

Always prioritize safety when operating the laser engraver. Failure to follow safety guidelines can result in serious injury or damage to the equipment.

• നേത്ര സംരക്ഷണം: ലേസർ വികിരണങ്ങളിൽ നിന്ന് നിങ്ങളുടെ കണ്ണുകളെ സംരക്ഷിക്കാൻ എല്ലായ്പ്പോഴും ഉചിതമായ ലേസർ സുരക്ഷാ ഗ്ലാസുകൾ ധരിക്കുക.
• വെൻ്റിലേഷൻ: Ensure adequate ventilation in the work area to remove fumes and particles generated during engraving or cutting.
• മെറ്റീരിയൽ അനുയോജ്യത: Only engrave or cut materials approved for fiber lasers. Avoid materials that produce toxic fumes or are highly flammable.
• അടിയന്തരമായി നിർത്തുക: അടിയന്തര സ്റ്റോപ്പ് ബട്ടണിന്റെ സ്ഥാനവും പ്രവർത്തനവും സ്വയം പരിചയപ്പെടുത്തുക.
• മേൽനോട്ടം: പ്രവർത്തന സമയത്ത് യന്ത്രം ശ്രദ്ധിക്കാതെ വിടരുത്.

3. സജ്ജീകരണം

3.1 Initial Placement and Connections

Place the laser engraver on a stable, level surface. Connect the power cable and ensure all necessary peripheral connections are secure.

3.2 Software Installation and Compatibility

The OMTech Galvo 50W is compatible with LightBurn software and comes pre-loaded with EZCad. Install the required software on your computer (Windows 7, 8, 10, 11, or macOS) to control the laser engraving operations.

Figure 2: The laser engraver is compatible with LightBurn and EZCad on multiple operating systems.

3.3 Focusing with Red Dot Pointer

The engraver is equipped with a red dot indicator to assist in adjusting the laser focus. To activate or deactivate the red dot guider, press the dedicated focus button.

Figure 3: Red dot pointer for precise focus adjustment.

3.4 Rotary Axis Connection

For engraving on curved surfaces such as rings and bracelets, the unit includes a rotary axis connection port. Connect a compatible rotary axis accessory to this port as per the accessory's instructions.

Figure 4: The laser engraver supports a rotary axis for cylindrical objects.

4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

4.1 കൊത്തുപണി, മുറിക്കൽ പ്രക്രിയ

1. Prepare your design in LightBurn or EZCad software.
2. Place the material on the workbed. For curved items, use the rotary axis.
3. Use the red dot pointer to adjust the focus for optimal results.
4. Set the appropriate laser parameters (power, speed, frequency) for your material.
5. Initiate the engraving or cutting process from the software.
6. Monitor the process and ensure proper ventilation.

4.2 High Accuracy and Speed

The laser engraver offers high accuracy at 0.01 mm, allowing for detailed engravings. Its maximum engraving speed of 10,000 mm/s significantly boosts productivity.

ചിത്രം 5: ഉദാample of high-accuracy engraving.

Figure 6: Speed comparison highlighting the fiber laser's performance.

4.3 മെറ്റീരിയൽ അനുയോജ്യത

The OMTech Galvo 50W Fiber Laser Engraver Cutter is suitable for marking and etching a wide range of materials, including but not limited to:

• ലോഹങ്ങൾ: Brass, Aluminum, Silver, Tungsten, Titanium, Gold, Stainless Steel, Cast Aluminum, Copper.
• Non-Metals: Brick, Granite, Tile, Marble, Stone, Acrylic, Leather, Paper, Plastic, Wood, Glass.

Figure 7: Various materials suitable for engraving with the OMTech 50W Fiber Laser.

5. പരിപാലനം

പതിവ് അറ്റകുറ്റപ്പണികൾ നിങ്ങളുടെ ലേസർ എൻഗ്രേവറിന്റെ ദീർഘായുസ്സും മികച്ച പ്രകടനവും ഉറപ്പാക്കുന്നു.

• ലെൻസ് ക്ലീനിംഗ്: Periodically clean the laser lens with a specialized lens cleaning solution and cloth to maintain beam quality.
• വർക്ക്ബെഡ് വൃത്തിയാക്കൽ: Keep the workbed clean from debris and residue to prevent interference with engraving and ensure proper material placement.
• കണക്ഷൻ പരിശോധനകൾ: Regularly inspect all cables and connections for any signs of wear or looseness.
• വെൻ്റിലേഷൻ സിസ്റ്റം: Ensure the ventilation system is clear and functioning effectively to extract smoke and particles.

6. പ്രശ്‌നപരിഹാരം

നിങ്ങൾ നേരിട്ടേക്കാവുന്ന പൊതുവായ പ്രശ്നങ്ങളെ ഈ വിഭാഗം അഭിസംബോധന ചെയ്യുന്നു.

6.1 Laser Not Engaging

If the red laser pointer is active but the fiber laser does not engage, check the internal connections. A common issue can be a loose flat control cable from the mainboard to the fiber laser source. If accessible and you are comfortable, carefully open the case and ensure this cable is securely plugged in. If the issue persists or you are unsure, contact customer support.

6.2 സോഫ്റ്റ്‌വെയർ കണക്ഷൻ പ്രശ്നങ്ങൾ

If the software (LightBurn or EZCad) fails to connect to the engraver, ensure:

• The engraver is powered on.
• The USB cable is securely connected to both the engraver and the computer.
• The correct drivers are installed on your computer.
• No other software is attempting to communicate with the engraver simultaneously.

7 സ്പെസിഫിക്കേഷനുകൾ

ചിത്രം 8: ഓവർview of key product specifications.

8. വാറൻ്റിയും പിന്തുണയും

OMTech provides comprehensive customer service and support for its products.

• വാറൻ്റി: A 2-year support period is provided for this product.
• കസ്റ്റമർ സർവീസ്: A 24-hour service team is available in the US, Philippines, and China.
• സാങ്കേതിക സഹായം: Professional pre-sales and after-sales service, technical support, and on-site experience (by appointment) are offered.

ബന്ധപ്പെടാനുള്ള വിവരങ്ങൾ:

ഫോൺ: +1 (949) 438-4949

ഇമെയിൽ പിന്തുണ: SUPPORT@OMTECHLASER.COM

ഇമെയിൽ ടെക് സപ്പോർട്ട്: TECHSUPPORT@OMTLASER.COM

9. ഉൽപ്പന്ന വീഡിയോകൾ

No relevant product videos created by the seller were found in the provided data for the OMTech Galvo 50W Fiber Laser Engraver Cutter. The available videos pertain to a different product (WIFI Backup Camera) and have therefore not been embedded.