ILIFE Robotic Vacuum Cleaner Original Side Brushes

ആമുഖം

This instruction manual provides essential information for the proper installation, operation, and maintenance of your new ILIFE Original Side Brushes. Please read this manual thoroughly before use to ensure optimal performance and longevity of the brushes and your robotic vacuum cleaner. Keep this manual for future reference.

അനുയോജ്യത

These original ILIFE side brushes are designed for use with the following ILIFE robotic vacuum cleaner models:

• ILIFE A40
• ILIFE A4s
• ILIFE S5
• ILIFE S5 Pro
• ILIFE V4
• ILIFE V5s Pro
• ILIFE V5x

Using these brushes with incompatible models may result in improper fit or reduced cleaning performance.

പാക്കേജ് ഉള്ളടക്കം

നിങ്ങളുടെ പാക്കേജ് ഉൾപ്പെടുന്നു:

• 3 x ILIFE Original Side Brushes (Pack of 3)

Image: The product packaging for ILIFE Robotic Vacuum Cleaner Accessories, showing the brand logo and the text 'Robotic Vacuum Cleaner Accessories'. Below the packaging, three sets of black, three-pronged side brushes are displayed, indicating the contents of the pack.

ഇൻസ്റ്റലേഷൻ നിർദ്ദേശങ്ങൾ

Follow these steps to install or replace the side brushes on your ILIFE robotic vacuum cleaner:

1. പവർ ഓഫ്: Ensure your robotic vacuum cleaner is powered off and disconnected from its charging base before beginning installation.
2. Flip Over: Carefully turn the robotic vacuum cleaner upside down to access the underside.
3. ബ്രഷുകൾ കണ്ടെത്തുക: Identify the existing side brushes (if any) and their mounting points. There are typically two side brushes.
4. Remove Old Brushes (if applicable): If replacing old brushes, gently pull them upwards to detach them from their posts. Some models may require unscrewing a small screw in the center of the brush. Use a screwdriver if necessary.
5. പുതിയ ബ്രഷുകൾ ഇൻസ്റ്റാൾ ചെയ്യുക: Align the central hole of the new side brush with the corresponding post on the vacuum cleaner. Press down firmly until it clicks into place. If your model uses screws, secure the brush with the screw. Ensure the brushes are securely attached and can rotate freely.
6. ആവർത്തിക്കുക: Repeat the process for the second side brush.
7. പവർ ഓൺ: Turn the vacuum cleaner right-side up and power it on to confirm proper installation.

ഓപ്പറേഷൻ

Once installed, the side brushes will automatically operate with your ILIFE robotic vacuum cleaner. Their primary function is to sweep debris, dust, and dirt from edges, corners, and along walls into the vacuum's main cleaning path, ensuring comprehensive floor coverage.

പരിപാലനവും മാറ്റിസ്ഥാപിക്കലും

Regular maintenance of your side brushes is crucial for maintaining optimal cleaning performance:

• വൃത്തിയാക്കൽ: Periodically check the side brushes for tangled hair, threads, or other debris. Carefully remove any obstructions using your fingers or a small cleaning tool.
• പരിശോധന: Inspect the bristles for wear and tear. Over time, bristles may become bent or frayed, reducing their effectiveness.
• മാറ്റിസ്ഥാപിക്കൽ: It is recommended to replace the side brushes every 3-6 months, or sooner if significant wear is observed, to ensure consistent cleaning performance. Refer to the 'Installation Instructions' section for replacement steps.

ട്രബിൾഷൂട്ടിംഗ്

If you encounter issues with your side brushes, refer to the table below:

ഉൽപ്പന്ന സവിശേഷതകൾ

• ബ്രാൻഡ്: ഇലിഫ്
• നിറം: കറുപ്പ്
• ഉൽപ്പന്ന അളവുകൾ: 14L x 14W x 2H Centimeters (approximate, for a single brush)
• ഉൾപ്പെടുത്തിയ ഘടകങ്ങൾ: Side Brush (Pack of 3)
• ഇനത്തിൻ്റെ ഭാരം: 500 ഗ്രാം (ആകെ പാക്കേജ്)
• നിർമ്മാതാവ്: ILIFE Innovations

വാറൻ്റിയും പിന്തുണയും

For warranty information or technical support regarding your ILIFE Original Side Brushes, please refer to the documentation provided with your ILIFE robotic vacuum cleaner or contact ILIFE customer service directly. Contact details for ILIFE Innovations can typically be found on their official webസൈറ്റ് അല്ലെങ്കിൽ ഉൽപ്പന്ന പാക്കേജിംഗിൽ.

Manufacturer Contact: 1800-274-5433