ആമുഖം
This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of the HALLOMOTOR Speed Unlimited 600C TFT Display. This advanced display is designed to seamlessly integrate with various Bafang mid-drive motors, including M200, M300, M400, M410, M420, M500, M560, M510, M600, M620, M800, and M820 models. It utilizes CAN protocol for reliable communication and offers a vibrant TFT screen for clear data monitoring and customizable settings.
ഉൽപ്പന്നം കഴിഞ്ഞുview
ചിത്രം 1: മുൻഭാഗം view of the HALLOMOTOR 600C TFT Display, showing the screen and control buttons.
Figure 2: The 600C TFT Display, highlighting its CAN version and compatibility with Bafang M200, M300, M400, M410, M420, M500, M510, M560, M600, M620, M800, and M820 motors.
Figure 3: The 600C TFT Display mounted on bicycle handlebars, demonstrating its 2.4-inch HD screen, multi-language support, multi-mode interface, and IP65 waterproof rating.
Figure 4: An installed view of the 600C TFT Display on an electric bicycle, showing its compact design and handlebar mounting.
സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
1. പാക്കേജ് ഉള്ളടക്കം
- 600C TFT Display Unit
- Mounting Bracket (integrated)
- കണക്ഷൻ കേബിൾ
2. ഡിസ്പ്ലേ മൌണ്ട് ചെയ്യൽ
The 600C TFT Display is designed for handlebar mounting. Ensure the handlebar diameter is compatible with the integrated clamp (approximately Ø22.2mm as per dimensions). Position the display centrally for optimal viewing and access to buttons.
- Loosen the mounting screw on the display's integrated clamp.
- Place the display on your bicycle's handlebar in the desired position.
- Tighten the mounting screw securely, ensuring the display is stable and does not rotate freely. Do not overtighten.
Figure 5: Technical dimensions of the 600C TFT Display, showing measurements in millimeters for width, height, and handlebar clamp diameter (Ø22.2mm).
3. വൈദ്യുതി ബന്ധം
Connect the display's cable to the corresponding port on your Bafang mid-drive motor system. Ensure the connectors are clean and dry before mating. The display uses a specific CAN protocol connector (often green, as shown in product images).
- Locate the display connection port on your Bafang motor's wiring harness.
- Align the male and female connectors of the display cable and the motor harness.
- Push firmly until the connectors click into place, ensuring a secure and waterproof seal.
- Route the cable neatly along the handlebars and frame, securing it with cable ties to prevent snagging or damage.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
1. Display Layout and Buttons
The 600C TFT display features a clear screen and intuitive button layout for easy control.
- Power Button (middle): Turns the display and e-bike system on/off.
- Up Button (+): Increases assist level, navigates menus upwards, or increases values.
- Down Button (-): Decreases assist level, navigates menus downwards, or decreases values.
- M Button (Mode): Cycles through display information, enters/exits settings menus.
2. അടിസ്ഥാന പ്രവർത്തനം
- പവർ ഓൺ/ഓഫ്: Press and hold the Power button for approximately 2 seconds to turn the system on or off.
- Changing Assist Levels: Use the Up (+) and Down (-) buttons to adjust the motor's pedal assist level. The current level will be displayed on the screen.
- Cycling Display Information: Press the M button briefly to cycle through various data displays such as speed (current, average, max), distance (trip, total), battery level, and power output.
3. Advanced Settings and Interface Modes
The 600C display supports multiple interface modes and customizable settings. Refer to the on-screen menu for specific options.
ചിത്രം 6: ഉദാamples of multiple interface modes available on the 600C TFT Display, including digital, simulation, basic information, and detailed information views.
- ക്രമീകരണങ്ങൾ ആക്സസ് ചെയ്യുന്നു: Typically, pressing and holding the M button, or a combination of buttons, will enter the settings menu. Follow the on-screen prompts.
- ഇഷ്ടാനുസൃതമാക്കൽ: Within the settings, you may be able to adjust parameters such as wheel diameter, speed unit (km/h or mph), battery voltage, backlight brightness, and password protection.
- ഇൻ്റർഫേസ് മോഡുകൾ: The display offers various visual layouts for data presentation. Navigate to the 'Interface Mode' setting to select your preferred view.
മെയിൻ്റനൻസ്
- വൃത്തിയാക്കൽ: The display is IP65 waterproof. Use a soft, damp സ്ക്രീൻ തുടയ്ക്കാൻ തുണിയും സി.asing. Avoid abrasive cleaners or solvents. Do not use high-pressure water jets directly on the display.
- സംഭരണം: When not in use for extended periods, store the display and e-bike in a cool, dry place, away from direct sunlight and extreme temperatures.
- കേബിൾ പരിശോധന: Periodically check the display cable and connectors for any signs of wear, damage, or corrosion. Ensure connections remain secure.
ട്രബിൾഷൂട്ടിംഗ്
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| Display does not power on. | Low battery, loose connection, system fault. | Check e-bike battery charge. Ensure all cables are securely connected. If problem persists, consult a technician. |
| No speed or distance data. | Speed sensor issue, loose motor connection. | Check speed sensor alignment and connection. Verify motor connection. |
| ഡിസ്പ്ലേ പിശക് കോഡ് കാണിക്കുന്നു. | സിസ്റ്റം തകരാർ. | Note the error code and refer to your motor's manual or contact support for specific meaning and resolution. |
| ബട്ടണുകൾ പ്രതികരിക്കുന്നില്ല. | താൽക്കാലിക സോഫ്റ്റ്വെയർ തകരാർ, ഭൗതിക ക്ഷതം. | Try restarting the display (power off and on). Inspect buttons for physical damage. |
സ്പെസിഫിക്കേഷനുകൾ
- മോഡലിൻ്റെ പേര്: 600C TFT display with CAN protocol
- ബ്രാൻഡ്: ഹാലോമോട്ടർ
- ഡിസ്പ്ലേ തരം: TFT (Thin-Film Transistor)
- സ്ക്രീൻ വലിപ്പം: 2.4-inch (HD display screen)
- പ്രോട്ടോക്കോൾ: CAN (കൺട്രോളർ ഏരിയ നെറ്റ്വർക്ക്)
- അനുയോജ്യത: Bafang Mid Drive Motors (M200, M300, M400, M410, M420, M500, M560, M510, M600, M620, M800, M820)
- മെറ്റീരിയൽ: പ്ലാസ്റ്റിക്
- നിറം: കറുപ്പ്
- മൗണ്ടിംഗ് തരം: Handlebar Mount (Ø22.2mm)
- വാട്ടർപ്രൂഫ് റേറ്റിംഗ്: IP65
- ഉൾപ്പെടുത്തിയ ഘടകങ്ങൾ: LCD 600C CAN
വാറൻ്റിയും പിന്തുണയും
വാറൻ്റി വിവരങ്ങൾ
This product comes with a limited warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the documentation provided with your purchase or contact HALLOMOTOR directly. Keep your proof of purchase for warranty claims.
ഉപഭോക്തൃ പിന്തുണ
If you encounter any issues not covered in this manual or require further assistance, please contact the seller or HALLOMOTOR customer support. Provide your product model number and a detailed description of the issue for efficient service.
