myQ സ്മാർട്ട് ഗാരേജ് ഡോർ വീഡിയോ കീപാഡ് വയർഡ് പവർ അഡാപ്റ്റർ കിറ്റ് ഇൻസ്ട്രക്ഷൻ മാനുവൽ

ആമുഖം

The myQ Smart Garage Door Video Keypad Wired Power Adapter Kit provides uninterrupted monitoring and seamless access for your Smart Garage Video Keypad. This accessory allows you to power your Video Keypad directly from any standard interior outlet, eliminating the need for battery charging or replacement. It includes all necessary components to convert your Video Keypad from battery to wired power, featuring a 25-foot power cord for discreet routing and an adjustable swivel mount for optimal viewകോണുകൾ.

ഉൽപ്പന്നം കഴിഞ്ഞുview

This kit is designed to enhance the functionality of your myQ Smart Garage Video Keypad by providing a continuous power source. It ensures your keypad remains operational at all times, offering consistent security and convenience. The kit includes:

• പവർ മൊഡ്യൂൾ
• 25-അടി പവർ കേബിൾ
• പിൻ കവർ
• Adjustable Swivel Mount
• മൌണ്ടിംഗ് ഹാർഡ്വെയർ

Note: The Smart Garage Video Keypad is sold separately and is required for use with this power adapter kit.

ചിത്രം: കഴിഞ്ഞുview of the myQ Smart Garage Door Video Keypad Wired Power Adapter Kit components, including the power adapter, cable, and mounting hardware.

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Installation of the Wired Power Adapter Kit is designed to be simple and can be completed with minimal tools. Follow these steps to convert your myQ Video Keypad to wired power:

1. Prepare the Keypad: Carefully remove the existing battery pack from your myQ Smart Garage Video Keypad.
2. Install Power Module: Insert the new power module from the kit into the battery compartment of the keypad. Ensure it is securely seated.
3. വയറുകൾ ബന്ധിപ്പിക്കുക: Connect the two leads from the power module to the corresponding terminals on the back cover of the keypad. This typically involves using a screwdriver to secure the wires.
4. Mount the Keypad: Attach the keypad with the new back cover to your desired location. The kit includes an adjustable swivel mount, allowing you to customize the viewഒപ്റ്റിമൽ ദൃശ്യപരതയ്ക്കായി ആംഗിൾ.
5. പവർ കേബിൾ റൂട്ട് ചെയ്യുക: Route the 25-foot power cable from the keypad to a standard interior wall outlet. The cable is designed to be discreet and can be concealed along walls or trim.
6. പ്ലഗ് ഇൻ: Once the cable is routed and the keypad is mounted, plug the power adapter into a standard interior wall outlet.

Image: Visual guide showing the four main steps for installing the power adapter: removing the battery, choosing wire installation method, mounting, and plugging in.

Image: Illustration comparing the "Through Wire Installation" method, where the cable passes through the wall, and the "External Wire Installation" method, where the cable runs along the exterior surface.

Image: A person's hands adjusting the myQ Smart Garage Video Keypad after the wired power adapter has been installed, emphasizing continuous operation.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Once the myQ Smart Garage Door Video Keypad Wired Power Adapter Kit is installed and plugged into a power outlet, your myQ Video Keypad will receive continuous power. This eliminates the need for manual battery charging or replacement, ensuring the keypad is always operational for monitoring and access to your garage. The keypad functions as normal, providing seamless integration with your myQ system.

മെയിൻ്റനൻസ്

The primary benefit of this power adapter kit is to reduce maintenance requirements. With wired power, you will no longer need to charge or replace batteries for your myQ Smart Garage Video Keypad. Periodically inspect the power cable for any signs of wear or damage, and ensure the connection to the wall outlet remains secure. Keep the keypad clean by wiping it with a soft, dry cloth.

ട്രബിൾഷൂട്ടിംഗ്

If your myQ Smart Garage Video Keypad is not receiving power after installing the adapter kit, consider the following:

• പവർ ഔട്ട്ലെറ്റ് പരിശോധിക്കുക: മറ്റൊരു ഉപകരണം പ്ലഗ് ഇൻ ചെയ്‌ത് വാൾ ഔട്ട്‌ലെറ്റ് പ്രവർത്തനക്ഷമമാണെന്ന് ഉറപ്പാക്കുക.
• കണക്ഷനുകൾ പരിശോധിക്കുക: Double-check that the power module leads are correctly and securely connected to the back cover terminals of the keypad.
• കേബിൾ പരിശോധിക്കുക: Examine the 25-foot power cable for any visible damage or kinks that might interrupt power flow.
• Re-seat Module: Carefully remove and re-insert the power module into the keypad's battery compartment to ensure proper contact.
• Keypad Functionality: If the issue persists, ensure the myQ Smart Garage Video Keypad itself is functioning correctly when powered by its original battery (if applicable) or another power source.

For further assistance, refer to the myQ Smart Garage Video Keypad's original manual or contact Chamberlain customer support.

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റി വിവരങ്ങൾ

This myQ Smart Garage Door Video Keypad Wired Power Adapter Kit comes with a 1 വർഷത്തെ വാറൻ്റി from the manufacturer, Chamberlain Group. Please retain your proof of purchase for warranty claims.

പിന്തുണ

For technical support, product inquiries, or warranty service, please contact Chamberlain Group customer support. Visit the official Chamberlain webബന്ധപ്പെടാനുള്ള വിശദാംശങ്ങൾക്കും അധിക ഉറവിടങ്ങൾക്കുമായി സൈറ്റ്.

നിങ്ങൾക്ക് കൂടുതൽ വിവരങ്ങളും പിന്തുണയും ഇവിടെ കണ്ടെത്താനാകും ആമസോണിലെ ചേംബർലെയ്ൻ സ്റ്റോർ.