HOLEWOR Biometric Pistol Safe Instruction Manual

ആമുഖം

This manual provides comprehensive instructions for the safe and effective use of your HOLEWOR Biometric Pistol Safe. This safe is designed to provide secure storage for firearms while allowing quick access through biometric fingerprint recognition, a digital passcode, or a traditional key. Please read this manual thoroughly before installation and operation to ensure proper functionality and safety.

സുരക്ഷാ വിവരങ്ങൾ

WARNING: Responsible firearm storage is critical to prevent accidents and unauthorized access, especially by children. Always store firearms unloaded and separate from ammunition if possible. Keep keys and access codes confidential and out of reach of unauthorized individuals.

• Ensure the safe is securely mounted according to the instructions to prevent removal.
• Never store loaded firearms in a manner that could lead to accidental discharge during access.
• Regularly check the battery level to ensure continuous operation.
• Do not share access codes or allow unauthorized individuals to register their fingerprints.

Image: The HOLEWOR Biometric Pistol Safe mounted on a shelf, out of reach of a child, emphasizing secure storage.

പാക്കേജ് ഉള്ളടക്കം

പാക്കേജിൽ എല്ലാ ഇനങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:

• HOLEWOR Biometric Pistol Safe
• മൗണ്ടിംഗ് ഹാർഡ്‌വെയർ (സ്ക്രൂകൾ, ആങ്കറുകൾ)
• Emergency Override Keys (2)
• AA ബാറ്ററികൾ (4)
• നിർദ്ദേശ മാനുവൽ (ഈ പ്രമാണം)

സ്പെസിഫിക്കേഷനുകൾ

Image: The safe's interior capacity, capable of storing a pistol up to 8.5 inches in length.

സജ്ജമാക്കുക

1. ബാറ്ററി ഇൻസ്റ്റാളേഷൻ

1. Locate the battery compartment, typically on the back or underside of the safe.
2. കമ്പാർട്ട്മെന്റ് കവർ തുറക്കുക.
3. ശരിയായ പോളാരിറ്റി (+/-) ഉറപ്പാക്കിക്കൊണ്ട് 4 AA ബാറ്ററികൾ ഇടുക.
4. ബാറ്ററി കമ്പാർട്ട്മെൻ്റ് കവർ സുരക്ഷിതമായി അടയ്ക്കുക.
5. The LCD display should activate, indicating successful battery installation.

2. സേഫ് മൌണ്ട് ചെയ്യുന്നു

The HOLEWOR Biometric Pistol Safe is designed for vertical mounting. The mounting bracket can be positioned for left or right-side access.

1. Choose a secure location for mounting, such as a nightstand, bed frame, desk, wall, or dresser. Ensure the surface is sturdy enough to support the safe's weight and contents.
2. Position the mounting bracket against the desired surface and mark the screw holes.
3. Drill pilot holes if necessary, then secure the mounting bracket using the provided screws and anchors.
4. Align the safe with the mounted bracket and slide it into place until it locks securely. Ensure there is no wiggling.

ചിത്രം: ഉദാamples of the safe mounted vertically on a shelf, illustrating the ease of installation.

Image: The safe mounted to a nightstand for convenient bedside access.

Image: The safe mounted to a side wall, demonstrating flexible placement options.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

ചിത്രം: കഴിഞ്ഞുview of the three access methods: fingerprint, passcode, and key.

1. Initial Setup (First Fingerprint & Passcode)

Upon first use or after a factory reset, you will need to register your primary fingerprint and set a passcode.

1. Registering Fingerprint: Follow the on-screen prompts or refer to the quick start guide for specific steps to register your fingerprint. Typically, this involves pressing the fingerprint sensor multiple times from different angles until registered.
2. Setting Passcode: Use the keypad to enter a desired passcode (e.g., 4-8 digits) and confirm it.

2. Biometric Fingerprint Access

1. നിങ്ങളുടെ രജിസ്റ്റർ ചെയ്ത വിരൽ ഫിംഗർപ്രിന്റ് സെൻസറിൽ ഉറപ്പിച്ചു വയ്ക്കുക.
2. The safe will verify your fingerprint. A green light and an audible beep (if not in silent mode) will indicate successful recognition.
3. The drawer will slide open, providing access to the firearm.

Image: Using biometric fingerprint for quick access.

3. Passcode Access

1. Enter your registered passcode using the keypad.
2. Press the confirmation button (usually '#' or 'Enter').
3. The safe will verify the passcode. A green light and an audible beep will indicate successful entry.
4. The drawer will slide open.

Image: Entering a passcode on the safe's keypad.

4. Key Access (Emergency Backup)

1. Locate the emergency keyhole, typically concealed on the safe.
2. Insert one of the provided backup keys into the keyhole.
3. Turn the key to unlock the safe.
4. The drawer will slide open.

Image: Using the physical key for emergency access.

5. LCD Display Features

The integrated LCD display provides important information:

• താപനില: Displays the internal temperature of the safe.
• ഈർപ്പം: Shows the internal humidity level. If humidity is too high, consider adding desiccant packs.
• ബാറ്ററി നില: Indicates the current battery status, allowing timely replacement.

Image: The LCD display showing temperature, humidity, and battery status.

6. LED Light & Silent Mode

• ആന്തരിക LED ലൈറ്റ്: The safe features an internal LED light that automatically illuminates when the drawer opens, providing visibility in low-light conditions. It typically stays on for approximately 10 seconds.
• നിശ്ശബ്ദമായ മോഡ്: The safe can be set to silent mode to disable audible beeps during operation. Refer to the quick start guide for instructions on how to activate/deactivate silent mode. This feature is useful in situations where discretion is required.

Image: The safe with its internal LED light active and indicators for silent mode.

മെയിൻ്റനൻസ്

• ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ: When the LCD display indicates low battery, replace all 4 AA batteries promptly to ensure continuous functionality. Do not mix old and new batteries.
• ഈർപ്പം നിയന്ത്രണം: Monitor the humidity level on the LCD display. If it consistently reads high, consider placing a desiccant pack inside the safe to prevent moisture buildup, which can damage firearms.
• വൃത്തിയാക്കൽ: Wipe the exterior of the safe with a soft, dry cloth. Avoid abrasive cleaners or solvents. Keep the fingerprint sensor clean and free of debris.
• കീ സ്റ്റോറേജ്: Store emergency keys in a secure location away from the safe, but accessible in case of electronic failure or battery depletion.

ട്രബിൾഷൂട്ടിംഗ്

• Safe Does Not Open with Fingerprint/Passcode:
  • Ensure batteries are not low. Replace if necessary.
  • Ensure your finger is clean and dry, and placed correctly on the sensor.
  • Verify the passcode is entered correctly.
  • Use the emergency key as a backup.
• എൽസിഡി ഡിസ്പ്ലേ പ്രവർത്തിക്കുന്നില്ല:
  • ബാറ്ററി ഇൻസ്റ്റാളേഷൻ പരിശോധിക്കുക, ആവശ്യമെങ്കിൽ ബാറ്ററികൾ മാറ്റിസ്ഥാപിക്കുക.
• ഡ്രോയർ സുഗമമായി തെന്നിമാറുന്നില്ല:
  • Ensure no obstructions are blocking the drawer mechanism.
  • Check that the safe is mounted level and securely.

വാറൻ്റിയും പിന്തുണയും

For warranty information and customer support, please refer to the documentation provided with your purchase or contact HOLEWOR customer service directly. Specific warranty terms may vary by region and retailer.