XINLEI Universal Pedestal TV Stand

1. ആമുഖം

This instruction manual provides detailed guidance for the assembly, operation, and maintenance of your XINLEI Universal Pedestal TV Stand, Model TS004H. This stand is designed to securely hold televisions ranging from 32 to 75 inches, with a maximum weight capacity of 132 lbs (60 kg) and VESA compatibility from 100x100mm to 600x400mm. Please read this manual thoroughly before installation to ensure safe and correct usage.

2 സുരക്ഷാ വിവരങ്ങൾ

• ഭാരം ശേഷി: Do not exceed the maximum weight capacity of 132 lbs (60 kg). Overloading can result in instability and potential injury.
• ടിവി വലുപ്പം: This stand is suitable for TVs between 32 and 75 inches. Ensure your TV's VESA pattern is within the supported range (100x100mm to 600x400mm).
• സ്ഥിരത: Always place the TV stand on a flat, stable, and level surface. Avoid placing it on uneven ground or near edges where it could be easily tipped.
• കുട്ടികളും വളർത്തുമൃഗങ്ങളും: Keep children and pets away from the TV stand during assembly and ensure the TV is securely mounted to prevent accidental tipping.
• പതിവ് പരിശോധനകൾ: എല്ലാ സ്ക്രൂകളും കണക്ഷനുകളും ഇറുകിയതും സുരക്ഷിതവുമാണെന്ന് ഉറപ്പാക്കാൻ ഇടയ്ക്കിടെ പരിശോധിക്കുക.
• നാശം: If any part of the stand is damaged or missing, do not proceed with assembly. Contact customer support for assistance.

3. പാക്കേജ് ഉള്ളടക്കം

Before beginning assembly, verify that all components are present and undamaged. Refer to the included hardware list in your package for specific part identification. Typical components include:

• ബേസ് പ്ലേറ്റ് (ടെമ്പർഡ് ഗ്ലാസ്)
• പിന്തുണ സ്തംഭം
• ടിവി മൗണ്ടിംഗ് ബ്രാക്കറ്റുകൾ
• VESA Adapters (if applicable)
• Hardware Kit (screws, washers, spacers, nuts, Allen keys)
• കേബിൾ മാനേജ്മെന്റ് ക്ലിപ്പുകൾ
• നോൺ-സ്ലിപ്പ് പാഡുകൾ

4. സജ്ജീകരണവും അസംബ്ലിയും

Assembly typically takes approximately 15 minutes. Follow the numbered steps provided in your physical instruction manual. The following images illustrate key aspects of the assembly process and product features.

Figure 4.1: Product Dimensions and Compatibility. This diagram illustrates the overall dimensions of the stand, its VESA compatibility (Min 100x100mm, Max 600x400mm), and maximum supported TV weight (132 lbs) for TVs between 32 and 75 inches.

Figure 4.2: Compatibility Check. Before assembly, confirm your TV's size (32-75 inches), VESA pattern (Max 600x400mm, Min 100x100mm), and weight (Max 110lbs, note: product specs state 132lbs, refer to product specifications for accurate weight limit).

Figure 4.3: Stable and Durable Base. The stand features a large, solid tempered glass base and a sturdy steel pillar for enhanced stability.

1. നോൺ-സ്ലിപ്പ് പാഡുകൾ ഘടിപ്പിക്കുക: Apply the provided non-slip pads to the bottom of the tempered glass base to prevent scratching surfaces and enhance stability.
2. Assemble Pillar to Base: Securely attach the main support pillar to the tempered glass base using the designated screws and tools.
3. ടിവി ബ്രാക്കറ്റുകൾ ടിവിയിൽ ഘടിപ്പിക്കുക: Mount the TV mounting brackets to the back of your television using the appropriate VESA screws, washers, and spacers from the hardware kit. Ensure the brackets are centered and securely fastened.
4. Mount TV to Pillar: Carefully lift your TV and hook the mounted brackets onto the support pillar. Ensure the TV is level and securely seated.
5. Secure TV with Safety Screws: Insert and tighten the safety screws at the bottom of the TV brackets to prevent accidental dislodging of the TV from the stand.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Figure 5.1: Height Adjustment. The stand offers 5 levels of height adjustment, ranging from 36.3 to 44.1 inches (measured from the floor to the center of the bracket).

Figure 5.2: Cable Management and Safety Features. This image highlights the cable clips for organization, the safety screw mechanism, and the non-slip pads on the base.

• ഉയരം ക്രമീകരിക്കൽ: The stand offers 5 mounting height options, allowing you to adjust the TV height from 36.3 to 44.1 inches (from the floor to the bracket center). To adjust, carefully remove the TV, reposition the mounting brackets on the pillar to the desired height, and re-secure the TV.
• കേബിൾ മാനേജുമെന്റ്: Utilize the integrated cable clips on the support pillar to route and organize your TV and device cables, maintaining a tidy appearance.
• പ്ലേസ്മെൻ്റ്: The compact design allows for versatile placement, either as a standalone unit or positioned behind a TV cabinet, optimizing space in various room sizes.

6. പരിപാലനം

• വൃത്തിയാക്കൽ: Use a soft, dry cloth to clean the stand. For the tempered glass base, a glass cleaner can be used. Avoid abrasive cleaners or solvents that may damage the finish.
• ഹാർഡ്‌വെയർ പരിശോധന: Periodically inspect all screws and connections to ensure they are tight. Re-tighten if necessary to maintain stability.
• സ്ഥലംമാറ്റം: When moving the TV stand, always lift it carefully. Avoid dragging the stand, especially with a TV mounted, to prevent damage to the stand or flooring.

7. പ്രശ്‌നപരിഹാരം

• Stand is Unstable:
  • Ensure the stand is placed on a flat, level surface.
  • Verify all assembly screws are securely tightened.
  • Confirm the TV weight does not exceed 132 lbs (60 kg).
• TV Does Not Fit Brackets:
  • Check your TV's VESA mounting pattern against the stand's compatibility (100x100mm to 600x400mm).
  • Ensure you are using the correct screws, washers, and spacers for your TV model.
• നഷ്ടപ്പെട്ടതോ കേടായതോ ആയ ഭാഗങ്ങൾ:
  • Review the package contents list. If parts are missing or damaged, contact XINLEI customer service for replacements.

8 സ്പെസിഫിക്കേഷനുകൾ

9. വാറൻ്റിയും പിന്തുണയും

XINLEI is committed to providing quality products. If you encounter any issues with your TV stand, including damage during shipment or missing parts, please contact our customer service team. We are available to assist with refunds, replacements, or any product-related inquiries.

For support, please refer to the contact information provided with your purchase or visit the official XINLEI webസൈറ്റ്.