CYCLAMI Bike Speed/Cadence Sensor User Manual

1. ഉൽപ്പന്നം കഴിഞ്ഞുview

The CYCLAMI Bike Speed/Cadence Sensor is a versatile device designed to track your cycling performance. It supports both speed and cadence measurements, connecting wirelessly via ANT+ and Bluetooth to a wide range of cycling computers and fitness applications. Its compact and lightweight design, combined with IPX6 waterproofing, makes it suitable for various riding conditions.

Image 1.1: The CYCLAMI Bike Speed/Cadence Sensor, a compact device for tracking cycling data.

പ്രധാന സവിശേഷതകൾ:

• ഡ്യുവൽ മോഡ്: Functions as either a speed sensor or a cadence sensor. Note: Two sensors are required for simultaneous speed and cadence data.
• വയർലെസ് കണക്റ്റിവിറ്റി: Supports ANT+ and Bluetooth protocols for broad compatibility.
• വിശാലമായ അനുയോജ്യത: Works with popular apps like Zwift, Rouvy, Xoss, Blackbird, Samsung Health, Apple Watch, TrainingPeaks, Navihood, Keep, Nike+, Gudong, and more.
• എളുപ്പമുള്ള ഇൻസ്റ്റാളേഷൻ: Simple attachment to the wheel hub for speed or crank arm for cadence using rubber bands.
• മോടിയുള്ള ഡിസൈൻ: IPX6 waterproof rating and lightweight (8.1g).
• നീണ്ട ബാറ്ററി ലൈഫ്: 270 മണിക്കൂർ വരെ തുടർച്ചയായ ഉപയോഗം.

2. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

2.1 ബാറ്ററി സജീവമാക്കൽ

Before first use, remove the insulating sheet located underneath the battery. This activates the sensor for operation.

Image 2.1: Locate and remove the insulating sheet from the battery compartment before use.

2.2 Switching Between Speed and Cadence Modes

The sensor features a one-touch switch to toggle between speed and cadence modes. Press the small button on the sensor to switch modes. The LED indicator will change color to confirm the active mode:

• ഗ്രീൻ ലൈറ്റ്: സ്പീഡ് മോഡ്
• വൈറ്റ് ലൈറ്റ്: കേഡൻസ് മോഡ്

After switching modes, you may need to reconnect the sensor to your receiving device or application.

Image 2.2: The sensor's LED indicator shows green for speed mode and white for cadence mode.

2.3 Installation for Speed Mode

1. Switch the sensor to Speed Mode (Green LED).
2. Snap the curved rubber patch onto the back of the sensor.
3. Tie the sensor securely to the front or rear wheel hub using the provided rubber band.
4. Open your mobile riding app or cycling computer to search for the device.

Image 2.3: Step-by-step guide for installing the sensor in speed mode on the wheel hub.

2.4 Installation for Cadence Mode

1. Switch the sensor to Cadence Mode (White LED).
2. Snap the curved rubber patch onto the back of the sensor.
3. Tie the sensor securely to the pedal crank arm using the provided rubber band.
4. Open your mobile riding app or cycling computer to search for the device.

Image 2.4: Step-by-step guide for installing the sensor in cadence mode on the crank arm.

3. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

3.1 ഉപകരണങ്ങളുമായും ആപ്ലിക്കേഷനുകളുമായും ജോടിയാക്കൽ

The CYCLAMI sensor supports both Bluetooth and ANT+ protocols, allowing it to connect with a wide range of cycling computers, smartwatches, and fitness applications. Ensure your device's Bluetooth or ANT+ is enabled and follow its instructions to search for and pair with the sensor.

Image 3.1: The sensor is compatible with numerous applications and devices via BLE 5.0 and ANT+ protocols.

3.2 ഡാറ്റ ട്രാൻസ്മിഷൻ

Once paired, the sensor will automatically transmit real-time speed or cadence data to your connected device. Ensure the sensor is within range of your device for continuous data reception.

4. പരിപാലനം

4.1 വാട്ടർപ്രൂഫിംഗ്

The sensor has an IPX6 waterproof rating, meaning it is protected against powerful water jets. It can withstand rain and splashes during cycling. However, it is not designed for submersion in water for extended periods.

Image 4.1: The sensor's IPX6 rating ensures protection against water splashes during rides.

4.2 ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ

The sensor is powered by a replaceable battery, offering up to 270 hours of battery life. When the battery is low, the sensor's performance may degrade or it may stop transmitting data. Refer to the sensor's casing for battery type and replacement instructions. Ensure proper polarity when inserting a new battery.

4.3 വൃത്തിയാക്കൽ

Clean the sensor periodically with a soft, damp cloth. Avoid using abrasive cleaners or solvents that could damage the casing or electronic components.

5. പ്രശ്‌നപരിഹാരം

5.1 Sensor Not Activating/No LED Light

• Check Battery Insulation: Ensure the plastic insulating sheet has been removed from under the battery.
• ബാറ്ററി നില: ബാറ്ററി തീർന്നാൽ അത് മാറ്റിസ്ഥാപിക്കുക.
• ബാറ്ററി ഓറിയന്റേഷൻ: Verify the battery is inserted with the correct polarity.

5.2 Difficulty Pairing with Device

• സെൻസർ മോഡ്: Confirm the sensor is in the correct mode (speed or cadence) for the data you wish to receive.
• Device Bluetooth/ANT+: Ensure Bluetooth or ANT+ is enabled on your receiving device.
• സാമീപ്യം: Keep the sensor close to your receiving device during the pairing process.
• ഇടപെടൽ: തടസ്സമുണ്ടാക്കാൻ സാധ്യതയുള്ള മറ്റ് ഇലക്ട്രോണിക് ഉപകരണങ്ങളിൽ നിന്ന് മാറിനിൽക്കുക.
• റീബൂട്ട്: Try restarting both the sensor (by removing and reinserting the battery) and your receiving device.

5.3 കൃത്യമല്ലാത്ത വായനകൾ

• ഇൻസ്റ്റലേഷൻ: Verify the sensor is securely mounted and correctly positioned according to the installation instructions for the chosen mode (speed on hub, cadence on crank arm).
• Tire Size Calibration (Speed Mode): Ensure your cycling computer or app has the correct wheel circumference entered for accurate speed readings.
• തടസ്സങ്ങൾ: Check for any physical obstructions between the sensor and the magnet (if applicable, though this sensor is magnet-less) or the receiving device.

6 സ്പെസിഫിക്കേഷനുകൾ

7. വാറൻ്റിയും പിന്തുണയും

7.1 വാറൻ്റി വിവരങ്ങൾ

ഈ ഉൽപ്പന്നം എ 1 വർഷം warranty from the date of purchase. The warranty covers manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.

7.2 ഉപഭോക്തൃ പിന്തുണ

For technical assistance, troubleshooting, or warranty inquiries, please refer to the seller's contact information on the platform where the product was purchased. You may also visit the official CYCLAMI brand store for additional resources and support.

CYCLAMI Store: https://www.amazon.com/stores/CYCLAMI/page/A2CA0EF8-4594-4102-A438-7FBC9833393A