മാനുവലുകൾ+

GLEDOPTO GL-C-015WL-D

GLEDOPTO ESP32 WLED Digital LED Controller with Mic / UART User Manual

മോഡൽ: GL-C-015WL-D

1. ആമുഖം

This manual provides essential instructions for the installation, operation, and maintenance of your GLEDOPTO ESP32 WLED Digital LED Controller (Model GL-C-015WL-D). Please read this manual thoroughly before using the product to ensure proper function and safety.

2 പ്രധാനപ്പെട്ട സുരക്ഷാ വിവരങ്ങൾ

  • The controller chip is ESP32. Verify firmware version information carefully before upgrading. Incorrect firmware upgrades can damage the product.
  • ഇൻപുട്ട് വോളിയം ഉറപ്പാക്കുകtage (5-24V DC) matches your power supply and LED strip requirements.
  • Do not exceed the maximum output current of 10A per channel or 15A total.
  • Operate the device within the specified temperature range of -20 to 45 °C.
  • ഈ ഉൽപ്പന്നം ഇൻഡോർ ഉപയോഗത്തിനായി മാത്രം രൂപകൽപ്പന ചെയ്തിട്ടുള്ളതാണ്.
  • ഏതെങ്കിലും വയറിംഗ് അല്ലെങ്കിൽ അറ്റകുറ്റപ്പണി നടത്തുന്നതിന് മുമ്പ് വൈദ്യുതി വിച്ഛേദിക്കുക.

3. ഉൽപ്പന്നം കഴിഞ്ഞുview

3.1 പാക്കേജ് ഉള്ളടക്കം

  • 1 x GLEDOPTO ESP32 WLED Digital LED Controller with Mic / UART (Model: GL-C-015WL-D)
  • 1 x ഉപയോക്തൃ മാനുവൽ
  • 1 x 3cm Damper

3.2 പ്രധാന സവിശേഷതകൾ

  • ESP32 Chip: High-performance processing and stable network connectivity.
  • സംയോജിത മൈക്രോഫോൺ: Captures ambient sounds for music synchronization and dynamic lighting effects.
  • UART Download Port: Facilitates firmware upgrades and debugging without complex hardware operations.
  • Simple Wiring & Expandability: Easy connection ports and an added IO33 port for customization.
  • Rich Dynamic Modes: Over 100 dynamic lighting effects available.
  • വിശാലമായ അനുയോജ്യത: Supports various addressable LED strips including WS2811, WS2812, WS2812B, FL19038, SK6812, SM16703P, SM16703SP3, TM1814, WS2813, WS2815, and FCOB.
  • കുറഞ്ഞ വൈദ്യുതി ഉപഭോഗം: Integrated switching regulator for ESP32 power and a MOSFET relay to disable output power when WLED is off.

4 സ്പെസിഫിക്കേഷനുകൾ

മോഡൽ നമ്പർജിഎൽ-സി-015ഡബ്ല്യുഎൽ-ഡി
ഇൻപുട്ട് വോളിയംtageഡിസി ക്സനുമ്ക്സ-ക്സനുമ്ക്സവ്
Max Addressable ICs800
ഓരോ ചാനലിനുമുള്ള ഔട്ട്‌പുട്ട് കറന്റ്പരമാവധി 10A
മൊത്തം ഔട്ട്പുട്ട് കറന്റ്പരമാവധി 15A
അളവുകൾ108 x 45 x 18 മിമി
പ്രവർത്തന താപനില-20 മുതൽ 45 ഡിഗ്രി സെൽഷ്യസ് വരെ
Supported LED Strip ICsWS2811, WS2812, WS2812B, FL19038, SK6812, SM16703P, SM16703SP3, TM1814, WS2813, WS2815, FCOB, etc.
കണക്റ്റിവിറ്റിWiFi (ESP32)
പ്രത്യേക സവിശേഷതകൾDimmable, Microphone Function, UART Port

5. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

5.1 കൺട്രോളർ ലേഔട്ട്

GLEDOPTO ESP32 WLED Digital LED Controller, top view showing input/output terminals, model number, and features.
Figure 1: GLEDOPTO ESP32 WLED Digital LED Controller. This image displays the top view of the controller, highlighting its input and output terminals, model number (GL-C-015WL-D), and various features such as the UART port and microphone icon.

5.2 വയറിംഗ് നിർദ്ദേശങ്ങൾ

Follow these steps for proper wiring of your LED strip to the controller:

Wiring diagram for GLEDOPTO WLED controller showing VCC, DATA, and GND connections.
Figure 2: Wiring Diagram. This image shows the top view of the GLEDOPTO controller with wires connected, illustrating the V=VCC, D=DATA, and G=GND connections. It indicates that the group of D for GPIO16 is the default output and should be used first.
  • Connect the positive (+) terminal of your power supply to the V+ input on the controller.
  • Connect the negative (-) terminal of your power supply to the V- input on the controller.
  • Connect the VCC wire from your LED strip to the V output terminal on the controller.
  • Connect the DATA wire from your LED strip to the D (GPIO16) output terminal on the controller. This is the default output. The other D (GPIO2) can be used after configuration in the app.
  • Connect the GND wire from your LED strip to the G output terminal on the controller.

5.3 Quick Connect Port Design

The controller features a quick connect port design for convenient wiring:

Three-step guide to quick connect wiring for the LED controller.
Figure 3: Quick Connect Port Design. This image illustrates the three steps for wiring: 1. Open the connector upwards, 2. Press down after inserting the wire, and 3. Shows the completed wiring with wires securely in place, indicating the product is ready for use.
  1. Open the connector upwards.
  2. Insert the stripped wire into the port.
  3. Press down on the connector to secure the wire.

6. ഓപ്പറേഷൻ

6.1 ബട്ടൺ പ്രവർത്തനങ്ങൾ

The controller has two physical buttons for basic control:

GLEDOPTO controller highlighting Restart and Opt buttons with their functions.
Figure 4: Button Functions. This close-up image of the GLEDOPTO controller highlights the 'Restart' and 'Opt' buttons. It details that the 'Restart' button powers off and on the controller, useful for restarting after microphone configuration. The 'Opt' button has functions for short press (power on/off), long press for 1 second (switch colors), and long press for 10 seconds (reset WLED controller and activate WLED-AP hotspot).
  • പുനരാരംഭിക്കുക ബട്ടൺ: Pressing this button will temporarily power off the controller module. Releasing it will power it back on. This is useful for restarting the controller after configuring the microphone or other settings.
  • Opt Button:
    • ഷോർട്ട് പ്രസ്സ്: ഉപകരണം ഓൺ അല്ലെങ്കിൽ ഓഫ് ചെയ്യുന്നു.
    • ദീർഘനേരം അമർത്തുക (1 സെക്കൻഡ്): Switches between available colors or effects.
    • ദീർഘനേരം അമർത്തുക (10 സെക്കൻഡ്): Resets the WLED controller and activates the WLED-AP hotspot for initial setup or re-configuration.

6.2 ആപ്പ് നിയന്ത്രണം

The GLEDOPTO controller is primarily managed through the WLED application, offering extensive control over your LED strips.

6.2.1 ഡൈനാമിക് ഇഫക്റ്റുകൾ

The WLED app provides access to over 100 dynamic lighting effects, allowing for personalized ambiance.

Smartphone displaying the WLED app interface with a list of dynamic lighting effects.
Figure 5: Dynamic Effects in WLED App. This image shows a smartphone screen displaying the WLED application interface, listing various dynamic lighting effects such as Solid, Android, Aurora, Blends, Blink, and Bouncing Balls, demonstrating the wide range of options available.

6.2.2 Segmented Color Control

Customize individual segments of your LED strip to display different colors simultaneously.

Bedroom scene with an LED strip behind the bed showing segmented color control.
Figure 6: Segmented Color Control. This image depicts a bedroom setting with an LED strip installed behind the bed, showcasing the segmented color control feature where different sections of the strip illuminate with distinct colors, allowing for personalized lighting designs.

6.2.3 Microphone Function

The built-in microphone allows the LED lights to synchronize with music or ambient sounds, creating immersive audio-reactive lighting experiences.

People dancing in a living room with LED lights reacting to music.
Figure 7: Microphone Function in Action. This image shows a mother and child dancing in a living room, which is illuminated by colorful LED lights that are reacting to music, demonstrating the controller's microphone function for audio-reactive lighting.
GLEDOPTO WLED controller in a kitchen setting with musical notes, emphasizing the microphone feature.
Figure 8: Built-in Sensitive Microphone. This lifestyle image places the GLEDOPTO WLED controller in a modern kitchen environment, with colorful musical notes emanating from it, visually emphasizing the built-in sensitive microphone feature that allows lights to react to sound.

6.3 അലക്സാ ഇന്റഗ്രേഷൻ

The controller supports integration with Amazon Alexa for voice control. Follow these steps to connect:

Screenshots detailing steps to connect the WLED controller with Amazon Alexa.
Figure 9: Steps for Connecting with Alexa. This image presents a series of smartphone screenshots, guiding users through the process of integrating the WLED controller with Amazon Alexa. It shows navigating through WLED app settings to enable Alexa emulation and then using the Amazon Alexa app to discover and add the device.
  1. Go to the control page of the WLED controller in the app, click on the "Config" button in the top right corner to enter the settings, and then click on "Sync Interfaces".
  2. Scroll up to find "Alexa Voice Assistant", check the box next to "Emulate Alexa device", and then save.
  3. After successfully saving, power cycle the WLED controller once by turning it off and on.
  4. Open the Amazon Alexa app, click on the "Devices" page at the top right corner on the "+" sign, and then click "Add Device".
  5. Then, scroll up and click on "Other" to enter, select "Wi-Fi", and then click "Discover Devices" to search for lights.

7. ഫേംവെയർ അപ്ഡേറ്റുകൾ

The integrated UART port allows for convenient firmware updates. Refer to the official WLED documentation or GLEDOPTO support resources for detailed instructions on how to perform firmware updates. Always ensure you are using the correct firmware version for your ESP32 chip to prevent damage.

8. പരിപാലനം

  • കൺട്രോളർ വൃത്തിയായും പൊടി രഹിതമായും സൂക്ഷിക്കുക. വൃത്തിയാക്കാൻ ഉണങ്ങിയതും മൃദുവായതുമായ തുണി ഉപയോഗിക്കുക.
  • കൺട്രോളർ ഈർപ്പത്തിനോ തീവ്രമായ താപനിലയ്‌ക്കോ വിധേയമാകുന്നത് ഒഴിവാക്കുക.
  • അമിതമായി ചൂടാക്കുന്നത് തടയാൻ ഉപകരണത്തിന് ചുറ്റും ശരിയായ വായുസഞ്ചാരം ഉറപ്പാക്കുക.

9. പ്രശ്‌നപരിഹാരം

  • കൺട്രോളർ പവർ ഓൺ ചെയ്യുന്നില്ല: Check power supply connections and ensure the input voltage 5-24V DC പരിധിയിലാണ്.
  • LED സ്ട്രിപ്പ് പ്രകാശിക്കുന്നില്ല: Verify all wiring connections (VCC, DATA, GND) are secure and correct. Ensure the LED strip type is supported by the controller.
  • Wi-Fi കണക്ഷൻ ഇല്ല: Perform a long press (10 seconds) on the Opt button to reset the controller and activate the WLED-AP hotspot for re-configuration. Ensure your router is operating on a 2.4GHz band.
  • Alexa integration issues: Double-check that "Emulate Alexa device" is enabled in the WLED app settings and that you have power cycled the controller after saving. Ensure the Alexa app is discovering devices on the correct network.
  • Incorrect colors or effects: Verify the LED strip type and IC settings in the WLED app.

10. വാറൻ്റിയും പിന്തുണയും

For warranty information and technical support, please refer to the GLEDOPTO official webസൈറ്റിൽ ബന്ധപ്പെടുക അല്ലെങ്കിൽ നിങ്ങളുടെ റീട്ടെയിലറെ ബന്ധപ്പെടുക. വാറന്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.

അനുബന്ധ രേഖകൾ - ജിഎൽ-സി-015ഡബ്ല്യുഎൽ-ഡി

പ്രീview GLEDOPTO GL-C-017WL-D ESP32 WLED ഡിജിറ്റൽ LED കൺട്രോളർ ഉപയോക്തൃ നിർദ്ദേശം
User instructions for the GLEDOPTO GL-C-017WL-D ESP32 WLED Digital LED Controller with 4 outputs. Covers product parameters, wiring, app setup, configuration (LED strip, relay, mic), button functions, reset procedures, UART download, supported chips, and troubleshooting.
പ്രീview GLEDOPTO WLED Series LED Strip Controller User Instruction Manual
User manual for the GLEDOPTO WLED Series ESP32 Digital LED Strip Controller (Models GL-C-015WL, GL-C-015WL-M, GL-C-015WL-D). Covers product specifications, wiring, app setup, configuration, troubleshooting, and safety information.
പ്രീview GLEDOPTO WLED Series LED Strip Controller User Instruction
User manual for GLEDOPTO WLED Series LED Strip Controllers (GL-C-014WL, GL-C-015WL, GL-C-015WL-M, GL-C-015WL-D), covering wiring, app configuration, troubleshooting, and features.
പ്രീview GLEDOPTO WLED LED കൺട്രോളറുകൾ ഉപയോക്തൃ മാനുവലും സാങ്കേതിക സവിശേഷതകളും
GLEDOPTO ESP32, ESP8266 WLED ഡിജിറ്റൽ LED കൺട്രോളറുകൾക്കായുള്ള സമഗ്രമായ ഉപയോക്തൃ മാനുവലും സാങ്കേതിക സവിശേഷതകളും, സജ്ജീകരണം, കോൺഫിഗറേഷൻ, ട്രബിൾഷൂട്ടിംഗ്, അനുസരണ വിവരങ്ങൾ എന്നിവ ഇതിൽ ഉൾപ്പെടുന്നു.
പ്രീview GLEDOPTO Tuya SPI പിക്സൽ കൺട്രോളർ GL-SPI-206W ഉപയോക്തൃ മാനുവൽ
User manual for the GLEDOPTO Tuya SPI Pixel Controller (GL-SPI-206W), detailing product parameters, button functions, wiring diagrams, setup for Wi-Fi and Bluetooth, supported chips, app functions (chip quantity, color order, segment control, music, scenes, DIY, schedule, do not disturb, group control), RF remote configuration, and safety precautions.
പ്രീview GLEDOPTO ESP32 WLED Digital LED Controller User Instruction
User instructions for the GLEDOPTO ESP32 WLED Digital LED Controller (GL-C-016WL-D), covering wiring, app configuration, relay and mic setup, reset procedures, and troubleshooting.