Baseus PrimeTrip C02 Go Magnetic Phone Holder User Manual

1. ആമുഖം

The Baseus PrimeTrip C02 Go Magnetic Phone Holder is designed to securely mount your smartphone in your vehicle. It features a powerful magnetic attraction and an upgraded 3M adhesive for stable installation on various flat surfaces within your car. This manual provides instructions for proper installation, operation, and maintenance of your device.

ചിത്രം 1.1: കഴിഞ്ഞുview of the Baseus PrimeTrip C02 Go Magnetic Phone Holder. The holder is black with a sleek, curved design, featuring a circular magnetic head and a base with a textured surface for dashboard placement.

2. പാക്കേജ് ഉള്ളടക്കം

താഴെ ലിസ്റ്റ് ചെയ്തിരിക്കുന്ന എല്ലാ ഇനങ്ങളും നിങ്ങളുടെ പാക്കേജിൽ ഉൾപ്പെടുത്തിയിട്ടുണ്ടെന്ന് ദയവായി പരിശോധിക്കുക:

• 1 x ബേസിയസ് C02 കാർ മൗണ്ട്
• 2 x 3M പശ ടേപ്പുകൾ (ഒന്ന് മുൻകൂട്ടി പ്രയോഗിച്ചത്, ഒരു സ്പെയർ)
• 1 x Metal Ring (for non-MagSafe compatible phones)
• 1 x Metal Sticker (for attaching the metal ring)
• 1 x Alcohol Pad (for surface preparation)
• 1 x ഉപയോക്തൃ മാനുവൽ

3 സുരക്ഷാ വിവരങ്ങൾ

• Ensure the phone holder is securely mounted and does not obstruct your view of the road or interfere with vehicle controls (e.g., airbags, dashboard indicators).
• Do not install the holder in a location that could become a projectile hazard in the event of an accident.
• Avoid adjusting the holder or your phone while driving. Make all adjustments before starting your journey.
• Keep the magnetic holder away from sensitive electronic devices that may be affected by magnetic fields.

4. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Follow these steps for optimal installation of your Baseus PrimeTrip C02 Go Magnetic Phone Holder:

1. മൗണ്ടിംഗ് സ്ഥലം തിരഞ്ഞെടുക്കുക: Select a flat, clean surface on your dashboard, center console, or windshield. Ensure the chosen location does not obstruct your driving view അല്ലെങ്കിൽ വാഹന നിയന്ത്രണങ്ങൾ.
2. ഉപരിതലം വൃത്തിയാക്കുക: Use the provided alcohol pad to thoroughly clean the chosen mounting surface. Allow it to dry completely before proceeding.
3. Apply the Holder: Peel off the protective film from the 3M adhesive tape on the base of the holder. Firmly press the holder onto the cleaned surface for at least 30 seconds.
4. ഒട്ടിപ്പിടിക്കാൻ അനുവദിക്കുക: For maximum adhesion, allow the 3M adhesive to cure for 24 hours before attaching your phone.
5. For Non-MagSafe Phones: If your phone or phone case is not MagSafe compatible, attach the included metal ring to the back of your phone or phone case using the metal sticker. Ensure it is centered for optimal magnetic connection.

Image 4.1: The phone holder securely installed on a car dashboard, demonstrating its stable placement and the strong 3M VHB tape adhesion, capable of holding up to 1.8kg.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Once installed, operating your phone holder is straightforward:

1. നിങ്ങളുടെ ഫോൺ അറ്റാച്ചുചെയ്യുന്നു: Simply bring your MagSafe-compatible phone (or phone with the metal ring attached) close to the magnetic head of the holder. The powerful magnets will securely snap your phone into place.
2. ക്രമീകരിക്കുന്നു Viewഇൻ ആംഗിൾ: The holder features a 360° rotatable magnetic head, allowing you to switch between portrait and landscape modes. The arm also allows for 180° up and down adjustment to achieve your desired viewing ആംഗിൾ.
3. നിങ്ങളുടെ ഫോൺ വേർപെടുത്തുന്നു: ഫോൺ മാഗ്നറ്റിക് ഹെഡിൽ നിന്ന് പതുക്കെ മാറ്റി വേർപെടുത്തുക.

Image 5.1: The phone holder demonstrating its 360-degree rotation capability, allowing the phone to be positioned in both landscape and portrait orientations for optimal viewing.

Image 5.2: An illustration showing the powerful magnetic attraction of the holder, capable of securely holding a smartphone even on bumpy roads with up to 18N of force.

6 അനുയോജ്യത

The Baseus PrimeTrip C02 Go Magnetic Phone Holder offers wide compatibility:

• MagSafe അനുയോജ്യമായ ഉപകരണങ്ങൾ: Directly compatible with iPhone 15/14/13/12 Pro Plus Max Mini series and other MagSafe-enabled devices or cases.
• Universal Smartphone Compatibility: For all other smartphones, including Samsung, Huawei, Xiaomi, Redmi, HTC, Blackberry, Google Pixel, Sony, LG, OnePlus, Motorola, ZTE, etc., use the included metal ring for magnetic attraction.
• വാഹന അനുയോജ്യത: Applicable to all cars, installable on any flat surface such as the dashboard, center console, or windshield.

Image 6.1: The phone holder positioned in front of various car models, illustrating its wide compatibility and suitability for installation in any vehicle.

7. പരിപാലനം

To ensure the longevity and optimal performance of your phone holder:

• Clean the holder regularly with a soft, dry cloth to remove dust and debris.
• Avoid using harsh chemicals or abrasive cleaners, as these can damage the material.
• If the adhesive needs to be replaced, use the spare 3M adhesive tape provided in the package. Ensure the surface is clean and dry before applying new adhesive.

8. പ്രശ്‌നപരിഹാരം

• Issue: Phone not holding securely.
  പരിഹാരം: Ensure your phone is MagSafe compatible or has the metal ring properly attached and centered. Check for any obstructions between the phone and the holder.
• Issue: Adhesive not sticking.
  പരിഹാരം: Ensure the mounting surface was thoroughly cleaned with the alcohol pad and completely dry before application. Press firmly for at least 30 seconds and allow 24 hours for the adhesive to cure. If issues persist, use the spare 3M adhesive tape.
• Issue: Holder feels loose.
  പരിഹാരം: Re-check the adhesive bond. If necessary, remove the holder, clean the surface, and reapply with a new 3M adhesive tape.

9 സ്പെസിഫിക്കേഷനുകൾ

10. വാറൻ്റിയും പിന്തുണയും

വാറന്റി വിവരങ്ങൾക്കോ ​​സാങ്കേതിക പിന്തുണയ്ക്കോ, ദയവായി നിങ്ങളുടെ ഉൽപ്പന്നത്തിനൊപ്പം ഉൾപ്പെടുത്തിയിരിക്കുന്ന വാറന്റി കാർഡ് പരിശോധിക്കുക അല്ലെങ്കിൽ ഔദ്യോഗിക ബേസിയസ് സന്ദർശിക്കുക. website. You may also contact Baseus customer service directly for assistance.