ഹെക്‌സ് ഗെയിമിംഗ് ന്യൂ എഡ്ജ് വയർലെസ് കൺട്രോളർ ഇൻസ്ട്രക്ഷൻ മാനുവൽ

1. ഉൽപ്പന്നം കഴിഞ്ഞുview

The HEXGAMING NEW EDGE Wireless Controller is engineered for premium gameplay performance, especially for tactical eSports. It features an upgraded Type-C port for convenient connectivity and charging. Key enhancements include four customizable back buttons, six remapping profiles, and interchangeable thumbsticks for improved grip and accuracy. The controller also boasts Hex hair triggers, reducing activation distance for ultra-fast responses in competitive gaming.

മുന്നിലും പിന്നിലും view of the HEXGAMING NEW EDGE Wireless Controller.

The controller shown with its interchangeable thumbsticks and accessories.

2. സജ്ജീകരണ ഗൈഡ്

2.1 പ്രാരംഭ കണക്ഷൻ

To begin using your HEXGAMING NEW EDGE controller, connect it to your console (e.g., PlayStation 4) or PC using a compatible USB Type-C cable. The indicator light on the controller will remain solid once a successful connection is established.

3. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

3.1 Switching Memory Profiles

The controller supports up to six memory profiles, allowing you to save different button mappings. To switch between profiles, double-click the Setting Button located on the back of the controller. The indicator light will change color to reflect the active profile (e.g., Blue, Green, Cyan, Yellow, Purple, White). Switching to the 7th mode (Non-LED) disables back button functionality.

3.2 Remapping Back Buttons

The NEW EDGE controller features four back buttons (K1, K2, K3, K4) that can be remapped to enhance your gameplay. You can assign up to 14 buttons (X, O, Triangle, Square, Up, Down, Left, Right, L1, L2, R1, R2, L3, R3) to these rear buttons.

1. Enter Mapping Mode: Press and hold the Setting Button for approximately 3 seconds. The indicator light will start flashing rapidly, indicating that Mapping Mode is active.
2. Assign a Button: While in Mapping Mode, press and hold the desired back button (e.g., K1) and simultaneously press the button you wish to map to it (e.g., X button) for 3 seconds. The indicator light will quickly flash red three times, confirming successful mapping. The indicator light will then continue to flash rapidly, awaiting the next setting.
3. Exit Mapping Mode: After completing your mappings, hold down the Setting Button for about 3 seconds to exit Mapping Mode. The indicator light will stay solid, confirming that you have exited Mapping Mode.

You can activate the remap program during gameplay. If you press the same two buttons again, the indicator light will flash slowly three times, indicating that the current mapping for that K button has been cleared.

Visual representation of the 14 buttons that can be assigned to the rear paddles.

3.3 Interchangeable Thumbsticks

Customize your control with eight interchangeable thumbstick options. These include 2 heights and 3 ergonomic designs (domed, concave, concave widened) to improve grip and accuracy based on your preference.

A selection of interchangeable thumbsticks for personalized control.

Diagram showing the various concave and domed thumbstick options available.

3.4 Hair Trigger Clicky

The Hex hair triggers reduce the trigger activation distance to just 1.5mm. This allows for ultra-fast responses, enabling instant full-speed shooting in competitive games, saving valuable milliseconds.

ക്ലോസ് അപ്പ് view of the hair trigger mechanism, highlighting the reduced travel distance.

Diagram illustrating the shortened trigger activation distance of the Hex hair triggers.

4. പരിപാലനം

To ensure the longevity and optimal performance of your HEXGAMING NEW EDGE controller, follow these maintenance guidelines:

• വൃത്തിയാക്കൽ: Regularly wipe the controller with a soft, dry cloth to remove dust and grime. For stubborn dirt, lightly dampen the cloth with water or a mild electronic cleaner. Avoid harsh chemicals or abrasive materials.
• സംഭരണം: Store the controller in a cool, dry place away from direct sunlight, extreme temperatures, and excessive moisture. If not in use for extended periods, consider storing it in its original packaging or a protective case.
• കൈകാര്യം ചെയ്യൽ: Avoid dropping the controller or subjecting it to strong impacts, as this can damage internal components.

5. പ്രശ്‌നപരിഹാരം

If you encounter issues with your HEXGAMING NEW EDGE controller, try the following steps:

• കണക്ഷൻ പ്രശ്നങ്ങൾ:
  • Ensure the USB Type-C cable is securely connected to both the controller and your console/PC.
  • നിങ്ങളുടെ ഉപകരണത്തിൽ മറ്റൊരു USB പോർട്ട് പരീക്ഷിക്കുക.
  • Test with a different USB Type-C cable to rule out cable defects.
  • Restart your console/PC and then reconnect the controller.
• Mapping Not Working:
  • Ensure you are in the correct memory profile. Double-click the Setting Button to cycle through profiles.
  • Re-enter Mapping Mode (hold Setting Button for 3 seconds) and re-map the desired buttons to ensure the process was completed correctly.
  • To clear all K button mappings in the current profile: When the indicator light remains solid (not in mapping mode), press and hold the combination of L1 + R1 + L2 + R2 + Triangle + Square + Cross + Circle for about 5 seconds. The indicator light will turn red and flash slowly three times, indicating that all K button mappings in the current profile have been successfully cleared.
• കൺട്രോളർ പ്രതികരിക്കുന്നില്ല:
  • Ensure the controller is charged. Connect it to a power source.
  • Perform a soft reset by pressing the small reset button located in a pinhole on the back of the controller (requires a paperclip or similar thin object).

6 സ്പെസിഫിക്കേഷനുകൾ

7. വാറൻ്റിയും പിന്തുണയും

Warranty information for your HEXGAMING NEW EDGE Wireless Controller is typically provided with the product packaging or can be found on the official HEXGAMING website. For technical support, troubleshooting assistance, or warranty claims, please refer to the contact information provided by HEXGAMING or the retailer from whom you purchased the product.