MAIMEIMI OBD2 ഹെഡ് അപ്പ് ഡിസ്പ്ലേ മോഡൽ B3 യൂസർ മാനുവൽ

ആമുഖം

This manual provides detailed instructions for the installation, operation, and maintenance of your MAIMEIMI OBD2 Head Up Display Model B3. Please read this manual thoroughly before use to ensure proper functionality and safety.

ഉൽപ്പന്നം കഴിഞ്ഞുview

പ്രധാന സവിശേഷതകൾ

• Multi-Functional Display: Reads vehicle data including time, speed, mileage, travel time, RPM, fuel consumption, voltagഇ, ജലത്തിന്റെ താപനില.
• Multiple Data UI Interfaces: Offers 9 distinct display modes to show single or multiple data points simultaneously.
• 5 Alarm Functions: Includes overspeed, speed, fatigue driving, water temperature, and voltage alarms for enhanced safety.
• Automatic Brightness Adjustment: Features a built-in light sensor for automatic brightness control, with manual adjustment options.

പാക്കേജ് ഉള്ളടക്കം

• OBD2 Head Up Display Unit
• USB കേബിൾ
• ആന്റി-സ്ലിപ്പ് മാറ്റ്
• ഉപയോക്തൃ മാനുവൽ
• Double-sided Adhesive Non-slip Mat

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Compatibility Notice

This OBD heads up display is only applicable to cars that support OBDII and EOBD protocols (cars produced after 2008 began to use OBDII and EOBD). It does not support OBDI and JOBD. The following brands and vehicle types are generally not compatible with the OBD2 system:

• Dodge, JEEP, Sail, Chrysler
• French models, Italian models
• Suzuki, Mazda 6
• Infiniti (QX50, Q50, Q501)
• Toyota Avanza (2013 model)
• Lexus (IS250, EX250, ES300H)
• Honda (Jazz, CRV)
• കിയ
• Hybrid and diesel vehicles
• Pickups, RVs
• Vehicles with modified automotive computers

ഇൻസ്റ്റലേഷൻ ഘട്ടങ്ങൾ

1. ഘട്ടം 1: Locate your vehicle's OBD2 port (typically under the dashboard on the driver's side) and plug in the provided OBD receptacle connector.
2. ഘട്ടം 2: Route the USB cable from the OBD connector, tucking it neatly into the A-pillar seal or along the dashboard edges to conceal it.
3. ഘട്ടം 3: Connect the other end of the USB cable to the HUD unit. Place the HUD securely on your dashboard. If the dashboard surface is inclined, use the provided double-sided adhesive non-slip mat to prevent movement.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

പ്രദർശന പ്രവർത്തനങ്ങൾ

The MAIMEIMI HUD displays a variety of essential driving data. Key indicators include:

• വേഗത: Current vehicle speed (MPH or KM/H).
• ആർപിഎം: Engine revolutions per minute, often shown with a progress bar.
• ജലത്തിൻ്റെ താപനില: Engine coolant temperature (°C or °F).
• വാല്യംtage: വാഹന ബാറ്ററി വോള്യംtage.
• ഇന്ധന ഉപഭോഗം: Real-time fuel usage, sometimes with a progress bar.
• സമയം: നിലവിലെ സമയം.
• Mileage/Driving Distance: Distance traveled during the current trip.
• Travel Time: Duration of the current trip.
• Decorative Mood Lights: Ambient lighting elements for visual appeal.

Multiple Data UI Interfaces

The MAIMEIMI OBD2 Head Up Display offers 9 distinct data UI interfaces. These interfaces allow you to customize the display to show single or multiple driving data points simultaneously, according to your preferences and driving needs. Refer to the image below for examples of available layouts.

അലാറം പ്രവർത്തനങ്ങൾ

The device includes 5 alarm functions designed to enhance driving safety by alerting you to critical conditions. You can adjust the alarm thresholds according to your preferences and local regulations. The HUD will emit an audible alert if any preset value is exceeded.

• അമിത വേഗത അലാറം: Alerts you when your speed exceeds a set limit.
• വാല്യംtagഇ അലാറം: Notifies you if the vehicle's voltage drops below a safe level.
• RPM അലാറം: Warns if engine RPMs exceed a predefined threshold.
• Water Temperature Alarm: Indicates if the engine coolant temperature becomes too high.
• ക്ഷീണം ഡ്രൈവിംഗ് അലാറം: Reminds you to take a break after a set period of continuous driving.

യാന്ത്രിക തെളിച്ച ക്രമീകരണം

The HUD features a built-in light sensor that automatically adjusts the display brightness based on ambient light conditions, ensuring clear visibility day or night. Manual brightness adjustment is also possible through the device settings.

ട്രബിൾഷൂട്ടിംഗ്

Speed Inconsistency Adjustment

If you observe a discrepancy between the HUD's speed reading and your vehicle's speedometer, follow these steps to calibrate the HUD:

1. Enter setup mode 1 on the HUD. The initial value displayed is typically 107.
2. Compare the HUD speed with your vehicle's speedometer. For example, if your vehicle's speedometer reads 100 MPH and the HUD reads 105 MPH (meaning the HUD is 5 MPH faster), you need to adjust the HUD's value.
3. Subtract the observed speed difference from the initial value. In the example, 107 - 5 = 102. Adjust the HUD's setting to 102.
4. This adjustment principle involves adding or subtracting the speed difference from the initial calibration value (107) to match your vehicle's speedometer.

സ്പെസിഫിക്കേഷനുകൾ

മെയിൻ്റനൻസ്

To ensure the longevity and optimal performance of your MAIMEIMI OBD2 Head Up Display, follow these general maintenance guidelines:

• മൃദുവായതും ഉണങ്ങിയതുമായ തുണി ഉപയോഗിച്ച് തുടച്ച് ഉപകരണം വൃത്തിയായി സൂക്ഷിക്കുക. ഉരച്ചിലുകൾ ഉള്ള ക്ലീനറുകളോ ലായകങ്ങളോ ഉപയോഗിക്കുന്നത് ഒഴിവാക്കുക.
• Ensure the display surface is free from dust and smudges for clear projection.
• Avoid exposing the device to extreme temperatures or direct sunlight for prolonged periods when not in use.
• Periodically check the cable connections to ensure they are secure.

വാറൻ്റിയും പിന്തുണയും

For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official MAIMEIMI webസൈറ്റ്. വാങ്ങിയതിന്റെ തെളിവായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.