Xtreme 25ft Multicolored LED Strip Lights

ആമുഖം

This manual provides instructions for the Xtreme 25ft Multicolored LED Strip Lights, Model XLS7-1005-MCW. This product features 225 RGBW LEDs, offering 15 distinct colors and 4 dynamic lighting modes. It is designed for indoor use and includes a remote control for convenient operation. Please read this manual thoroughly before installation and use to ensure proper function and safety.

പാക്കേജ് ഉള്ളടക്കം:

ചിത്രം 1: പാക്കേജ് ഉള്ളടക്കങ്ങൾ. The image displays the 25ft LED strip on a reel, flexible connectors, a remote control with two AAA batteries, a set of strip mounting clips and cable mounting clips, a 5V USB power adapter, and the user manual.

• 1 x 25ft Multicolored LED Strip
• 1 x റിമോട്ട് കൺട്രോൾ
• Flexible Connectors (for cutting and reconnecting)
• 1 x 5V USB Power Adapter
• Set of Strip Mounting Clips and Cable Mounting Clips
• ഉപയോക്തൃ മാനുവൽ

പ്രധാനപ്പെട്ട സുരക്ഷാ വിവരങ്ങൾ

• ഈ ഉൽപ്പന്നം രൂപകൽപ്പന ചെയ്തിരിക്കുന്നത് ഇൻഡോർ ഉപയോഗം മാത്രം. വെള്ളത്തിലോ ഈർപ്പത്തിലോ സമ്പർക്കം പുലർത്തരുത്.
• Ensure the power adapter is compatible with your local power supply (5V USB).
• Do not connect the LED strip to power while it is still on the reel. Unroll completely before use.
• Avoid bending the LED strip sharply or applying excessive force, as this may damage the internal circuitry.
• കുട്ടികൾക്ക് ലഭ്യമാകാതെ സൂക്ഷിക്കുക.
• Do not attempt to repair or modify the product. Contact customer support if issues arise.
• Ensure the installation surface is clean, dry, and smooth for optimal adhesive performance.

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

1. ഉപരിതലം തയ്യാറാക്കുക: Clean the desired installation surface thoroughly. Ensure it is dry, smooth, and free of dust or grease.
2. ലേഔട്ട് ആസൂത്രണം ചെയ്യുക: Unroll the LED strip and plan its placement. Avoid sharp bends.
3. സ്ട്രിപ്പ് പ്രയോഗിക്കുക: Peel off a small section of the adhesive backing from the LED strip. Carefully press the strip onto the prepared surface, gradually peeling off more backing as you go. Apply firm, even pressure along the entire length.
4. ക്ലിപ്പുകൾ ഉപയോഗിച്ച് സുരക്ഷിതമാക്കുക (ഓപ്ഷണൽ): For added security, especially on textured surfaces or corners, use the provided mounting clips.
5. Cutting and Reconnecting (Optional):

   If a shorter length is required, the LED strip can be cut at designated cut marks (indicated by a scissor icon or copper pads). Ensure the power is disconnected before cutting.

   

   Figure 2: Cutting the LED Strip. Step 1 shows scissors cutting the strip at a designated mark. The image also shows the remote control and the LED strip's color capabilities.

   To reconnect, align the copper pads of the cut strip with the pins inside a flexible connector. Close the connector securely. Repeat for additional sections or corners.

   

   Figure 3: Using Connectors for Corners. A flexible connector is used to create a clean, professional corner with the LED strip.

6. പവർ ബന്ധിപ്പിക്കുക: Plug the LED strip's USB connector into the provided 5V USB power adapter, then plug the adapter into a standard wall outlet.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The Xtreme LED Strip Lights are controlled using the included remote control.

ചിത്രം 4: റിമോട്ട് കൺട്രോൾ ലേഔട്ട്. The remote features buttons for power, dimming, color selection (15 colors), and four dynamic modes.

വിദൂര നിയന്ത്രണ പ്രവർത്തനങ്ങൾ:

• ഓൺ/ഓഫ്: Press to turn the LED strip lights on or off.
• പുന SE സജ്ജമാക്കുക: Resets the light strip to its default settings.
• DIMMER (Sun Icon): Adjusts the brightness level of the lights. Press repeatedly to cycle through brightness levels.
• COLOR SELECTION: Choose from 15 distinct static colors by pressing the corresponding color button.
• മോഡ് തിരഞ്ഞെടുക്കൽ:
  • ഫ്ലാഷ്: നിറങ്ങളിലൂടെ വേഗത്തിൽ സഞ്ചരിക്കുന്നു.
  • സ്ട്രോബ്: Flashes a single color on and off.
  • ഫേഡ്: നിറങ്ങൾക്കിടയിൽ സുഗമമായ സംക്രമണം.
  • സുഗമമായ: Gradually changes between colors with a softer transition than Fade.
• WHITE LIGHTS: Buttons for COOL, SOFT, WARM, and PURE white light options.

Ensure the remote control is pointed towards the receiver on the LED strip for optimal response.

മെയിൻ്റനൻസ്

• വൃത്തിയാക്കൽ: Disconnect power before cleaning. Gently wipe the LED strip with a dry, soft cloth. Do not use liquid cleaners or abrasive materials.
• സംഭരണം: If storing the LED strip for an extended period, carefully roll it back onto its original reel or a similar circular object to prevent kinks and damage. Store in a cool, dry place.
• പശ: The adhesive backing is designed for single-use application. If the strip needs to be re-positioned, additional mounting clips or a new adhesive solution may be required.

ട്രബിൾഷൂട്ടിംഗ്

ഉൽപ്പന്ന സവിശേഷതകൾ

വാറൻ്റിയും പിന്തുണയും

For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official Xtreme Digital Lifestyle Accessories webസൈറ്റ്.

For general inquiries, you may visit the brand's Amazon store: Xtreme Digital Lifestyle Accessories Store.